EN 14214:2012

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kraftstoffe für Kraftfahrzeuge - Fettsäure-Methylester (FAME) für Dieselmotoren - Anforderungen und PrüfverfahrenCarburants pour automobiles - Esters méthyliques d'acides gras (EMAG) pour moteurs diesel - Exigences et méthodes d'essaisAutomotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods75.160.20Liquid fuelsICS:Ta slovenski standard je istoveten z:EN 14214:2012SIST EN 14214:2012en01-oktober-2012SIST EN 14214:2012SLOVENSKI
STANDARDSIST EN 14214:2009+A1:2010SIST EN 14213:2003/AC:2004SIST EN 14213:20031DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14214
August 2012 ICS 75.160.20 Supersedes EN 14213:2003, EN 14214:2008+A1:2009English Version
Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
Produits pétroliers liquides - Esters méthyliques d'acides gras (EMAG) pour moteurs diesel et comme combustible de chauffage - Exigences et méthodes d'essai
Flüssige Mineralölerzeugnisse - Fettsäure-Methylester (FAME) zur Verwendung in Dieselmotoren und als Heizöl - Anforderungen und Prüfverfahren This European Standard was approved by CEN on 20 July 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14214:2012: ESIST EN 14214:2012

2 Contents Page Foreword . 3Introduction . 51Scope . 62Normative references . 63 Sampling . 84Pump marking . 85Requirements and test methods . 85.1Dyes and markers . 85.2Additives . 85.2.1General . 85.2.2Oxidation stability enhancing additives . 85.2.3Non-FAME components . 95.3Generally applicable requirements and related test methods . 95.4Climate dependent requirements and related test methods . 115.4.1General . 115.4.2FAME being used at 100 % as fuel for diesel engines and heating applications . 115.4.3FAME being used as blend component in diesel fuel . 125.5Precision and dispute . 13Annex A (normative)
Details of interlaboratory test programme . 14Annex B (normative)
Correction factor for calculation of density of FAME . 15Annex C (informative)
Background information for national climate grades selection . 16Bibliography . 19 SIST EN 14214:2012

3 Foreword This document (EN 14214:2012) has been prepared by Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2013, and conflicting national standards shall be withdrawn at the latest by February 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14214:2008+A1:2009, EN 14213:2003 and EN 14213:2003/AC:2003. This document has originally been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). This document exists in parallel with EN 590. Significant technical changes between this European Standard and the previous edition are:  extension towards distillate heating fuels. The former specification for FAME for heating fuel applications (EN 14213) also needed to be aligned, but effectively only one quality was supplied and required by heating fuel suppliers in the European market.  an update of the specification in the perspective of blending at up to 10 % (V/V) of FAME in automotive diesel fuel;  discrimination between climate requirements for use for 100 % as fuel for diesel engines and for use as blend component in diesel fuel. This is done by introducing a new Table 3 for seasonal grades to be set nationally. It thus requires countries to present two sets of seasonal choices in a national annex to this standard;  introduction of additional requirements for FAME for use as a blending component as a first, intermediate, step towards solving precipitation problems observed in the market during cold periods. Further work towards limitation of impurities, more specifically steryl-glycosides, and regarding monoglyceride determination is on-going. A performance test, such as a filterability test, is anticipated to solve this issue in the longer term;  a decrease of the monoglycerides content limit from 0,8 % (m/m) to 0,7 % (m/m);  deletion of the requirement on carbon residue as it is no longer considered necessary;  an increase of the oxidation stability requirement from 6 h minimum to 8 h minimum;  introduction of additionally developed test methods for iodine value, phosphorus content and sulfur content, EN 16300, FprEN 16294 and EN ISO 13032, respectively. Plus updating towards revised sulfur and sulfated ash content determination test methods;  updating of test methods on esters, (mono) glycerides, polyunsaturated fatty acids and stability characteristics of FAME, resulting from work under CEN/TC 19 and in cooperation with CEN/TC 307, either as final publication or as technically assessed and accepted draft texts; SIST EN 14214:2012

4  combination of all sub-clauses dealing with additives in one and aligning them with similar requirements in EN 590.  a re-evaluation of Table A.1 has been executed and indicated that FAME conforms to the current precision statements of EN 116 and therefore these row has been deleted from Table A.1. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
5 Introduction This European Standard gives all relevant characteristics, requirements and test methods for fatty acid methyl esters (FAME), which are known at this time to be necessary to define the product to be used as automotive diesel fuel and in heating applications. Many of the test methods included in this European Standard have been the subject of several interlaboratory testing to determine their applicability and their precision in relation to different sources of FAME. These FAMEs were produced from vegetable oils available in the market at the time, mainly rapeseed, palm, soy and sunflower oil. This does not imply any restrictions towards the feedstock for the fats and oils from which the FAME is made to comply with this European Standard (see Foreword). Concerning total contamination, an interlaboratory study with field samples, following a study with artificial samples, is pending and therefore the repeatability and reproducibility of EN 12662 have not yet been fully established. The precision for FAME is investigated. Concerning cold temperature properties of diesel blends related to the quality of the FAME used as a blending component, strong indications towards the relationship with saturated mono-glycerides and steryl-glycosides have become known. As no test method to detect those components separately has yet been developed, an interim solution in setting CFPP and cloud point limitations has been included in this standard (see Table 3). A study within CEN has indicated that FAME conforms to the current precision statements of EN 116 and EN 23015. Although there are technical indications that iodine value can be removed as an indication for FAME stability, relaxation at this time would be premature. Until the stability safeguards introduced by this revision have been proven in the market, it is maintained, also preventing unnecessarily high usage of anti-oxidant additives. In order to meet the needs of the latest technology engines, lowering of the phosphorus limit and the limit of sodium and potassium is under investigation. SIST EN 14214:2012

6 1 Scope This European Standard specifies requirements and test methods for marketed and delivered fatty acid methyl esters (hereafter known as FAME) to be used either as fuel for diesel engines and for heating applications at 100 % concentration, or as an extender for distillate fuel for diesel engines in accordance with the requirements of EN 590 and for heating fuel. At 100 % concentration it is applicable to fuel for use in diesel engines and in heating applications designed or subsequently adapted to run on 100 % FAME. NOTE For the purposes of this European Standard, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction, µ, and the volume fraction, 3. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 116:1997, Diesel and domestic heating fuels — Determination of cold filter plugging point EN 590, Automotive fuels — Diesel — Requirements and test methods EN 12662:2008, Liquid petroleum products — Determination of contamination in middle distillates EN 14103:2011, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of ester and linolenic acid methyl ester contents EN 14104:2003, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of acid value EN 14105:2011, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of free and total glycerol and mono-, di-, triglyceride contents EN 14106:2003, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of free glycerol content EN 14107:2003, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry EN 14108:2003, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of sodium content by atomic absorption spectrometry EN 14109:2003, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of potassium content by atomic absorption spectrometry EN 14110:2003, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of methanol content EN 14111:2003, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of iodine value EN 14112:2003, Fat and oil derivatives — Fatty Acid Methyl Esters (FAME) — Determination of oxidation stability (accelerated oxidation test) EN 14538:2006, Fat and oil derivatives — Fatty acid methyl esters (FAME) — Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES) EN 15751:2009, Automotive fuels — Fatty acid methyl ester (FAME) fuel and blends with diesel fuel — Determination of oxidation stability by accelerated oxi
...