Aerospace series - Elements of electrical and optical connection - Test methods - Part 6415: Optical elements - Test probe damage

This standard specifies a method of checking that the alignment system used for optical connection elements is not damaged by the  insertion of a specified probe.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 6415: Optische Elemente - Beschädigung durch Prüfdorn

Diese Norm legt ein Verfahren zur Überprüfung fest, ob das für optische Verbindungselemente verwendete Ausrichtsystem nicht durch Stecken eines festgelegten Prüfdorns beschädigt wird.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6415 : Organes optiques - Endommagement par sonde d'essai

La présente norme prescrit une méthode pour vérifier que le système d'alignement utilisé pour des éléments de connexion optique n'est pas détérioré par l'insertion d'une sonde d'essai.
Elle doit être utilisée conjointement avec EN 2591-100.

Aerospace series - Elements of electrical and optical connection - Test methods - Part 6415: Optical elements - Test probe damage

General Information

Status
Published
Publication Date
11-Dec-2001
Withdrawal Date
29-Jun-2002
ICS
49.060 - Aerospace electric equipment and systems
Technical Committee
ASD-STAN - Aerospace
Drafting Committee
ASD-STAN/D 2 - Electrical
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
01-Jun-2017
Completion Date
14-Apr-2025
Ref Project
SIST EN 2591-6415:2004 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6415: Optical elements - Test probe damage

Overview

EN 2591-6415:2001 is a CEN (AECMA) aerospace test-method standard that defines how to verify that the alignment system of optical connection elements is not damaged by insertion of a specified test probe. It is intended to be used together with EN 2591-100 (general test method requirements) and cross-references other EN 2591 series methods for probe geometry, insertion loss and visual inspection. The procedure checks mechanical robustness of optical alignment features critical to aerospace optical connectors.

Key topics and requirements

  • Scope: Confirms that probe insertion does not damage the alignment system for optical elements.
  • Specimen preparation: Test specimens (half containing the alignment system) are tested with terminated contacts and standard accessories fitted. Test details such as number of specimens, cable/fibre type and length, maximum allowed insertion loss, and mating/unmating forces must be specified (see EN 2591-415 if applicable).
  • Apparatus references: Uses apparatus and probe definitions per EN 2591-415 and optical loss measurement methods per EN 2591-601.
  • Test procedure:
    • The specified probe is fully inserted into the alignment system while the specimen is held horizontally.
    • A constant bending moment (as defined in the product standard) is applied to the probe.
    • Repeat insertion with probe withdrawn to 2/3 of dimension “A” (per EN 2591-415), then remove probe.
    • Repeat the whole test three times rotating the optical element 90° between each test.
  • Acceptance and measurements: Final assessment includes visual examination (EN 2591-6101) for chipping or distortion of the alignment system and, where applicable, insertion loss checks (EN 2591-601) and mating/unmating force checks (EN 2591-408).

Applications

  • Validates mechanical robustness of aerospace optical connectors and alignment sleeves against accidental or maintenance-related probe insertion.
  • Used during qualification and production testing of optical connection elements in aircraft, satellites and related aerospace systems.
  • Helps ensure optical alignment integrity to maintain low insertion loss and reliable optical performance in harsh aerospace environments.

Who should use this standard

  • Aerospace connector designers and manufacturers
  • Test and quality engineers performing connector qualification
  • Supplier quality assurance and incoming inspection teams
  • Certification bodies and test labs evaluating optical connection elements for aerospace applications

Related standards

  • EN 2591-100 (General test methods)
  • EN 2591-415 (Test probe damage - female contact)
  • EN 2591-601 (Optical elements - Insertion loss)
  • EN 2591-6101 (Optical elements - Visual examination)
  • EN 2591-408 (Mating and unmating forces)

Keywords: EN 2591-6415, test probe damage, optical elements, alignment system, aerospace optical connectors, insertion loss, connector test methods.

Frequently Asked Questions

EN 2591-6415:2001 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Elements of electrical and optical connection - Test methods - Part 6415: Optical elements - Test probe damage". This standard covers: This standard specifies a method of checking that the alignment system used for optical connection elements is not damaged by the insertion of a specified probe. It shall be used together with EN 2591-100.

This standard specifies a method of checking that the alignment system used for optical connection elements is not damaged by the insertion of a specified probe. It shall be used together with EN 2591-100.

EN 2591-6415:2001 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 2591-6415:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 6415: Optical elements - Test probe damageLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 6415: Optische Elemente - Beschädigung durch PrüfdornSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6415 : Organes optiques - Endommagement par sonde d'essaiAerospace series - Elements of electrical and optical connection - Test methods - Part 6415: Optical elements - Test probe damage49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-6415:2001SIST EN 2591-6415:2004en01-maj-2004SIST EN 2591-6415:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-6415December 2001ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 6415: Optical elements - Test probedamageSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 6415: Organesoptiques - Endommagement par sonde d'essaiLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 6415: OptischeElemente - Beschädigung durch PrüfdornThis European Standard was approved by CEN on 5 August 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-6415:2001 ESIST EN 2591-6415:2004
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...