prEN ISO 19014-5
(Main)Earth-moving machinery - Functional safety - Part 5: Tables of performance levels (ISO/DIS 19014-5:2025)
Earth-moving machinery - Functional safety - Part 5: Tables of performance levels (ISO/DIS 19014-5:2025)
This document provides normative tables of machine performance levels required (MPLr) by common function and type for earth-moving machinery (EMM) as defined in ISO 6165. These MPLr can then be mapped or applied to safety control systems (SCS) used to control or that affect the functions defined in the table.
The MPLr in this document are determined through the machine control system safety analysis (MCSSA) process outlined in ISO 19014-1. A brief explanation of how the levels were derived and the associated assumptions are contained herein.
This document is not applicable to EMM manufactured before the date of its publication.
Erdbaumaschinen - Funktionale Sicherheit - Teil 5: Tabellen mit Performance Leveln (ISO/DIS 19014-5.2:2025)
Dieses Dokument enthält normative Tabellen mit erforderlichen Performance Leveln der Maschine (MPLr, en: machine performance level required) nach üblicher Funktion und Typ der Erdbaumaschine (EMM, en: earth-moving machinery) entsprechend ISO 6165:2022. Dieses MPLr kann dann Sicherheitssteuerungen (SCS, en: safety control system), die die in der Tabelle aufgeführten Funktionen steuern oder beeinflussen, zugeordnet oder darauf angewendet werden.
Die MPLr in diesem Dokument werden mithilfe der in ISO 19014 1:20XX beschriebenen Sicherheitsanalyse der Maschinensteuerung (MCSSA, en: machine control system safety analysis) bestimmt. Hierin sind eine kurze Erläuterung zur Ableitung der Level und die entsprechenden Annahmen enthalten.
Dieses Dokument ist nicht anwendbar für EMM, die vor dem Veröffentlichungsdatum dieses Dokuments hergestellt wurden.
Engins de terrassement - Sécurité fonctionnelle - Partie 5: Tableaux des niveaux de performance (ISO/DIS 19014-5:2025)
Le présent document fournit les tableaux normatifs des niveaux de performance de machine requis (MPLr) par fonction courante et types d’engin de terrassement tels que définis dans l’ISO 6165. Ces MPLr peuvent par conséquent être mis en correspondance ou appliqués aux systèmes de commande de sécurité (SCS) utilisés pour commander ou affecter les fonctions définies dans le tableau.
Les MPLr du présent document sont déterminés au travers du processus d’analyse de sécurité des systèmes de commande de la machine (MCSSA) exposée dans l’ISO 19014-1. Le présent document donne une brève explication sur la manière dont les niveaux, ainsi que les hypothèses associées, ont été établis.
Le présent document n’est pas applicable aux engins de terrassement fabriqués avant la date de sa publication.
Stroji za zemeljska dela - Funkcijska varnost - 5. del: Tabele ravni zmogljivosti (ISO/DIS 19014-5:2025)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2025
Stroji za zemeljska dela - Funkcijska varnost - 5. del: Tabele ravni zmogljivosti
(ISO/DIS 19014-5:2025)
Earth-moving machinery - Functional safety - Part 5: Tables of performance levels
(ISO/DIS 19014-5:2025)
Erdbaumaschinen - Funktionale Sicherheit - Teil 5: Tabellen mit Performance Leveln
(ISO/DIS 19014-5:2025)
Engins de terrassement - Sécurité fonctionnelle - Partie 5: Tableaux des niveaux de
performance (ISO/DIS 19014-5:2025)
Ta slovenski standard je istoveten z: prEN ISO 19014-5
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 19014-5.2
ISO/TC 127/SC 2
Earth-moving machinery —
Secretariat: ANSI
Functional safety —
Voting begins on:
Part 5: 2025-07-25
Tables of performance levels
Voting terminates on:
2025-09-19
Engins de terrassement — Sécurité fonctionnelle —
Partie 5: Tableaux des niveaux de performance
ICS: 53.100
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 19014-5.2:2025(en)
DRAFT
ISO/DIS 19014-5.2:2025(en)
International
Standard
ISO/DIS 19014-5.2
ISO/TC 127/SC 2
Earth-moving machinery —
Secretariat: ANSI
Functional safety —
Voting begins on:
Part 5:
2025-07-25
Tables of performance levels
Voting terminates on:
2025-09-19
Engins de terrassement — Sécurité fonctionnelle —
Partie 5: Tableaux des niveaux de performance
ICS: 53.100
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 19014-5.2:2025(en)
ii
ISO/DIS 19014-5.2:2025(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General . 3
4.1 General principles .3
4.1.1 Safety requirements .3
4.2 Mapping of functions to a SCS .3
4.3 Applicability of the listed MPL to machines .3
r
4.4 Truncation .4
4.5 Effects of different technologies on MCSSA .4
4.6 Supporting diagrams and data for the tables of machine performance levels .5
5 Additional MCSSA scenario information . 5
5.1 Traffic rate on road .5
5.2 Steering while roading .5
5.3 Slow/stop and machine speed .7
5.4 Work cycles .7
5.4.1 Dumpers . .8
5.4.2 Excavators .8
5.4.3 Wheel loaders . . .9
5.4.4 Skid steer loaders .10
5.5 Swing/slew of backhoe loaders and excavators .11
5.5.1 H variable for working beside traffic or co-workers .11
5.5.2 P values for swinging into traffic or co-workers . 12
5.6 Maximum foreseeable P variables for typical areas on a site . 13
5.7 Seat belts . 13
5.8 Maintenance tasks . . 13
5.9 Backhoe arm out and wheeled excavator or backhoe stabilizer down while travelling
or roading . 13
6 Information for use . 14
Annex A (normative) Performance level tables for rigid frame dump trucks .15
Annex B (normative) Articulated-frame dumpers equal to or greater than 22 000 kg
performance level tables . .25
Annex C (normative) Articulated-frame dumpers equal to or less than 22 000 kg performance
level tables .30
Annex D (normative) Crawler excavators less than 109 000 kg performance level tables .36
Annex E (normative) Wheeled excavators performance level tables .50
Annex F (normative) Backhoe loaders performance level tables .66
Annex G (normative) Large wheel loaders equal to or greater than 24 000 kg performance level
tables .77
Annex H (normative) Medium, small and compact wheel loaders less than 24 000 kg
performance level tables . .88
Annex I (normative) Wheeled and crawler skid steer loaders performance level tables .96
Annex J (normative) Landfill compactor performance level tables .105
Annex K (normative) Roller performance level tables .110
Annex L (normative) Grader performance level tables .117
iii
ISO/DIS 19014-5.2:2025(en)
Annex M (normative) Crawler dozer performance level tables . 128
Annex N (normative) Pipelayer performance level tables .136
Annex O (normative) Crawler loader performance level tables .143
Annex P (normative) Wheeled dozer performance level tables .151
Annex Q (normative) Scraper performance level tables .156
Annex R (normative) Crawler excavators equal to or greater than 109 000 kg performance
level tables .162
Annex S (normative) Cable excavator (front shovel) performance level tables .170
Annex T (normative) Cable excavator (dragline) performance level tables .177
Annex U (normative) Compact trencher less than 4 500 kg performance level tables .183
Annex V (normative) Medium trencher greater than or equal to 4 500 kg and less than
18 000 kg performance level tables .199
Annex W (normative) Heavy trencher greater than or equal to 18 000 kg performance level
tables .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.