EN 287-2:1992

EN 287-2:1992 is a standard + national annex and/or foreword published by the European Committee for Standardization (CEN). Its full title is "Approval testing of welders - Fusion welding - Part 2: Aluminium and aluminium alloys". This standard covers: This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of aluminium. The recommended format for the certificate of approval testing is given in Annex A. During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex C. This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations. This standard applies to the approval testing of welders for the fusion welding of aluminium using gas in shield. The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. This standard does not cover fully mechanized and fully automatic processes (.).1) This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4. The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.1) 1. Modified by Amendment A1 :1997

This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of aluminium. The recommended format for the certificate of approval testing is given in Annex A. During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex C. This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations. This standard applies to the approval testing of welders for the fusion welding of aluminium using gas in shield. The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanized welding. This standard does not cover fully mechanized and fully automatic processes (.).1) This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4. The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.1) 1. Modified by Amendment A1 :1997

EN 287-2:1992 is classified under the following ICS (International Classification for Standards) categories: 25.160.10 - Welding processes. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 287-2:1992 has the following relationships with other standards: It is inter standard links to EN ISO 9606-2:2004, EN ISO 9606-3:1999, EN 13530-2:2002, EN ISO 21049:2004, EN 287-2:1992/A1:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 287-2:1992 is associated with the following European legislation: EU Directives/Regulations: 87/404/EEC, 97/23/EC; Standardization Mandates: M/071, M/BC/CEN/89/2. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 287-2:1992 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.