EN 846-8:2000/A1:2006
(Amendment)Methods of test for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers
Methods of test for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers
2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)
Prüfverfahren für Ergänzungsbauteile für Mauerwerk - Teil 8: Bestimmung der Tragfähigkeit und der Last-Verformungseigenschaften von Balkenauflagern
Méthodes d'essai des composants accessoires de maçonnerie - Partie 8: Détermination de la résistance et de la rigidité des étriers supports de poutrelles ou de solives
Metode preskušanja dodatnih komponent zidovine - 8. del: Ugotavljanje nosilnosti in lastnosti sila-pomik obešal za stropnike
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2006
Metode preskušanja dodatnih komponent zidovine - 8. del: Ugotavljanje nosilnosti
in lastnosti sila-pomik obešal za stropnike
Methods of test for ancillary components for masonry - Part 8: Determination of load
capacity and load-deflection characteristics of joist hangers
Prüfverfahren für Ergänzungsbauteile für Mauerwerk - Teil 8: Bestimmung der
Tragfähigkeit und der Last-Verformungseigenschaften von Balkenauflagern
Méthodes d'essai des composants accessoires de maçonnerie - Partie 8: Détermination
de la résistance et de la rigidité des étriers supports de poutrelles ou de solives
Ta slovenski standard je istoveten z: EN 846-8:2000/A1:2006
ICS:
91.080.30 Zidane konstrukcije Masonry
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 846-8:2000/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2006
ICS 91.080.30
English Version
Methods of test for ancillary components for masonry - Part 8:
Determination of load capacity and load-deflection
characteristics of joist hangers
Méthodes d'essai des composants accessoires de Prüfverfahren für Ergänzungsbauteile für Mauerwerk - Teil
maçonnerie - Partie 8: Détermination de la résistance et de 8: Bestimmung der Tragfähigkeit und der Last-
la rigidité des étriers supports de poutrelles ou de solives Verformungseigenschaften von Balkenauflagern
This amendment A1 modifies the European Standard EN 846-8:2000; it was approved by CEN on 12 July 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Esto
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.