EN ISO 23875:2022/prA1:2023

SLOVENSKI STANDARD
01-julij-2023
Rudarstvo - Sistemi za nadzor kakovosti zraka za ohišje operaterja - Zahteve glede
zmogljivosti in preskusne metode - Dopolnilo1 (ISO 23875:2021/Amd 1:2022)
Mining - Air quality control systems for operator enclosures - Performance requirements
and test methods - Amendment 1 (ISO 23875:2021/Amd 1:2022)
Bergbau - Luftqualitätskontrollsysteme für Bedienerkabinen - Leistungsanforderungen
und Prüfverfahren - Änderung 1 (ISO 23875:2021/Amd 1:2022)
Exploitation minière - Systèmes de contrôle de la qualité de l’air destinés aux enceintes
de l’opérateur - Exigences de performance et méthodes d’essai - Amendement 1 (ISO
23875:2021/Amd 1:2022)
Ta slovenski standard je istoveten z: EN ISO 23875:2022/prA1
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
73.020 Rudarstvo in kamnolomsko Mining and quarrying
izkopavanje
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL ISO
STANDARD 23875
First edition
2021-02
AMENDMENT 1
2022-06
Mining — Air quality control
systems for operator enclosures —
Performance requirements and test
methods
AMENDMENT 1
Exploitation minière — Systèmes de contrôle de la qualité de l’air
destinés aux enceintes de l’opérateur — Exigences de performance et
méthodes d’essai
AMENDEMENT 1
Reference number
ISO 23875:2021/Amd.1:2022(E)
ISO 23875:2021/Amd.1:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 23875:2021/Amd.1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (s
...