EN 12373-5:1998
(Main)Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
This Part of this European Standard specifies a method for assessing the quality of sealed anodic oxidation coatings on aluminium and its alloys by measurement of the admittance. The method is applicable to anodic oxidation coatings sealed in an aqueous medium. The method is suitable for use as a production control test and as an acceptance test where there is agreement between the supplier and the purchaser.
Aluminium und Aluminiumlegierungen - Anodisieren - Teil 5: Prüfung der Qualität von verdichteten, anodisch erzeugten Oxidschichten durch Messung des Scheinleitwertes
Dieser Teil dieser Europäischen Norm legt ein Verfahren fest, mit dem man die Qualität von verdichteten, anodisch erzeugten Oxidschichten auf Aluminium und Aluminiumlegierungen durch Messung des Scheinleitwertes prüfen kann. Das Verfahren ist auf anodisch erzeugte Oxidschichten anwendbar, die in einer wäßrigen Lösung verdichtet wurden. Das Verfahren kann zur innerbetrieblichen Produktionsüberwachung angewendet werden. Nach Vereinbarung zwischen Hersteller und Besteller ist es auch für Abnahmeprüfungen geeignet.
Aluminium et alliages d'aluminium - Anodisation - Partie 5: Evaluation de la qualité des couches anodiques colmatées par mesurage de l'admittance
La présente norme européenne spécifie une méthode d'évaluation de la qualité des couches anodiques colmatées sur l'aluminium et les alliages d'aluminium, par mesurage de l'admittance. Cette méthode est applicable aux couches anodiques colmatées en milieu aqueux. La méthode convient aux contrôles de production. Elle peut également convenir aux contrôles de réception lorsqu'il y a entente entre producteur et acheteur.
Aluminij in aluminijeve zlitine - Anodna oksidacija - 5. del: Preskus kakovosti tesnjenih anodnooksidiranih prevlek z meritvijo admitance
General Information
- Status
- Withdrawn
- Publication Date
- 17-Nov-1998
- Withdrawal Date
- 30-Jun-2010
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 15 - Aluminium anodisation
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Jul-2010
- Completion Date
- 01-Jul-2010
Relations
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN 12373-5:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance". This standard covers: This Part of this European Standard specifies a method for assessing the quality of sealed anodic oxidation coatings on aluminium and its alloys by measurement of the admittance. The method is applicable to anodic oxidation coatings sealed in an aqueous medium. The method is suitable for use as a production control test and as an acceptance test where there is agreement between the supplier and the purchaser.
This Part of this European Standard specifies a method for assessing the quality of sealed anodic oxidation coatings on aluminium and its alloys by measurement of the admittance. The method is applicable to anodic oxidation coatings sealed in an aqueous medium. The method is suitable for use as a production control test and as an acceptance test where there is agreement between the supplier and the purchaser.
EN 12373-5:1998 is classified under the following ICS (International Classification for Standards) categories: 25.220.10 - Surface preparation; 77.120.10 - Aluminium and aluminium alloys. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12373-5:1998 has the following relationships with other standards: It is inter standard links to EN ISO 2931:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12373-5:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine - Anodna oksidacija - 5. del: Preskus kakovosti tesnjenih anodnooksidiranih prevlek z meritvijo admitanceAluminium und Aluminiumlegierungen - Anodisieren - Teil 5: Prüfung der Qualität von verdichteten, anodisch erzeugten Oxidschichten durch Messung des ScheinleitwertesAluminium et alliages d'aluminium - Anodisation - Partie 5: Evaluation de la qualité des couches anodiques colmatées par mesurage de l'admittanceAluminium and aluminium
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...