iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 777-3:1999

(Main)

Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 3: System F, safety

Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 3: System F, safety

This European Standard specifies the requirements and test methods for the construction, safety, classification and marking of non-domestic gas-fired overhead radiant tube heaters incorporated into a multi-burner system (referred to in the body of the text as the "system") with each burner unit under the control of an automatic burner control system.

Gasgeräte-Heizstrahler Dunkelstrahlersysteme mit mehreren Brennern mit Gebläse für gewerbliche und industrielle Anwendung - Teil 3: System F, Sicherheit

Diese Europäische Norm enthält die Anforderungen und Prüfmethoden für Bauausführung, Sicherheit, Klassifizierung und Kennzeichnung für Dunkelstrahler als Bestandteil eines Systems mit mehreren Brennern (im folgenden Text als System bezeichnet), wobei jede einzelne Brennereinheit von einem Gasfeuerungsautomaten überwacht wird.

Tubes radiants suspendus à multi-brûleurs à usage non domestique utilisant les combustibles gazeux - Partie 3: Système F, sécurité

La présente norme européenne définit les exigences et les techniques d'essai relatives à la construction, la sécurité, la classification et le marquage des tubes radiants suspendus utilisant les combustibles gazeux, à usage non domestique, intégrés dans un système à multi-brûleurs (appelé ci-après "système"), chaque brûleur élémentaire étant équipé d'un système automatique de commande et de sécurité.

Stropna cevna sevala z več plinskimi gorilniki za nestanovanjske prostore - 3. del: Sistem F, varnost

General Information

Status
Withdrawn
Publication Date
16-Nov-1999
Withdrawal Date
10-Mar-2009
ICS
97.100.20 - Gas heaters
Technical Committee
CEN/TC 180 - Non-domestic gas-fired overhead radiant heaters
Drafting Committee
CEN/TC 180/WG 1 - Non-domestic gas-fired overhead radiant tube and luminous heaters
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
11-Mar-2009
Completion Date
11-Mar-2009
Directive
2009/142/EC - DIRECTIVE 2009/142/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 30 November 2009 relating to appliances burning gaseous fuels
90/396/EEC - Appliances burning gaseous fuels
Mandate
M/BC/CEN/89/6 - Standardization request to CEN concerning appliances burning gaseous fuels
Ref Project
SIST EN 777-3:2001 - Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 3: System F, safety

Relations

Replaced By
EN 777-3:2009 - Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety
Effective Date
08-Jun-2022
Amended By
EN 777-3:1999/A2:2001 - Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 3: System F, safety
Effective Date
08-Jun-2022
Amended By
EN 777-3:1999/A3:2002 - Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 3: System F, safety
Effective Date
08-Jun-2022
Amended By
EN 777-3:1999/A1:2001 - Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 3: System F, safety
Effective Date
08-Jun-2022
Parent
EN 777-1:1999 - Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D, safety
Effective Date
22-Dec-2008

Buy Standard

EN 777-3:2001EN 777-3:2001
PreviousNext
Standard
EN 777-3:2001
English language
109 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 777-3:2001
01-februar-2001
6WURSQDFHYQDVHYDOD]YHþSOLQVNLPLJRULOQLNL]DQHVWDQRYDQMVNHSURVWRUHGHO
6LVWHP)YDUQRVW
Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part
3: System F, safety
Gasgeräte-Heizstrahler Dunkelstrahlersysteme mit mehreren Brennern mit Gebläse für
gewerbliche und industrielle Anwendung - Teil 3: System F, Sicherheit
Tubes radiants suspendus a multi-bruleurs a usage non domestique utilisant les
combustibles gazeux - Partie 3: Systeme F, sécurité
Ta slovenski standard je istoveten z: EN 777-3:1999
ICS:
97.100.20 Plinski grelniki Gas heaters
SIST EN 777-3:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 777-3:2001

