Medical gas pipeline systems - Part 1: Terminal units for compressed medical gases and vacuum

1.1 This Part of this European Standard specifies requirements for terminal units intended for use in medical gas pipeline systems specified in prEN 737-3 for use with the following medical gases:   - oxygen;   - nitrous oxide;   - air for breathing;   - carbon dioxide;   - oxygen/nitrous oxide mixture (50/50 % (V/V))   - air for driving surgical tools;   - nitrogen for driving surgical tools   - vacuum.  It is intended especially to ensure the gas-specific assembly of terminal units and to prevent their interchange between different gases.  1.2 This Part of this European Standard also specifies requirements for:   - terminal units for the supply and disposal of air for driving surgical tools;   - probes intended to be connected to the gas-specific connection point which is part of a terminal unit;  1.3 This Part of this European Standard does not specify:   - the dimensions of probes and of the gas-specific connection points of the terminal unit (see prEN 737-6);   - the dimensions of NIST connectors (see EN 739);   - requirements for terminal units for anaesthetic gas scavenging systems (see   EN 737-4)

Rohrleitungssysteme für medizinische Gase - Teil 1: Entnahmestellen für medizinische Druckgase und Vakuum

Dieser Teil dieser Europäischen Norm legt die Anforderungen an Entnahmestellen fest, die in Rohrleitungssystemen für medizinische Gase nach prEN 737-3 zur Verwendung mit den folgenden medizinischen Gasen vorgesehen sind: Sauerstoff, Lachgas, Luft für Beatmungszwecke, Kohlendioxid, Sauerstoff-/Lachgasgemische (50/50 %(V/V)), Luft zum Betreiben chirurgischer Werkzeuge, Stickstoff zum Betreiben chirurgischer Werkzeuge, Vakuum.

Systèmes de distribution de gaz médicaux - Partie 1: Prises murales pour gaz médicaux comprimés et pour le vide (aspiration)

La présente partie de cette norme européenne spécifie les prescriptions relatives aux prises murales destinées à être utilisées dans les système de distribution de gaz médicaux spécifiés dans le prEN 737-3 conçus pour être utilisés avec les gaz suivants: oxygène, protoxyde d'azote, air respirable, dioxyde de carbone, mélange oxygène/protoxyde d'azote (50/50 %(V/V), air pour les instruments chirurgicaux, azote pour les instruments chirurgicaux, vide (aspiration).

Sistemi napeljav za medicinske pline - 1. del: Končni deli za stisnjene medicinske pline in podtlak

General Information

Status
Withdrawn
Publication Date
20-Jan-1998
Withdrawal Date
30-Jun-2008
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Jul-2008
Completion Date
01-Jul-2008

Relations

Buy Standard

Standard
EN 737-1:2000
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 737-1:2000
01-januar-2000
6LVWHPLQDSHOMDY]DPHGLFLQVNHSOLQHGHO.RQþQLGHOL]DVWLVQMHQHPHGLFLQVNH
SOLQHLQSRGWODN
Medical gas pipeline systems - Part 1: Terminal units for compressed medical gases and
vacuum
Rohrleitungssysteme für medizinische Gase - Teil 1: Entnahmestellen für medizinische
Druckgase und Vakuum
Systemes de distribution de gaz médicaux - Partie 1: Prises murales pour gaz médicaux
comprimés et pour le vide (aspiration)
Ta slovenski standard je istoveten z: EN 737-1:1998
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
SIST EN 737-1:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 737-1:2000

---------------------- Page: 2 ----------------------

SIST EN 737-1:2000

---------------------- Page: 3 ----------------------

SIST EN 737-1:2000

---------------------- Page: 4 ----------------------

SIST EN 737-1:2000

---------------------- Page: 5 ----------------------

SIST EN 737-1:2000

---------------------- Page: 6 ----------------------

SIST EN 737-1:2000

---------------------- Page: 7 ----------------------

SIST EN 737-1:2000

---------------------- Page: 8 ----------------------

SIST EN 737-1:2000

---------------------- Page: 9 ----------------------

SIST EN 737-1:2000

---------------------- Page: 10 ----------------------

SIST EN 737-1:2000

---------------------- Page: 11 --------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.