EN 13445-6:2002
(Main)Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
This European Standard specifies requirements for the design, materials, manufacturing and testing of pressure vessels and pressure vessel parts intended for use with a maximum allowable pressure, PS, equal or less 50 bar and shell wall thicknesses not exceeding 60 mm, that are constructed of spheroidal graphite cast iron.
NOTE The grades of spheroidal graphite cast iron allowed are listed in Tables 5.1-1 and 5.1-2. Service conditions are given in clause 4.
Unbefeuerte Druckbehälter - Teil 6: Anforderungen an die Konstruktion und Herstellung von Druckbehältern und Druckbehälterteilen aus Gusseisen mit Kugelgraphit
Diese Europäische Norm legt Anforderungen an die Konstruktion, Werkstoffe, Herstellung und Prüfung von Druckbehältern und Druckbehälterteilen aus Gusseisen mit Kugelgraphit für den Betrieb bei einem maximal zulässigen Druck, PS, gleich oder kleiner 50 bar und einer maximalen Wanddicke von 60 mm fest.
ANMERKUNG Die zulässigen Sorten von Gusseisen mit Kugelgraphit sind in den Tabellen 5.1-1 und 5.1-2 aufgeführt. Die Betriebsbedingungen sind in Abschnitt 4 angegeben.
Récipients sous pression non soumis à la flamme - Partie 6: Exigences pour la conception et la fabrication des récipients sous pression et des parties sous pression moulés en fonte à graphite sphéroïdal
La présente Norme européenne établit les spécifications pour la conception, les matériaux, la fabrication et le contrôle des récipients sous pression et de leurs parties sous pression, prévus pour utilisation à une pression maximale admissible, PS, inférieur ou égale à 50 bar et d'épaisseur de paroi de virole ne dépassent pas 60 mm, fabriqués en fonte à graphite sphéroïdal.
NOTE Les nuances admises de fonte à graphite sphéroïdal sont énumérées dans les Tableaux 5.1-1 et 5.1-2. Les conditions de service sont données à l'article 4.
Neogrevane tlačne posode - 6. del: Zahteve za konstruiranje in proizvodnjo tlačnih posod in tlačnih delov posode iz nodularne litine
General Information
- Status
- Withdrawn
- Publication Date
- 28-May-2002
- Withdrawal Date
- 21-Jul-2009
- Technical Committee
- CEN/TC 54 - Unfired pressure vessels
- Drafting Committee
- CEN/TC 54/WG 55 - E - Inspection and testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 22-Jul-2009
- Completion Date
- 22-Jul-2009
Relations
- Effective Date
- 25-Jul-2009
- Effective Date
- 28-Jan-2026
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
Frequently Asked Questions
EN 13445-6:2002 is a standard published by the European Committee for Standardization (CEN). Its full title is "Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron". This standard covers: This European Standard specifies requirements for the design, materials, manufacturing and testing of pressure vessels and pressure vessel parts intended for use with a maximum allowable pressure, PS, equal or less 50 bar and shell wall thicknesses not exceeding 60 mm, that are constructed of spheroidal graphite cast iron. NOTE The grades of spheroidal graphite cast iron allowed are listed in Tables 5.1-1 and 5.1-2. Service conditions are given in clause 4.
This European Standard specifies requirements for the design, materials, manufacturing and testing of pressure vessels and pressure vessel parts intended for use with a maximum allowable pressure, PS, equal or less 50 bar and shell wall thicknesses not exceeding 60 mm, that are constructed of spheroidal graphite cast iron. NOTE The grades of spheroidal graphite cast iron allowed are listed in Tables 5.1-1 and 5.1-2. Service conditions are given in clause 4.
EN 13445-6:2002 is classified under the following ICS (International Classification for Standards) categories: 23.020.30 - Pressure vessels, gas cylinders. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13445-6:2002 has the following relationships with other standards: It is inter standard links to EN 13445-6:2009, EN 378-2:2008+A2:2012, EN 13445-6:2002/A2:2006, EN 13445-6:2002/A3:2008, EN 13445-6:2002/A1:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13445-6:2002 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13445-6:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2002
1HRJUHYDQHWODþQHSRVRGHGHO =DKWHYH]DNRQVWUXLUDQMHLQSURL]YRGQMRWODþQLK
SRVRGLQWODþQLKGHORYSRVRGHL]QRGXODUQHOLWLQH
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of
pressure vessels and pressure parts constructed from spheroidal graphite cast iron
Unbefeuerte Druckbehälter - Teil 6: Anforderungen an die Konstruktion und Herstellung
von Druckbehältern und Druckbehälterteilen aus Gusseisen mit Kugelgraphit
Récip
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...