---------------------- Page: 2 ----------------------

SIST EN 777-3:2001

---------------------- Page: 3 ----------------------

SIST EN 777-3:2001

---------------------- Page: 4 ----------------------

SIST EN 777-3:2001

---------------------- Page: 5 ----------------------

SIST EN 777-3:2001

---------------------- Page: 6 ----------------------

SIST EN 777-3:2001

---------------------- Page: 7 ----------------------

SIST EN 777-3:2001

---------------------- Page: 8 ----------------------

SIST EN 777-3:2001

---------------------- Page: 9 ----------------------

SIST EN 777-3:2001

---------------------- Page: 10 ----------------------

SIST EN 777-3:2001

---------------------- Page: 11 ----------------------

SIST EN 777-3:2001

---------------------- Page: 12 ----------------------

SIST EN 777-3:2001

---------------------- Page: 13 ----------------------

SIST EN 777-3:2001

---------------------- Page: 14 ----------------------

SIST EN 777-3:2001

---------------------- Page: 15 ----------------------

SIST EN 777-3:2001

---------------------- Page: 16 ----------------------

SIST EN 777-3:2001

---------------------- Page: 17 ----------------------

SIST EN 777-3:2001

---------------------- Page: 18 ----------------------

SIST EN 777-3:2001

---------------------- Page: 19 ----------------------

SIST EN 777-3:2001

---------------------- Page: 20 ----------------------

SIST EN 777-3:2001

---------------------- Page: 21 ----------------------

SIST EN 777-3:2001

---------------------- Page: 22 ----------------------

SIST EN 777-3:2001

---------------------- Page: 23 ----------------------

SIST EN 777-3:2001

---------------------- Page: 24 ----------------------

SIST EN 777-3:2001

---------------------- Page: 25 ----------------------

SIST EN 777-3:2001

---------------------- Page: 26 ----------------------

SIST EN 777-3:2001

---------------------- Page: 27 ----------------------

SIST EN 777-3:2001

---------------------- Page: 28 ----------------------

SIST EN 777-3:2001

---------------------- Page: 29 ----------------------

SIST EN 777-3:2001

---------------------- Page: 30 ----------------------

SIST EN 777-3:2001

---------------------- Page: 31 ----------------------

SIST EN 777-3:2001

---------------------- Page: 32 ----------------------

SIST EN 777-3:2001

---------------------- Page: 33 ----------------------

SIST EN 777-3:2001

---------------------- Page: 34 ----------------------

SIST EN 777-3:2001

---------------------- Page: 35 ----------------------

SIST EN 777-3:2001

---------------------- Page: 36 ----------------------

SIST EN 777-3:2001

---------------------- Page: 37 ----------------------

SIST EN 777-3:2001

---------------------- Page: 38 ----------------------

SIST EN 777-3:2001

---------------------- Page: 39 ----------------------

SIST EN 777-3:2001

---------------------- Page: 40 ----------------------

SIST EN 777-3:2001

---------------------- Page: 41 ----------------------

SIST EN 777-3:2001

---------------------- Page: 42 ----------------------

SIST EN 777-3:2001

---------------------- Page: 43 ----------------------

SIST EN 777-3:2001

---------------------- Page: 44 ----------------------

SIST EN 777-3:2001

---------------------- Page: 45 ----------------------

SIST EN 777-3:2001

---------------------- Page: 46 ----------------------

SIST EN 777-3:2001

---------------------- Page: 47 ----------------------

SIST EN 777-3:2001

---------------------- Page: 48 ----------------------

SIST EN 777-3:2001

---------------------- Page: 49 ----------------------

SIST EN 777-3:2001

---------------------- Page: 50 ----------------------

SIST EN 777-3:2001

---------------------- Page: 51 ----------------------

SIST EN 777-3:2001

---------------------- Page: 52 ----------------------

SIST EN 777-3:2001

---------------------- Page: 53 ----------------------

SIST EN 77
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 419:2019(Main)
Gas-fired overhead luminous radiant heaters for non-domestic use - Safety and energy efficiency
SIST EN 419:2020

This European Standard specifies the requirements and test methods for the construction, safety, rational use of energy, classification and marking of non-domestic gas-fired overhead luminous radiant heaters for environmental comfort, referred to in the body of the text as "appliances".
This European Standard is applicable to Type A1 and Type A3 appliances only (see 4.2.2) intended for use in other than residential dwellings:
a)   low gas pressure appliances operating at pressures up to and including 50 mbar;
b)   medium gas pressure appliances operating at pressures above 50 mbar and up to 2 bar.
This European Standard is not applicable to:
-   appliances designed for use in domestic dwellings;
-   outdoor appliances;
-   appliances of heat input in excess of 120 kW (based on the net calorific value of the appropriate reference gas);
This standard is applicable to appliances which are intended to be type tested.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    115 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17082:2019(Main)
Domestic and non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
SIST EN 17082:2020

