EN 560:2005

SLOVENSKI STANDARD
01-november-2005
1DGRPHãþD
SIST EN 560:1997
Oprema za plamensko varjenje – Cevne spojke za opremo za varjenje, rezanje in
sorodne postopke
Gas welding equipment - Hose connections for equipment for welding, cutting and allied
processes
Gasschweißgeräte - Schlauchanschlüsse für Geräte und Anlagen für Schweißen,
Schneiden und verwandte Prozesse
Matériel de soudage aux gaz - Raccords pour tuyaux souples pour appareils de
soudage, coupage et techniques connexes
Ta slovenski standard je istoveten z: EN 560:2005
ICS:
25.160.30 Varilna oprema Welding equipment
83.140.40 Gumene cevi Hoses
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 560
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2005
ICS 23.040.70; 25.160.30 Supersedes EN 560:1994
English version
Gas welding equipment - Hose connections for equipment for
welding, cutting and allied processes
Matériel de soudage aux gaz - Raccords pour tuyaux Gasschweißgeräte - Schlauchanschlüsse für Geräte und
souples pour appareils de soudage, coupage et techniques Anlagen für Schweißen, Schneiden und verwandte
connexes Prozesse
This European Standard was approved by CEN on 4 May 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 560:2005: E
worldwide for CEN national Members.

Contents
Page
1 Scope .4
2 Normative references .4
3 General .4
4 Material .4
5 Dimensions.5
Annex A (normative) Special national conditions.8

Figures
Figure 1 — Hose connection. 4
Figure 2 — Threaded union. 5
Figure 3 a — With left-hand thread. 6
Figure 3 b — With right-hand thread. 6
Figure 3 — Union nut. 6
Figure 4 — Hose nipple. 7
Tables
Table 1 — Dimensions of threaded union. 5
Table 2 — Dimensions of union nut . 6
Table 3 — Dimensions of the hose nipple . 7
Table A.1 — Dimensions of threaded unions . 8
Table A.2 — Dimensions of union nut. 8
Table A.3 — Dimensions of the hose nipple. 9

Foreword
This document (EN 560:2005) has been prepared by Technical Committee CEN/TC 121 “Welding”, the secretariat
of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by December 2005, and conflicting national standards shall be withdrawn at the latest
by December 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
1 Scope
This European Standard lays down the dimen
...