iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 560:2005/AC:2007

(Corrigendum)

Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes

Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes

TC - Figure 4 corrected

Gasschweißgeräte - Schlauchanschlüsse für Geräte und Anlagen für Schweißen, Schneiden und verwandte Prozesse

Matériel de soudage aux gaz - Raccords pour tuyaux souples pour appareils de soudage, coupage et techniques connexes

Oprema za plamensko varjenje - Cevne spojke za opremo za varjenje, rezanje in sorodne postopke

General Information

Status
Withdrawn
Publication Date
23-Oct-2007
Withdrawal Date
11-Sep-2018
ICS
23.040.70 - Hoses and hose assemblies
25.160.30 - Welding equipment
Technical Committee
CEN/TC 121 - Welding
Drafting Committee
CEN/TC 121/SC 7 - Equipment for gas welding, cutting and allied processes
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
12-Sep-2018
Ref Project
SIST EN 560:2005/AC:2008 - Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes

Relations

Replaced By
EN 560:2018 - Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
Effective Date
19-Sep-2018
Corrects
EN 560:2005 - Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
Effective Date
08-Jun-2022

Buy Standard

EN 560:2005/AC:2008EN 560:2005/AC:2008
PreviousNext
Corrigendum
EN 560:2005/AC:2008
English, French and German language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema za plamensko varjenje - Cevne spojke za opremo za varjenje, rezanje in sorodne postopkeGasschweißgeräte - Schlauchanschlüsse für Geräte und Anlagen für Schweißen, Schneiden und verwandte ProzesseMatériel de soudage aux gaz - Raccords pour tuyaux souples pour appareils de soudage, coupage et techniques connexesGas welding equipment - Hose connections for equipment for welding, cutting and allied processes83.140.40Gumene ceviHoses25.160.30Varilna opremaWelding equipmentICS:Ta slovenski standard je istoveten z:EN 560:2005/AC:2007SIST EN 560:2005/AC:2008en,fr,de01-januar-2008SIST EN 560:2005/AC:2008SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 560:2005/ACOctober 2007Octobre 2007Oktober 2007ICS 23.040.70; 25.160.30English versionVersion FrançaiseDeutsche FassungGas welding equipment - Hose connections for equipment for welding,cutting and allied processesMatériel de soudage aux gaz - Raccordspour tuyaux souples pour appareils desoudage, coupage et techniques connexesGasschweißgeräte - Schlauchanschlüssefür Geräte und Anlagen für Schweißen,Schneiden und verwandte ProzesseThis corrigendum becomes effective on 24 October 2007 for incorporation in the three officiallangua
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 560:2018(Main)
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
SIST EN 560:2018

This document lays down the dimensions and specifies the characteristics of the constituent parts of hose connections for welding, cutting and allied processes, for example for pressure regulators according to EN ISO 2503 and blowpipes. The suitability of the hose connections mentioned below will be considered according to the applied pressure range. This document does not cover the design of the hose tail inserted into the hose. This is specified in EN 1256.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14113:2013(Main)
Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
SIST EN ISO 14113:2013

ISO 14113:2013 specifies requirements for rubber and plastics hose and hose assemblies for use with compressed, liquefied, and dissolved gases up to a maximum working pressure of 450 bar (45 MPa), within the ambient temperature range of −20 °C to +60 °C.
It applies to hose assemblies used to connect industrial gas cylinders to manifolds or bundles prior to any pressure reduction stage. It does not cover rubber or thermoplastic hoses for welding, cutting, and allied processes (see ISO 3821 and ISO 12170). It does not apply to refrigerated liquefied gases or to liquefied petroleum gases (LPG).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN ISO 3821(Main)
Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO/FDIS 3821:2017)
kSIST FprEN ISO 3821:2017
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 560:2018(Main)
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
SIST EN 560:2018

This document lays down the dimensions and specifies the characteristics of the constituent parts of hose connections for welding, cutting and allied processes, for example for pressure regulators according to EN ISO 2503 and blowpipes. The suitability of the hose connections mentioned below will be considered according to the applied pressure range. This document does not cover the design of the hose tail inserted into the hose. This is specified in EN 1256.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14113:2013(Main)
Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
SIST EN ISO 14113:2013

