Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications

This part of EN 1715 applies to drawing stock of aluminium alloys for welding and specifies characteristics and specific technical conditions for inspection and delivery of these products.  The general requirements and technical conditions for inspection and delivery are specified in EN 1715-1.  This standard does not apply to drawn wire.

Aluminium und Aluminiumlegierungen - Vordraht - Teil 4: Besondere Anforderungen für schweißtechnische Anwendungen

Dieser Teil von prEN 1715 gilt für Vordraht aus Aluminium und Aluminiumlegierungen für schweißtechnische Anwendungen und legt die Eigenschaften sowie die besonderen technischen Lieferbedingungen für diese Erzeugnisse fest. Die allgemeinen Anforderungen und technischen Lieferbedingungen sind in prEN 1715-1 festgelegt. Diese Norm gilt nicht für gezogenen Draht.

Aluminium et alliages d'aluminium - Fil machine - Partie 4: Exigences spécifiques pour les applications soudage

Cette partie du prEN 1715 s'applique au fil machine en aluminium et alliages d'aluminium pour soudage et définit les caractéristiques particulières et les conditions techniques de contrôle et de livraison spécifiques à ce produit. Les caractéristiques et conditions générales sont spécifiées dans le prEN 1715-1. Cette norme ne s'applique pas au fil étiré.

Aluminij in aluminijeve zlitine - Debela žica - 4. del: Posebne zahteve za varjenje

General Information

Status
Withdrawn
Publication Date
16-Sep-1997
Withdrawal Date
15-Apr-2008
ICS
77.150.10 - Aluminium products
Technical Committee
CEN/TC 132 - Aluminium and aluminium alloys
Drafting Committee
CEN/TC 132/WG 4 - Wires and drawing stock
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
16-Apr-2008
Completion Date
16-Apr-2008
Directive
97/23/EC - Pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN 1715-4:1998 - Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications

Relations

Replaced By
EN 1715-4:2008 - Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications
Effective Date
22-Dec-2008
Referred By
EN 1568-4:2018 - Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids
Effective Date
28-Jan-2026
Referred By
EN 14370:2004 - Surface active agents - Determination of surface tension
Effective Date
28-Jan-2026
Referred By
EN 14291:2004 - Foam producing solutions for leak detection on gas installations
Effective Date
28-Jan-2026
Referred By
EN 1568-2:2018 - Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids
Effective Date
28-Jan-2026
Referred By
EN 1568-1:2018 - Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids
Effective Date
28-Jan-2026
Referred By
EN 1568-1:2008 - Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids
Effective Date
28-Jan-2026
Referred By
EN 1568-4:2008 - Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids
Effective Date
28-Jan-2026
Referred By
EN 1568-3:2008 - Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids
Effective Date
28-Jan-2026
Referred By
EN 1568-3:2018 - Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids
Effective Date
28-Jan-2026
Referred By
EN 1568-2:2008 - Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids
Effective Date
28-Jan-2026
Referred By
EN 13443-2:2005+A1:2007 - Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing
Effective Date
28-Jan-2026
Referred By
EN 14652:2005+A1:2007 - Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing
Effective Date
28-Jan-2026

Get Certified

Connect with accredited certification bodies for this standard

Element Materials Technology

Materials testing and product certification.

UKAS United Kingdom Verified
Visit Website

Inštitut za kovinske materiale in tehnologije

Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.

SA Slovenia Verified
Visit Website

Sponsored listings

Frequently Asked Questions

EN 1715-4:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications". This standard covers: This part of EN 1715 applies to drawing stock of aluminium alloys for welding and specifies characteristics and specific technical conditions for inspection and delivery of these products. The general requirements and technical conditions for inspection and delivery are specified in EN 1715-1. This standard does not apply to drawn wire.

This part of EN 1715 applies to drawing stock of aluminium alloys for welding and specifies characteristics and specific technical conditions for inspection and delivery of these products. The general requirements and technical conditions for inspection and delivery are specified in EN 1715-1. This standard does not apply to drawn wire.

EN 1715-4:1997 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 1715-4:1997 has the following relationships with other standards: It is inter standard links to EN 1715-4:2008, EN 1568-4:2018, EN 14370:2004, EN 14291:2004, EN 1568-2:2018, EN 1568-1:2018, EN 1568-1:2008, EN 1568-4:2008, EN 1568-3:2008, EN 1568-3:2018, EN 1568-2:2008, EN 13443-2:2005+A1:2007, EN 14652:2005+A1:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 1715-4:1997 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 1715-4:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-1998
Aluminij in aluminijeve zlitine - Debela žica - 4. del: Posebne zahteve za varjenje
Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for
welding applications
Aluminium und Aluminiumlegierungen - Vordraht - Teil 4: Besondere Anforderungen für
schweißtechnische Anwendungen
Aluminium et alliages d'a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...