EN 17116-3:2019
(Main)Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 3: Continuous tunnel washer
Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 3: Continuous tunnel washer
This document defines the characteristics of continuous tunnel washer and gives the usual test methods for these characteristics with regard to machine capacity, power consumption and productivity. It is applicable for use as a reference in the drafting of purchasing orders for continuous tunnel washer. In addition it is recommended for determination of energy consumption and productivity according to Directive 2009/125 EC. This document excludes the energy consumption for dewatering of the load. Furthermore, the document describes standard methods for measuring principal performance characteristics of continuous tunnel washer. It does not cover safety requirements (see EN ISO 10472-3).
Anforderungen an industrielle Wäschereimaschinen - Definition und Prüfung von Kapazitäts- und Verbrauchsmerkmalen - Teil 3: Waschstraßen
Dieses Dokument definiert die Gebrauchseigenschaften von Waschstraßen und gibt die üblichen Verfahren zur Prüfung dieser Eigenschaften mit Bezug auf die Maschinenbeladung, den Energieverbrauch und die stündliche Produktionsmenge an. Es dient zur Orientierung bei der Erstellung von Kaufaufträgen für Waschstraßen. Außerdem wird es zur Bestimmung des Energieverbrauchs und der stündlichen Produktionsmenge entsprechend der Richtlinie 2009/125/EG empfohlen. Dieses Dokument behandelt nicht den Energieverbrauch für die Entwässerung der Beladung. Darüber hinaus beschreibt dieses Dokument Standardverfahren für die Messung grundlegender Gebrauchseigenschaften von Waschstraßen. Es behandelt keine Sicherheitsanforderungen (siehe EN ISO 10472-3).
Spécifications pour les machines de blanchisserie industrielles - Définitions et contrôle des caractéristiques de capacité et de consommation - Partie 3: Tunnels de lavage
Le présent projet de Norme européenne définit les caractéristiques des tunnels de lavage et spécifie les méthodes d'essai usuelles pour la détermination de ces caractéristiques, relatives à la capacité, à la consommation d'énergie et à la production horaire de ces machines. Elle sert de référence pour la rédaction des offres d'achat et des commandes pour les tunnels de lavage. De plus, elle est recommandée pour la détermination de la consommation d'énergie et de la production horaire conformément à la Directive 2009/125 CE. La présente norme exclut la consommation d'énergie liée à l'essorage de la charge. Par ailleurs, la norme décrit des méthodes normalisées pour mesurer les principales caractéristiques de performance des tunnels de lavage. Elle ne traite pas des exigences de sécurité (voir l'EN ISO 10472 3).
Specifikacije za industrijske pralnice strojev - Definicije in preskušanje zmogljivosti ter značilnosti porabe - 3. del: Pralni tuneli
Ta osnutek evropskega standarda določa značilnosti pralnih tunelov in podaja običajne preskusne metode za te značilnosti v zvezi z zmogljivostjo strojev, porabo energije in produktivnostjo. Uporablja se kot referenca pri pripravi naročilnic za pralne tunele. Poleg tega se priporoča za določanje porabe energije in produktivnosti v skladu z Direktivo 2009/125/ES. Ta standard ne vključuje porabe energije za odstranjevanje vode iz pralnega tunela. Standard opisuje standardne metode za merjenje glavnih značilnosti delovanja pralnih tunelov. Ne vključuje varnostnih zahtev (glej standard EN ISO 10472-3).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2020
Specifikacije za industrijske pralnice strojev - Definicije in preskušanje
zmogljivosti ter značilnosti porabe - 3. del: Pralni tuneli
Specifications for industrial laundry machines - Definitions and testing of capacity and
consumption characteristics - Part 3: Continuous tunnel washer
Anforderungen an industrielle Wäschereimaschinen - Definition und Prüfung von
Kapazitäts- und Verbrauchsmerkmalen - Teil 3: Durchlaufwaschanlagen
Spécifications pour les machines de blanchisserie industrielles - Définitions et contrôle
des caractéristiques de capacité et de consommation - Partie 3 : Tunnels de lavage
Ta slovenski standard je istoveten z: EN 17116-3:2019
ICS:
97.060 Aparati za nego perila Laundry appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 17116-3
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2019
EUROPÄISCHE NORM
ICS 97.060
English Version
Specifications for industrial laundry machines - Definitions
and testing of capacity and consumption characteristics -
Part 3: Continuous tunnel washer
Spécifications pour les machines de blanchisserie Festlegungen für Wäschereimaschinen - Definition und
industrielles - Définitions et contrôle des Prüfung der Beladung und Verbrauchsmerkmale - Teil
caractéristiques de capacité et de consommation - 3: Waschstraßen
Partie 3: Tunnels de lavage
This European Standard was approved by CEN on 17 September 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17116-3:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 6
1 Scope . 8
2 Normative references . 8
3 Terms, definitions and symbols . 9
3.1 Terms and definitions . 9
3.2 List of symbols . 12
4 Requirements . 16
4.1 General . 16
4.2 Nominal load (of a compartment) . 17
5 General test conditions . 17
5.1 General . 17
5.2 Reference machine . 17
5.3 Ambient conditions . 17
5.3.1 Ambient temperature and humidity . 17
5.3.2 Water supply . 17
5.3.3 Energy supply . 18
5.3.4 Electricity supply . 18
5.3.5 Compressed air supply . 18
5.3.6 Steam supply . 18
5.3.7 Condition of the machine . 18
5.4 Machine/test load . 18
5.4.1 General . 18
5.4.2 Amount of load . 19
5.4.3 Number of test loads . 19
5.4.4 Nature of nominal load. 19
5.4.5 Stain and soil monitors . 20
5.4.6 Wash process control sheets . 21
5.4.7 Rinse performance fabrics . 21
5.4.8 Addition of the test fabrics. 21
5.5 Preparation for testing . 22
5.5.1 General . 22
5.5.2 Installation of the continuous tunnel washer . 22
5.5.3 Washing programme . 22
5.5.4 Preparation of the continuous tunnel washer for a test series . 22
5.5.5 Preparation of the continuous tunnel washer for a test run . 23
5.6 Reference machine . 23
5.7 Preparation of the nominal load . 23
5.7.1 General . 23
5.7.2 Bone dry-conditioning . 24
5.8 Detergent . 24
5.8.1 General . 24
5.8.2 Specification of detergent system . 24
6 Determination of wash performance effects . 25
6.1 General . 25
6.2 Determination of moisture content mc of the soiled load . 25
sl
6.3 Determination of the corrected weight of the nominal load W . 26
c
6.4 Test procedure . 26
6.5 Primary wash performance . 27
6.5.1 General . 27
6.5.2 Expression of results . 28
6.6 Secondary wash performance . 30
6.6.1 General . 30
6.6.2 Expression of results . 30
6.7 Rinse performance . 31
6.7.1 General . 31
6.7.2 Expression of results . 31
6.8 Washing conditions in reference machine . 31
6.8.1 General . 31
6.8.2 Expression of results . 32
7 Determination of energy consumption. 33
7.1 General . 33
7.2 Test procedure . 34
7.3 Determination of electrical energy . 34
7.4 Determination of steam and gas consumption . 34
7.5 Expression of results . 34
8 Determination of water consumption . 36
8.1 General . 36
8.2 Test procedure . 36
8.3 Expression of results . 36
9 Determination of detergent consumption . 37
9.1 General . 37
9.2 Test procedure . 38
9.3 Expression of results . 38
10 Determination o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.