EN 353-1:1992
(Main)Personal protective equipment against falls from a height - Guided type fall arresters on a rigid anchorage line
Personal protective equipment against falls from a height - Guided type fall arresters on a rigid anchorage line
This standard specifies the requirements, test methods, instructions for use and marking for guided type fall arresters on a rigid anchorage line usually attached to or integrated in climbing ladders or climbing iron tracks adequately adjusted to suitable structures. Guided type fall arresters according to this standard are used in fall arrest systems specified in EN 363 in conjunction with full body harnesses specified in EN 361. Other types of fall arresters are specified in EN 360 and in EN 353-2. Energy absorbers are specified in EN 355.
Persönliche Schutzausrüstung gegen Absturz - Steigschutzeinrichtungen mit fester Führung
Diese Norm legt Anforderungen, Prüfverfahren, Gebrauchsanleitung und Kennzeichnung für Steigschutzeinrichtungen mit festen Führungen fest, die gewöhnlich an Steigleitern oder Steigeisengängen angebracht oder in diese integriert sind, wobei diese in adäquater Weise an geeigneten Konstruktionen befestigt sind. Steigschutzeinrichtungen nach dieser Norm werden in Auffangsystemen entsprechend EN 363 in Verbindung mit Auffanggurten entsprechend EN 361 verwendet. Andere Arten von Auffanggeräten sind in EN 360 und in EN 353-2 spezifiziert. Falldämpfer sind in EN 355 spezifiziert.
Equipement de protection individuelle contre les chutes de hauteur - Antichutes mobiles sur support d'assurage rigide
La présente norme fixe les exigences, les méthodes d'essai, le mode d'emploi et le marquage des antichutes mobiles sur support d'assurage rigide généralement fixé ou intégré à des échelles ou à des systèmes d'ascension adéquatement fixés sur des structures appropriées. Les antichutes mobiles conformes à la présente norme sont utilisés dans des systèmes d'arrêt des chutes spécifiés dans l'EN 363 conjointement aux harnais d'antichutes spécifiés dans l'EN 361. D'autres types d'antichutes sont spécifiés dans l'EN 360 et dans l'EN 353-2. Les absorbeurs d'énergie sont spécifiés dans l'EN 355.
Osebna varovalna oprema za zaščito pred padci z višine - Varovalne naprave na togo sidranih vodilih
General Information
- Status
- Withdrawn
- Publication Date
- 06-Dec-1992
- Withdrawal Date
- 21-May-2002
- Technical Committee
- CEN/TC 160 - Protection against falls from height including working belts
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 22-May-2002
- Completion Date
- 22-May-2002
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
NSF International
Global independent organization facilitating standards development and certification.
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.
Kiwa BDA Testing
Building and construction product certification.
Sponsored listings
Frequently Asked Questions
EN 353-1:1992 is a standard published by the European Committee for Standardization (CEN). Its full title is "Personal protective equipment against falls from a height - Guided type fall arresters on a rigid anchorage line". This standard covers: This standard specifies the requirements, test methods, instructions for use and marking for guided type fall arresters on a rigid anchorage line usually attached to or integrated in climbing ladders or climbing iron tracks adequately adjusted to suitable structures. Guided type fall arresters according to this standard are used in fall arrest systems specified in EN 363 in conjunction with full body harnesses specified in EN 361. Other types of fall arresters are specified in EN 360 and in EN 353-2. Energy absorbers are specified in EN 355.
This standard specifies the requirements, test methods, instructions for use and marking for guided type fall arresters on a rigid anchorage line usually attached to or integrated in climbing ladders or climbing iron tracks adequately adjusted to suitable structures. Guided type fall arresters according to this standard are used in fall arrest systems specified in EN 363 in conjunction with full body harnesses specified in EN 361. Other types of fall arresters are specified in EN 360 and in EN 353-2. Energy absorbers are specified in EN 355.
EN 353-1:1992 is classified under the following ICS (International Classification for Standards) categories: 13.340.99 - Other protective equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 353-1:1992 has the following relationships with other standards: It is inter standard links to EN 353-1:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 353-1:1992 is associated with the following European legislation: EU Directives/Regulations: 89/686/EEC; Standardization Mandates: M/BC/CEN/88/11. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 353-1:1992 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Persönliche Schutzausrüstung gegen Absturz - Steigschutzeinrichtungen mit fester FührungEquipement de protection individuelle contre les chutes de hauteur - Antichutes mobiles sur support d'assurage rigidePersonal protective equipment against falls from a height - Guided type fa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...