iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13856:2002

(Main)

Minimum requirements for the content of the user manual for automotive LPG systems

Minimum requirements for the content of the user manual for automotive LPG systems

This European Standard specifies the minimum requirements for the contents of the user manual for Automotive LPG propulsion systems fitted in road vehicles.
This standard does not cover the user manual for forklift trucks or other industrial machinery.

Anforderungen an den Inhalt von Betriebsanleitungen für Autogasanlagen

Diese europäische Norm legt die Mindestanforderungen fest für den Inhalt der Betriebsanleitung für Autogas-anlagen in Straßenfahrzeugen.
Der Inhalt der Betriebsanleitung für Gabelstapler oder andere industrielle Maschinen liegt nicht im Geltungsbereich dieser europäischen Norm.

Contraintes d'utilisation pour les systèmes GPL pour automobiles

La présente Norme Européenne spécifie les exigences minimales que doivent contenir les manuels d'utilisation des systèmes GPL pour automobiles.

Minimalne zahteve za vsebino navodila za uporabo UNP v sistemih za pogon motornih vozil

General Information

Status
Published
Publication Date
21-May-2002
Withdrawal Date
29-Nov-2002
ICS
43.060.40 - Fuel systems
75.160.30 - Gaseous fuels
Technical Committee
CEN/TC 286 - Liquefied petroleum gas equipment and accessories
Drafting Committee
CEN/TC 286/WG 6 - Automative LPG system
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
19-Jun-2019
Ref Project
SIST EN 13856:2002 - Minimum requirements for the content of the user manual for automotive LPG systems

Buy Standard

EN 13856:2002EN 13856:2002
PreviousNext
Standard
EN 13856:2002
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Minimalne zahteve za vsebino navodila za uporabo UNP v sistemih za pogon motornih vozilAnforderungen an den Inhalt von Betriebsanleitungen für AutogasanlagenContraintes d'utilisation pour les systemes GPL pour automobilesMinimum requirements for the content of the user manual for automotive LPG systems43.060.40Sistemi za gorivoFuel systemsICS:Ta slovenski standard je istoveten z:EN 13856:2002SIST EN 13856:2002en,fr,de01-november-2002SIST EN 13856:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13856May 2002ICS 43.060.40; 75.160.30English versionMinimum requirements for the content of the user manual forautomotive LPG systemsExigences minimales pour le contenu du manuel utilisateurpour les systèmes GPL automobilesMindestanforderungen für den inhalt vonGebrauchsanleitungen für Flüssiggassysteme (LPG)This European Standard was approved by CEN on 1 March 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13856:2002 ESIST EN 13856:2002
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 556-1:2024(Main)
Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 1: Requirements for terminally sterilized medical devices
SIST EN 556-1:2024

This document specifies the requirements for a terminally sterilized medical device to be designated ‘STERILE’. Part 2 of this European standard specifies the requirements for an aseptically processed medical device to be designated "STERILE".
NOTE   For the purpose of the EU Directive(s) for medical devices (see Bibliography), designation of a medical device as ‘STERILE’ is only permissible when a validated sterilization process has been applied. Requirements for validation and routine control of processes for the sterilization of medical devices are specified in EN ISO 11135, EN ISO 11137, EN ISO 14160, EN ISO 14937, EN ISO 17665-1, EN ISO 20857, EN ISO 25424 and ISO 22441.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4827:2024(Main)
Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys
SIST EN 4827:2024

This document specifies the requirements for hexavalent chromium free anodizing of aluminium and aluminium alloys for corrosion protection, bonding and painting.
This document does not apply to hard anodizing and plasma electrolytic anodizing (micro-arc oxidation).
The purpose of this document is to give design, quality and manufacturing requirements. It does not give complete in-house process instructions; these are given in the processor's detailed process instructions.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7218:2024(Main)
Microbiology of the food chain - General requirements and guidance for microbiological examinations (ISO 7218:2024)
SIST EN ISO 7218:2024

This document specifies general requirements and gives guidance on microbiological examinations.
It is applicable to:
—     the implementation of specific horizontal or vertical International Standards developed by ISO/TC 34/SC 9 or ISO/TC 34/SC 5 for detection or enumeration of microorganisms, named hereafter “specific standards”;
—     good laboratory practices for microbiology laboratories testing samples from the food chain;
—     guidance for microbiological laboratories testing samples from the food chain on the technical requirements for conforming to ISO/IEC 17025.
The requirements of this general standard supersede corresponding ones in existing specific standards.
Additional instructions for examinations using the polymerase chain reaction (PCR) are specified in ISO 22174.
This document is applicable to examinations for bacteria, yeasts and moulds and can be used, if supplemented with specific guidance, for parasites and viruses. It does not apply to examinations for toxins or other metabolites (e.g. amines) from microorganisms.
This document is applicable to microbiology of the food chain, from primary production stage to food and animal feed products, including the premises where the food or feed production and handling takes place. It is also applicable to the microbiological examination of water where water is used in food production or is regarded as a food in national legislation.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11890-2:2020/A1:2024(Amendment)
Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method - Amendment 1 (ISO 11890-2:2020/Amd 1:2024)
SIST EN ISO 11890-2:2020/kFprA1:2024
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17950:2024(Main)
Protective helmets - Test methods - Shock absorption including measuring rotational kinematics
kSIST FprEN 17950:2024