This document specifies the requirements and test methods for the safety and efficiency of gas fired air heaters with or without a fan to assist the transportation of combustion air and/or flue gases, hereafter referred to as "appliances".
This standard also applies to warm air heaters having forced draught burners.
This European Standard applies to Type A2, A3 appliances, with an input not exceeding 300 kW (net CV basis), intended for non-domestic use.
This European Standard also applies to Type B11, B11AS, B11BS, B12, B12AS, B12BS, B13, B13AS, B13BS, B14, B14AS, B14BS, B22, B23, B41, B41AS, B41BS, B42, B42AS, B42BS, B43, B43AS, B43BS, B44, B44AS, B44BS, B52, B53, C11, C12, C13, C21, C31, C32, C33, C41, C62 and C63 appliances with an input not exceeding 300 kW (net CV basis), intended for domestic and non-domestic use.
Provision of the heated air may be by means of ducting.
This European Standard does not apply to:
a)   dual purpose air conditioning appliances (heating and cooling);
b)   appliances where the air is heated by an intermediate fluid;
c)   portable or transportable forced convection appliances;
d)   appliances fitted with manual or automatic means of adjusting the combustion products evacuation by means of flue dampers;
e)   appliances having multiple heating units with a single draught diverter;
f)   appliances fitted with more than one flue outlet;
g)   appliances fitted with gas boosters;
h)   C21 and C41 appliances for 3rd family gases.
NOTE   For C41 appliances, see all requirements and test methods that are valid for C21 appliances, unless otherwise stated.
This European Standard is not intended to cover appliances projected for connection to gas grids where the quality of the distributed gas is likely to vary to a large extent over the lifetime of the appliance.
This European Standard is applicable to appliances which are intended to be type tested.

  • Standard
    193 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    214 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17175:2019(Main)
Gas-fired overhead radiant strip heaters and multi-burner continuous radiant tube heater systems for non-domestic use - Safety and energy efficiency
SIST EN 17175:2020

This document specifies the requirements and test methods for the construction, safety, classification, marking and efficiency of non-domestic gas-fired overhead radiant strips heaters and multi-burner continuous radiant tube heater systems (referred to in the body of the text as the “system”) with each burner unit under the control of an automatic burner control system.
For radiant strip heaters incorporating a single burner, this standard is applicable to Type B22, B23, B52, B53, C12, C13, C32, C33 C52 and C53 appliances intended for use in other than domestic dwellings, in which the supply of combustion air and/or the evacuation of the products of combustion is achieved by mechanical means.
For multi-burner continuous radiant tube heater systems this standard is applicable to type B22, B52, and C52 appliances intended for use in other than domestic dwellings, in which the supply of combustion air and/or the evacuation of the products of combustion is achieved by mechanical means.
This standard also includes appliances incorporating a secondary heat exchanger in the flue system.
This standard is not applicable to:
a)   appliances designed for use in domestic dwelling;
b)   outdoor appliances;
c)   radiant strip heaters where the heat input is in excess of  300 KW (based on the net calorific value of the appropriate reference test gas);
d)   continuous radiant tube heater systems where the heat input of any individual burner unit is in excess of 70 kW (based on the net calorific value of the appropriate reference test gas);
e)   appliances having combustion products evacuation ducts that are non-metallic in the flue system – except ducts downstream of a possible additional condensing exhaust gas heat exchanger.
In addition, for heater systems incorporating multiple tube heaters this standard is not applicable to:
f)        appliances that are designed for continuous condensation within the flue system under normal      operating conditions – except downstream a possible additional exhaust gas heat exchanger.
This standard is applicable to appliances which are intended to be type tested.

  • Standard
    162 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    162 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    164 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 416:2019(Main)
Gas-fired overhead radiant tube heaters and radiant tube heater systems for non-domestic use - Safety and energy efficiency
SIST EN 416:2020

This European Standard specifies the requirements and test methods for the construction, safety, classification, marking and efficiency of non-domestic gas-fired overhead radiant tube heaters incorporating a single burner and multiple burner systems (referred to in the body of the text as the “system”) with each burner unit under the control of an automatic burner control system.
For radiant tube heaters incorporating a single burner, this standard is applicable to Type A2, A3, B12, B13, B22, B23, B42, B43, B52, B53, C12, C13, C32, C33, C52 and C53 appliances intended for use in other than domestic dwellings, in which the supply of combustion air and/or the evacuation of the products of combustion is achieved by mechanical means located upstream of the draught diverter, if provided.
For radiant tube heater systems incorporating multiple tube heater segments, this standard is applicable to Type B52, B52x, B53 and B53x systems intended for use in other than domestic dwellings, in which the supply of combustion air and/or the evacuation of the products of combustion is achieved by mechanical means.
This standard also includes appliances incorporating a secondary heat exchanger in the flue system.
This standard is not applicable to:
a)   appliances designed for use in domestic dwelling;
b)   outdoor appliances;
c)   appliances where the heat input of any individual burner unit is in excess of 120 kW (based on the net calorific value of the appropriate reference test gas);
d)   appliances having combustion products evacuation ducts that are non-metallic in the flue system - except ducts downstream of a possible additional condensing exhaust gas heat exchanger.
In addition, for heater systems incorporating multiple tube heaters this standard is not applicable to:
e)   appliances and systems that are designed for continuous condensation within the flue system under normal operating conditions - except downstream a possible additional exhaust gas heat exchanger.
This standard is applicable to systems which are intended to be type tested.

