EN 12100:1997
(Main)Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
This standard specifies a test method for the resistance to bending of a valve installed between supports. This standard is applicable to valves with a polyethylene (PE) body for use with pipes having a nominal outside diameter from greater than 63 mm up to and including 225 mm and intended for the transport of fluids.
Kunststoff-Rohrleitungssysteme - Armaturen aus Polyethylen (PE) - Prüfverfahren für den Widerstand gegen Biegen bei Dreipunktbelastung
Diese Norm legt ein Verfahren zur Prüfung des Widerstandes einer Armatur gegen Biegen bei Lagerung auf zwei Stützen fest. Diese Norm gilt für Armaturen mit einem Polyethylen (PE) Gehäuse, in Verbindung mit Rohren, mit einem Nenn-Außendurchmesser größer als 63 mm bis einschließlich 225 mm, die in Rohrleitungen zum Transport von Fluiden Verwendung finden.
Systèmes de canalisations en plastiques - Robinets en polyéthylène (PE) - Méthode d'essai de résistance à la flexion entre supports
La présente norme européenne spécifie une méthode d'essai relative à la résistance à la flexion entre supports. Cette norme s'applique aux robinets en polyéthylène (PE), utilisés avec des tubes présentant un diamètre extérieur nominal supérieur à 63 mm et inférieur ou égal à 225 mm, destinés au transport des fluides.
Cevni sistemi iz polimernih materialov - Ventili iz polietilena (PE) - Metoda za preskus odpornosti proti upogibanju med podporami
General Information
- Status
- Withdrawn
- Publication Date
- 19-Aug-1997
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Drafting Committee
- CEN/TC 155/WG 32 - Valves
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 19-Mar-2025
- Completion Date
- 21-Jan-2026
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Jan-2023
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 12100:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports". This standard covers: This standard specifies a test method for the resistance to bending of a valve installed between supports. This standard is applicable to valves with a polyethylene (PE) body for use with pipes having a nominal outside diameter from greater than 63 mm up to and including 225 mm and intended for the transport of fluids.
This standard specifies a test method for the resistance to bending of a valve installed between supports. This standard is applicable to valves with a polyethylene (PE) body for use with pipes having a nominal outside diameter from greater than 63 mm up to and including 225 mm and intended for the transport of fluids.
EN 12100:1997 is classified under the following ICS (International Classification for Standards) categories: 23.040.01 - Pipeline components and pipelines in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12100:1997 has the following relationships with other standards: It is inter standard links to EN 12100:2025, EN 837-1:1996. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12100:1997 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12100:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevni sistemi iz polimernih materialov - Ventili iz polietilena (PE) - Metoda za preskus odpornosti proti upogibanju med podporamiKunststoff-Rohrleitungssysteme - Armaturen aus Polyethylen (PE) - Prüfverfahren für den Widerstand gegen Biegen bei DreipunktbelastungSystemes de canalisations en plastiques - Robinets en polyéthylene (PE) - Méthode d'essai de résistance a la flexion e
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...