This document specifies a test method for helmets that measures the translational and rotational kinematics in impacts of a helmeted headform against an anvil.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12312-1:2024(Main)
Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs
SIST EN 12312-1:2024

This document specifies the technical requirements to minimize the hazards listed in Clause 4 which can arise during the commissioning, the operation and the maintenance of passenger stairs when used as intended, including misuse reasonably foreseeable by the manufacturer, when carried out in accordance with the specifications given by the manufacturer or his authorized representative. It also takes into account some requirements recognized as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and ground handling agencies.
This document applies to:
a)   self-propelled passenger stairs with seated or standing driver with top speed above 6 km/h (Category A);
b)   towable passenger stairs, with self-propelled function at docking with top speed up to 6 km/h with drive controls from ground, remote control or standing driver position (Category B);
c)   towable stairs, with manual positioning, equipped with powered means, e.g. for height adjustment, stabilizers (Category C);
d)   automatic levelling systems of stairs for embarking/disembarking of passengers.
This document does not apply to stairs to be moved on public roadways.
"Powered" is also understood as manual effort stored in springs or hydraulic accumulators, etc., the dangerous action of which can be produced or can continue after the manual effort has ceased or directly applied manual effort for lifting or lowering loads.
Those clauses of this document that can apply can also be used as a guideline for the design of towable stairs without powered means.
This document does not establish additional requirements for the following:
e)   persons falling out of an aircraft with the passenger stairs not in position;
f)   hazards resulting from a moving stairway (escalator);
g)   aircraft upper deck door access.
No extra requirements on noise and vibration are provided other than those in EN 1915-3:2004+A1:2009 and EN 1915-4:2004+A1:2009.
NOTE   EN 1915-3:2004+A1:2009 and EN 1915-4:2004+A1:2009 provide the general GSE vibration and noise requirements.
This document is not applicable to passenger stairs which are manufactured before the date of its publication.
This part of EN 12312, when used in conjunction with EN 1915-1:2023, EN 1915-2:2001+A1:2009, EN 1915-3:2004+A1:2009 and EN 1915-4:2004+A1:2009, provides the requirements for passenger stairs.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 18044:2024(Main)
Ambient air - Determination of the concentration of levoglucosan - Chromatographic method
kSIST-TS FprCEN/TS 18044:2024

This document specifies a chromatographic method for the determination of levoglucosan in aqueous or organic extracts of filter samples collected in accordance with EN 12341:2023 [5]. The method has been tested for concentrations of ca. 10 ng/m3 up to ca. 3 000 ng/m3 with a sampling duration of 24 h. The procedure is also suitable for the determination of galactosan and mannosan.
Depending on the analysis instrumentation used, the carbohydrates inositol, glycerol, threitol/erythritol, xylitol, arabitol, sorbitol, mannitol, threalose, mannose, glucose, galactose and fructose can also be determined. However, no performance characteristics are given for these compounds in this document.

  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 19392-6:2024(Main)
Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 6: Determination and evaluation of ice adhesion using centrifuge (ISO/TS 19392-6:2023)
kSIST-TS FprCEN ISO/TS 19392-6:2024

This document describes a method to measure ice adhesion from artificial ice on test substrates by using a centrifuge. Basic ice types are defined and test parameters for the ice removal are described to achieve reproducibility of test results for ice adhesion measurements for rotor blade coatings. This document does not intend to provide fixed test parameter to account for the diversity of relevant icing scenarios in this field of application.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17983:2024(Main)
Algae and algae products - Measurement for renewable algal raw material for energy and non-energy applications
SIST EN 17983:2024

This document specifies methods for the measurement of energy content and main elements balances of algae from cultivation or from wild growth and algae products to provide biomass, intended for renewable algal raw material used as bioenergy and in bio-based products.
This document also specifies carbon source parameters specific to algae as bio-based and it is applicable to studies covering algae production life cycle assessment (LCA) e.g. algal biomass farming or wild collection.
This document does not apply to methods of algae and algae products sampling, harvesting and pre/postprocessing.
This document does not apply to algae and algae products intended for the food and feed sector.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7817-1:2024(Main)
Building Information Modelling - Level of Information Need - Part 1 Concepts and principles (ISO 7817-1:2024)
kSIST FprEN ISO 7817:2024

This document specifies concepts and principles to establish a methodology for specifying level of information need and information deliveries in a consistent way when using building information modelling (BIM).
This document specifies the characteristics of different levels used for defining the detail and extent of information required to be exchanged and delivered throughout the life cycle of built assets. It gives guidelines for principles required to specify information needs.
The concepts and principles in this document can be applied for a general information exchange and while in progress, for a generally agreed way of information exchange between parties in a collaborative work process, as well as for an appointment with specified information delivery.
This document is applicable to the whole life cycle of any built asset, including strategic planning, initial design, engineering, development, documentation and construction, day-to-day operation, maintenance, refurbishment, repair and end-of-life.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day