EN 10246-16:2000
(Main)Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections
Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections
This Part of EN 10246 specifies requirements for the ultrasonic testing of the area adjacent to the weld of welded steel tubes for the detection of laminar imperfections. The standard specifies acceptance levels and calibration procedures. Note: This inspection may alternatively, in accordance with EN 10246-15, be carried out on longitudinal edges of strip/plate (using in the manufacture of welded tubes) in the flat form prior to seam welding.
Zerstörungsfreie Prüfung von Stahlrohren - Teil 16: Automatische Ultraschallprüfung des an die Schweißnaht angrenzenden Bereiches geschweißter Stahlrohre zum Nachweis von Dopplungen
Dieser Teil der EN 10246 legt die Anforderungen an die automatische Ultraschallprüfung des an die Schweißnaht angrenzenden Bereiches geschweißter Rohre zum Nachweis von Dopplungen fest. Die Norm enthält Festlegungen über Zulässigkeitsklassen und die Einstellung der Prüfanlagen.
Essais non destructifs sur des tubes en acier - Partie 16: Contrôle automatique par ultrasons pour la détection des dédoublures dans la zone soudée des tubes en acier soudés
La présente partie de l'EN 10246 spécifie les prescriptions relatives au contrôle par ultrasons des zones adjacentes au cordon de soudure pour la détection des dédoublures. Note: Ce contrôle peut également être effectué sur les rives longitudinales de la bande/plaque (utilisées pour la fabrication de tubes soudés) sous forme plate, avant le soudage, conformément à l'EN 10246-15.
Neporušitveno preskušanje jeklenih cevi - 16. del: Ugotavljanje laminarnih napak ob varu jeklenih cevi z avtomatsko ultrazvočno preiskavo
General Information
- Status
- Withdrawn
- Publication Date
- 15-Feb-2000
- Withdrawal Date
- 31-Mar-2011
- Technical Committee
- ECISS/TC 110 - Steel tubes, and iron and steel fittings
- Drafting Committee
- ECISS/TC 29/SC 10 - Non-destructive testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Apr-2011
- Completion Date
- 01-Apr-2011
Relations
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN 10246-16:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections". This standard covers: This Part of EN 10246 specifies requirements for the ultrasonic testing of the area adjacent to the weld of welded steel tubes for the detection of laminar imperfections. The standard specifies acceptance levels and calibration procedures. Note: This inspection may alternatively, in accordance with EN 10246-15, be carried out on longitudinal edges of strip/plate (using in the manufacture of welded tubes) in the flat form prior to seam welding.
This Part of EN 10246 specifies requirements for the ultrasonic testing of the area adjacent to the weld of welded steel tubes for the detection of laminar imperfections. The standard specifies acceptance levels and calibration procedures. Note: This inspection may alternatively, in accordance with EN 10246-15, be carried out on longitudinal edges of strip/plate (using in the manufacture of welded tubes) in the flat form prior to seam welding.
EN 10246-16:2000 is classified under the following ICS (International Classification for Standards) categories: 23.040.10 - Iron and steel pipes; 25.160.40 - Welded joints and welds; 77.040.20 - Non-destructive testing of metals. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10246-16:2000 has the following relationships with other standards: It is inter standard links to EN ISO 10893-8:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10246-16:2000 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/005, M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 10246-16:2000 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zerstörungsfreie Prüfung von Stahlrohren - Teil 16: Automatische Ultraschallprüfung des an die Schweißnaht angrenzenden Bereiches geschweißter Stahlrohre zum Nachweis von DopplungenEssais non destructifs sur des tubes en acier - Partie 16: Contrôle automatique par ultrasons pour la détection des dédoublures dans la zone soudée des tubes en acier soudésNon-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imper
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...