iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 353-1:1996

(Main)

Personal protective equipment against falls from a height - Guided type fall arresters on a rigid anchorage line

Personal protective equipment against falls from a height - Guided type fall arresters on a rigid anchorage line

This standard specifies the requirements, test methods, instructions for use and marking for guided type fall arresters on a rigid anchorage line usually attached to or integrated in climbing ladders or climbing iron tracks adequately adjusted to suitable structures. Guided type fall arresters according to this standard are used in fall arrest systems specified in EN 363 in conjunction with full body harnesses specified in EN 361. Other types of fall arresters are specified in EN 360 and in EN 353-2. Energy absorbers are specified in EN 355.

Persönliche Schutzausrüstung gegen Absturz - Steigschutzeinrichtungen mit fester Führung

Diese Norm legt Anforderungen, Prüfverfahren, Gebrauchsanleitung und Kennzeichnung für Steigschutzeinrichtungen mit festen Führungen fest, die gewöhnlich an Steigleitern oder Steigeisengängen angebracht oder in diese integriert sind, wobei diese in adäquater Weise an geeigneten Konstruktionen befestigt sind. Steigschutzeinrichtungen nach dieser Norm werden in Auffangsystemen entsprechend EN 363 in Verbindung mit Auffanggurten entsprechend EN 361 verwendet. Andere Arten von Auffanggeräten sind in EN 360 und in EN 353-2 spezifiziert. Falldämpfer sind in EN 355 spezifiziert.

Equipement de protection individuelle contre les chutes de hauteur - Antichutes mobiles sur support d'assurage rigide

La présente norme fixe les exigences, les méthodes d'essai, le mode d'emploi et le marquage des antichutes mobiles sur support d'assurage rigide généralement fixé ou intégré a des échelles ou a des systemes d'ascension adéquatement fixés sur des structures appropriées. Les antichutes mobiles conformes a la présente norme sont utilisés dans des systemes d'arret des chutes spécifiés dans l'EN 363 conjointement aux harnais d'antichutes spécifiés dans l'EN 361. D'autres types d'antichutes sont spécifiés dans l'EN 360 et dans l'EN 353-2. Les absorbeurs d'énergie sont spécifiés dans l'EN 355.

Osebna varovalna oprema za zaščito pred padci z višine - Varovalne naprave na togo sidranih vodilih

General Information

Status
Withdrawn
Publication Date
31-Jan-1996
Withdrawal Date
31-Oct-2002
ICS
13.340.60 - Protection against falling and slipping
Technical Committee
OVP - Personal protecting equipment
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Nov-2002
Due Date
01-Nov-2002
Completion Date
01-Nov-2002
Directive
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
Mandate
M/BC/CEN/88/11 - Order for standardization concerning Personal Protective Equipment (P.P.E.) - protection against falls from height
Ref Project
EN 353-1:1992 - Personal protective equipment against falls from a height - Guided type fall arresters on a rigid anchorage line

Relations

Replaced By
SIST EN 353-1:2002 - Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchor line
Effective Date
01-Nov-2002

Buy Standard

EN 353-1:1996EN 353-1:1996
PreviousNext
Standard
EN 353-1:1996
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Persönliche Schutzausrüstung gegen Absturz - Steigschutzeinrichtungen mit fester FührungEquipement de protection individuelle contre les chutes de hauteur - Antichutes mobiles sur support d'assurage rigidePersonal protective equipment against falls from a height - Guided type fa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 363:2019(Main)
Personal fall protection equipment - Personal fall protection systems
EN 363:2018

This European Standard specifies the general characteristics and assembly of personal fall protection systems. It gives examples for the specific types of personal fall protection systems and describes how components may be assembled into systems.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 358:2019(Main)
Personal protective equipment for work positioning and prevention of falls from a height - Belts and lanyards for work positioning or restraint
EN 358:2018

This European Standard applies to belts and lanyards intended for the purpose of work positioning or restraint. It specifies the requirements, testing, marking and information supplied by the manufacturer.
This European Standard does not cover restraint lanyards with a fixed length which are not integrated into a belt.
NOTE   Restraint lanyards with a fixed length which are not integrated into a belt are covered in EN 354.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 353-1:2014+A1:2018(Main)
Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line
EN 353-1:2014+A1:2017

