iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 560:1994

(Main)

Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes

Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes

This European standard lays down the dimensions and specifies the characteristics of the constituent parts of hose connections for welding, cutting and allied processes, for example for pressure regulators according to prEN 585 and blowpipes.

Gasschweißgeräte - Schlauchanschlüsse für Geräte und Anlagen für Schweißen, Schneiden und verwandte Verfahren

Diese Europäische Norm enthält Maßse und typische Merkmale der einzelnen Bestandteile von Schlauchanschlüssen für Schweißsen, Schneiden und verwandte Verfahren, z.B. für Druckminderer nach prEN 585 und Brenner.

Matériel de soudage aux gaz - Raccords pour tuyaux souples pour appareils de soudage, coupage et techniques connexes

La présente norme européenne fixe les dimensions et spécifie les caractéristiques des matériaux des éléments constituant les raccords pour tuyaux souples pour appareils de soudage, coupage et techniques connexes, par exemple pour les détendeurs conformes au prEN 585 et les chalumeaux.

Naprave za plinsko varjenje - Cevni priključki naprav za varjenje, rezanje in sorodne postopke

General Information

Status
Withdrawn
Publication Date
29-Sep-1994
Withdrawal Date
07-Jun-2005
ICS
23.040.70 - Hoses and hose assemblies
Technical Committee
CEN/TC 121 - Welding
Drafting Committee
CEN/TC 121/SC 7 - Equipment for gas welding, cutting and allied processes
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
08-Jun-2005
Completion Date
08-Jun-2005
Ref Project
SIST EN 560:1997 - Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes

Relations

Replaced By
EN 560:2005 - Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
Effective Date
22-Dec-2008

Buy Standard

EN 560:1997EN 560:1997
PreviousNext
Standard + National Annex and/or Foreword
EN 560:1997
Foreword and/or annex in Slovenian language, body of the standard in English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 560:2018(Main)
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
SIST EN 560:2018

This document lays down the dimensions and specifies the characteristics of the constituent parts of hose connections for welding, cutting and allied processes, for example for pressure regulators according to EN ISO 2503 and blowpipes. The suitability of the hose connections mentioned below will be considered according to the applied pressure range. This document does not cover the design of the hose tail inserted into the hose. This is specified in EN 1256.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14113:2013(Main)
Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
SIST EN ISO 14113:2013

ISO 14113:2013 specifies requirements for rubber and plastics hose and hose assemblies for use with compressed, liquefied, and dissolved gases up to a maximum working pressure of 450 bar (45 MPa), within the ambient temperature range of −20 °C to +60 °C.
It applies to hose assemblies used to connect industrial gas cylinders to manifolds or bundles prior to any pressure reduction stage. It does not cover rubber or thermoplastic hoses for welding, cutting, and allied processes (see ISO 3821 and ISO 12170). It does not apply to refrigerated liquefied gases or to liquefied petroleum gases (LPG).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 561:2002(Main)
Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes
SIST EN 561:2003

This standard defines the specifications and the type tests for quick-action couplings with shut-off valves. It applies to quick-action couplings used between the regulator and the torch in equipment for gas welding, cutting and allied processes.
This standard applies to cases where these couplings are used with hoses according to EN 559 or threaded unions according to EN 560.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    12 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1327:1996(Main)
Gas welding equipment - Thermoplastic hoses for welding and allied processes
SIST EN 1327:1998

This European standard specifies the requirements and relevant methods of measurement and test two types of thermoplastic hoses with maximum design working pressure of 1 MPa and 2 MPa respectively, used for flexible gas supply lines in specific fields of application as follows: - small kits according to EN 1326; - air-aspirated blowpipes for welding and allied processes; - miniature welding such as jewellery work, dentistry work excluding acetylene applications; - arc welding with shielding gas.

  • Standard + National Annex and/or Foreword
    18 pages
    Foreword and/or annex in Slovenian language, body of the standard in German language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN ISO 3821(Main)
Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO/FDIS 3821:2017)
kSIST FprEN ISO 3821:2017
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5774:2023(Main)
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2023)
SIST EN ISO 5774:2023

This document specifies the requirements for four types of flexible thermoplastic hose, textile reinforced, for compressed-air applications in the temperature range from −10 °C to +60 °C.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13483:2022(Main)
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
SIST EN 13483:2022

This document specifies the requirements and test methods for verification for hose assemblies with vapour recovery for delivery systems on petrol filling stations.
Hoses can be constructed from rubber or thermoplastic elastomer (TPE) and this document specifies the requirements for three types of hoses in two grades and two classes of hose assemblies for measured fuel dispensing systems, including oxygenated fuels (≤15 % oxygenated compounds) with internal vapour recovery tubing or hose made out of rubber or thermoplastic elastomer (TPE).
The assemblies are intended for use at ambient temperatures between -30 °C and +55 °C for normal temperature class and -40 °C and +55 °C for low temperature class at a working pressure ≤ 16 bar.
This document is not applicable to multi chamber fuel dispensing hoses.
NOTE As part of the certification of a new dispenser, testing of fuel samples in accordance with EN 228 is carried out at least eight weeks after the first use of the equipment to avoid unrepresentative sulphur content results.
1 bar = 0,1 MPa.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14420-4:2022(Main)
Hose fittings with clamp units - Part 4: Flange connections
SIST EN 14420-4:2022

This document specifies requirements for hose tails according to EN 14420-2, with flanges of mating dimensions PN 10/PN 16/PN 25/PN 40 (according to nominal size and pressure stage) according to EN 1092-1, on hose fittings with clamp units according to EN 14420-3.
Maximum working pressure is 25 bar; maximum working temperature is 65 °C.
Additionally, flanges are also usable according to EN 14422.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14420-2:2022(Main)
Hose fittings with clamp units - Part 2: Hose side parts of hose tail
SIST EN 14420-2:2022

This document specifies requirements for the hose tail of hose fittings according to EN 14420-1 for use with clamp units according to EN 14420-3. Furthermore, it specifies materials for hose fittings with clamp units according to EN 14420-4 to EN 14420-8.
Maximum working pressure is 25 bar ; maximum working temperature is 65 °C.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14420-7:2022(Main)
Hose fittings with clamp units - Part 7: Cam locking couplings
SIST EN 14420-7:2022

This document specifies the design, materials, dimensions and marking requirements for cam locking couplings that serve as the link between hoses and connections to transport liquids, solids and gases, except liquid gas and steam.
For all sizes of aluminium cast material couplings and for all couplings of size DN 100, the pressure range is from -0,8 bar to 10 bar in the working temperature range from -20 °C to +65 °C. All other couplings according to this document are capable of operating within the pressure range from 0,8 bar  to 16 bar in the working temperature range from -20 °C to +65 °C.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day