  • Standard
    167 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    170 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13410:2001/AC:2002(Corrigendum)
Gas-fired overhead radiant heaters - Ventilation requirements for non-domestic premises
SIST EN 13410:2002/AC:2004

TC - Foreword, 3rd paragraph to be slightly amended

  • Corrigendum
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13410:2001(Main)
Gas-fired overhead radiant heaters - Ventilation requirements for non-domestic premises
SIST EN 13410:2002

This European Standard specifies the requirements for the ventilation of non-domestic premises where gas-fired radiant heaters complying with EN 416-1:1999 or EN 419-1:1999 are installed and operated.
This European Standard is applicable to type A appliances (see 3.2).

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16830:2022(Main)
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function
SIST EN 16830:2022

This document specifies the safety, design, construction, performance requirements and testing of Temperature Control Functions (TCF) and Combustion Product Discharge Safety Devices (TTB) for gas and liquid fuel burners and appliances burning one or more gaseous or liquid fuels, hereafter referred to as ‘TCF’ or ‘TTB’.
It also describes the test procedures for checking compliance with these requirements.
This document is applicable to AC and DC supplied TCF and TTB (for TCF and TTB supplied by stand-alone battery system, battery systems for mobile applications or systems which are intended to be connected to DC supply networks, see Annex I).
This document is applicable to electronically based TTB and TCF only.
For both TTB and TCF, the requirements in this document are applicable to the combination of sensing element and control.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 613:2021(Main)
Independent closed-fronted gas-fired type B11, type C11, type C31 and type C91 heaters
SIST EN 613:2022

This document specifies the requirements and test methods for the construction, safety, marking and rational use of energy.
This document is applicable to types B11AS, B11BS, B11CS, C11, C31 and C91 appliances (see 4.2) and those that:
—   are closed-fronted;
—   incorporate a natural draught burner;
—   are connected directly to an open flue or to a device to evacuate the products of combustion (open-flued appliances, balanced-flued appliances);
—   are wall mounted, free-standing or built-in;
—   have a nominal heat input not exceeding 20 kW (based on the net calorific value).
This document is not applicable to:
—   open fronted appliances as specified in EN 13278:2013;
—   decorative fuel effect appliances as specified in EN 509:1999/A1:2003;
—   catalytic combustion appliances;
—   appliances in which the supply of combustion air and/or evacuation of products of combustion is achieved by mechanical means as specified in EN 1266:2002;
—   ducted-air appliances;
—    appliances installed by means of a closure plate (see 3.3.3.3).
Matters related to quality assurance systems, tests during production and to certificates of conformity of auxiliary devices are not dealt with by this standard.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14459:2021(Main)
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment
SIST EN 14459:2022

EN 13611:2019, Clause 1 is replaced by the following:
This document specifies methods for the classification and assessment of function blocks for burners and appliances burning one or more gaseous or liquid fuels with particular regards to their fault behaviour and preventative measures.
This document is applicable to new control function blocks, not covered by dedicated control standards.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 419:2019(Main)
Gas-fired overhead luminous radiant heaters for non-domestic use - Safety and energy efficiency
SIST EN 419:2020

This European Standard specifies the requirements and test methods for the construction, safety, rational use of energy, classification and marking of non-domestic gas-fired overhead luminous radiant heaters for environmental comfort, referred to in the body of the text as "appliances".
This European Standard is applicable to Type A1 and Type A3 appliances only (see 4.2.2) intended for use in other than residential dwellings:
a)   low gas pressure appliances operating at pressures up to and including 50 mbar;
b)   medium gas pressure appliances operating at pressures above 50 mbar and up to 2 bar.
This European Standard is not applicable to:
-   appliances designed for use in domestic dwellings;
-   outdoor appliances;
-   appliances of heat input in excess of 120 kW (based on the net calorific value of the appropriate reference gas);
This standard is applicable to appliances which are intended to be type tested.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    115 pages
    English language
    sale 10% off
    e-Library read for
    1 day