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for guided type fall arresters including a rigid anchor line. This anchor line is usually attached to or integrated in ladders or rungs adequately fixed to suitable structures. Guided type fall arresters including a rigid anchor line conforming to this European Standard are components of one of the fall arrest systems covered by EN 363.
This European Standard applies to rigid anchor lines which are intended to be installed vertically and/or with a combination of forward-leaning angle and/or sideways leaning angle between the true vertical and the vertical +15° (see Figure 2).
Multi-user applications, i.e. rigid anchor lines that allow more than one user to be attached at any one time, are not addressed in this document.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1496:2017(Main)
Personal fall protection equipment - Rescue lifting devices
EN 1496:2017

This draft European Standard specifies requirements, test methods, marking and information supplied by the manufacturer for rescue lifting devices. Rescue lifting devices conforming to this draft European Standard are used as components of rescue systems.
Rescue lifting devices in accordance with this draft European Standard may be combined with other components, e.g. descender devices for rescue (EN 341) or retractable type fall arresters (EN 360).

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 16415:2013(Main)
Personal fall protection equipment - Anchor devices - Recommendations for anchor devices for use by more than one person simultaneously
CEN/TS 16415:2013

This Technical Specification sets out recommendations for requirements, test apparatus, test methods, marking and information supplied by the manufacturer for anchor devices intended for use by more than one user simultaneously. This Technical Specification is not applicable to:
- anchor devices intended to allow only one user to be attached at any one time, which are covered by EN 795:2012;
- anchor devices used in any sports or recreational activity;
- equipment designed to conform to EN 516 or EN 517;
- elements or parts of structures which were installed for use other than as anchor points or anchor devices, e.g. beams, girders;
- structural anchors.
NOTE Requirements, test methods, marking and information supplied by the manufacturer for anchor devices intended for use by a single user are covered by European Standard EN 795:2012.

  • Technical specification
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 795:2012(Main)
Personal fall protection equipment - Anchor devices
EN 795:2012

This European Standard specifies requirements for performance and associated test methods for single-user and multi-user anchor devices which can be removed from the structure. These anchor devices incorporate single or multiple, stationary or travelling anchor points designed for the attachment of components forming part of a personal fall protection system in accordance with EN 363. This European standard also gives requirements for marking and instructions for use, and guidance on installation.  This European Standard is not applicable to:
- anchor devices used in any sports or recreational activity;
- equipment designed to conform to EN 516 or EN 517;
- elements or parts of structures which were installed for use other than as anchor points or anchor devices, e.g. beams, girders;
- structural anchors.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 341:2011
Personal fall protection equipment - Descender devices for rescue
EN 341:2011

This European Standard specifies requirements, test methods, marking and information to be supplied by the manufacturer for descender devices, including descent lines intended solely for rescue, to be used in conjunction with other equipment, e. g. full body harnesses (EN 361), rescue harnesses (EN 1497). This European Standard does not specify requirements for descender devices that are used for purposes other than rescue, e.g. mountaineering, rope access and work positioning systems. Descender devices may be designed for the use of one or two persons simultaneously.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 354:2010
Personal protective equipment against falls from a height - Lanyards
EN 354:2010

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for lanyards. Lanyards conforming to this European Standard are used as connecting elements or components in personal fall protection systems (i.e. restraint systems, work positioning systems, rope access systems, fall arrest systems and rescue systems).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12401:2009(Main)
Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009)
EN ISO 12401:2009

This International Standard specifies the requirements for performance, sizing, marking and test methods for deck safety harnesses and safety lines. It is applicable to harnesses and lines in the following sizes of body mass a) size 1 > 50 kg1) b) size 2 > 20 kg > 50 kg1) c) size 3 > 20 kg1) which are intended to be worn by all persons when in the exposed cockpit or on the working deck of a vessel afloat. It is not applicable to dinghy "trapeze" harnesses, windsurfing harnesses, seat harnesses for fast motor boats and harnesses intended to protect against fall from a height.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10862:2009(Main)
Small craft - Quick release system for trapeze harness (ISO 10862:2009)
EN ISO 10862:2009

This International Standard specifies requirements and test methods for quick release devices as a component of the small sailing-craft trapeze system worn whilst afloat. The quick release device is intended to quickly release the wearer from entrapment and minimize the risk of drowning in the event of a failure to release from the sailing-craft trapeze system by other means. The quick release device is intended to be easily accessible and operated in all conditions that might occur whilst in use, including when a craft is capsized or inverted.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day