ISO 14113:2013 specifies requirements for rubber and plastics hose and hose assemblies for use with compressed, liquefied, and dissolved gases up to a maximum working pressure of 450 bar (45 MPa), within the ambient temperature range of −20 °C to +60 °C.
It applies to hose assemblies used to connect industrial gas cylinders to manifolds or bundles prior to any pressure reduction stage. It does not cover rubber or thermoplastic hoses for welding, cutting, and allied processes (see ISO 3821 and ISO 12170). It does not apply to refrigerated liquefied gases or to liquefied petroleum gases (LPG).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN ISO 3821(Main)
Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO/FDIS 3821:2017)
kSIST FprEN ISO 3821:2017
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3379:2024(Main)
Leather - Determination of distension and strength of surface (Ball burst method) (ISO 3379:2024)
SIST EN ISO 3379:2025

This document specifies a test method for the determination of distension and strength of the leather grain or finished surface. This method is applicable to all flexible leathers and it is particularly suitable to determine the lastability of leathers for footwear uppers.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12007-5:2024(Main)
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements
SIST EN 12007-5:2025

This document describes the specific functional requirements for the transportation of gases (gaseous energy carriers) through service lines in addition to the general functional requirements of EN 12007 1 for:
a)   a maximum operating pressure (MOP) up to and including 16 bar;
b)   an operating temperature between −20 °C and +40 °C;
c)   gases and blends of gases which are in the gaseous state when conveyed in the gas pipeline infrastructure such as hydrogen, hydrogen rich, and methane rich gases, dimethyl ether (DME) and propane and butanes used for combustion and/or as feedstock, excluding steam and compressed air, where technical evaluation has ensured that operating conditions, constituents and properties of the gas do not affect the safe operation and maintenance of the service line.
It applies to their design, construction, commissioning, decommissioning, operation, maintenance, extension and other associated works including safety and environmental aspects. The service line is the physical asset comprising of pipework from the gas main branch saddle or top tee to the outlet of the distribution system operator’s nominated point(s) of delivery (for example: isolation valve, regulator, meter connection or combination of regulator and isolation valve).
This document does not apply retrospectively to installations before the publication date unless specifically stated.
Specific functional requirements for:
—   polyethylene pipelines are given in EN 12007 2;
—   steel pipelines are given in EN 12007 3;
—   polyamide (PA-U) pipelines are given in CEN/TS 12007 6;
—   pipework for buildings are given in EN 1775;
—   pressure regulating installations are given in EN 12279 or EN 12186;
—   pressure testing, commissioning and decommissioning are given in EN 12327;
—   safety management system (SMS) and pipeline integrity management system (PIMS) are given in EN 17649.
This document specifies common basic principles for gas infrastructure. Users of this document are expected to be aware that there can exist more detailed national standards and/or codes of practice in the CEN member countries. This document is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles.
In the event of terms of additional requirements in legislation/regulation than in this document, CEN/TR 13737 (all parts) illustrates these terms.
CEN/TR 13737 gives:
—   description of legislations/regulations applicable in a member state;
—   if appropriate, more restrictive national requirements;
—   a national contact point for the latest information.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 18003:2024(Main)
Food authenticity - Determination of 16-O-Methylcafestol content of green and roasted coffee - HPLC-method
SIST EN 18003:2025

This document specifies a high-performance liquid chromatography (HPLC) method for determining the 16-O-Methylcafestol content in green and roasted coffee.
The method is suitable for a content of 40 mg/kg to 1 600 mg/kg of 16-O-Methylcafestol of green and roasted coffee, respectively. The collaborative study has shown that mass fractions also between 20 mg/kg to 40 mg/kg can be successfully analysed depending on the laboratory equipment.
The compliance assessment process is not part of this document.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17972:2024(Main)
Food authenticity - Food authenticity and fraud - Concepts, terms and definitions
SIST EN 17972:2025

This document provides technical definitions of terms relating to authenticity and fraud when referring to food products. All terms and definitions are in the context of food supply chains, but most of them can also be applied when referring to feed products and the feed supply chain.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day