Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part 2: Determination of properties (ISO 4586-2:1988, modified)

Decorative high-pressure laminated sheet: A sheet consisting of layers of fibrous sheet material (for example paper) impregnated with thermosetting resins and bonded together by means of heat and a pressure of not less than 7 MPa*, a layer or layers on one or both sides having decorative colours or designs.

Dekorative Hochdruck-Schichtpreßstoffplatten (HPL) - Platten auf Basis härtbarer Harze - Teil 2: Bestimmung der Eigenschaften (ISO 4586-2:1988, modifiziert)

Dekorative Hochdruck-Schichpressstoffplatte: eine Platte bestehend aus Schichten Von Faserstoffbahnen (z. B. Papier), imprägniert mit härtbaren Harzen und bei hoher Temperatur und einem Druck Von nicht weniger als MPa (1 MPa = 1 MN/mm2), wobei die äussere Schicht oder die Schichten auf einer oder beiden Oberflächen dekorative Farben oder Designs tragen.

Stratifiés décoratifs haute pression (HPL) - Plaques à base de résines thermodurcissables - Partie 2: Détermination des caractéristiques (ISO 4586-2:1988, modifiée)

Plaque de stratifié décoratif haute pression: plaque comportant des couches de matériaux fibreux sous forme de feuilles (par example papier) imprégnées de résines thermodurcissables et liées ensemble par l'action de la chaleur et d'une pression d'au moins 7 MPa (1), une ou pluisieurs couches sur l'une ou les deux faces de la plaque présentant des couleurs ou des dessins décoratifs.

Okrasni visokotlačni laminati (HPL) – Plošče iz duromerov - 2. del: Ugotavljanje lastnosti (ISO 4586-2:1988, modificiran)

General Information

Status
Withdrawn
Publication Date
07-May-1991
Withdrawal Date
25-Jan-2005
ICS
83.140.20 - Laminated sheets
Technical Committee
CEN/TC 249 - Plastics
Drafting Committee
CEN/TC 249 - Plastics
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
26-Jan-2005
Completion Date
26-Jan-2005
Ref Project
SIST EN 438-2:1999 - Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part 2: Determination of properties (ISO 4586-2:1988, modified)

Relations

Replaced By
EN 438-6:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 6: Classification and specifications for Exterior-grade Compact laminates of thickness 2 mm and greater
Effective Date
22-Dec-2008
Replaced By
EN 438-5:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
Effective Date
22-Dec-2008
Replaced By
EN 438-4:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 4: Classification and specifications for Compact laminates of thickness 2 mm and greater.
Effective Date
22-Dec-2008
Replaced By
EN 438-7:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
Effective Date
22-Dec-2008
Replaced By
EN 438-1:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 1: Introduction and general information
Effective Date
22-Dec-2008
Replaced By
EN 438-3:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
Effective Date
22-Dec-2008
Replaced By
EN 438-2:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called Laminates) - Part 2: Determination of properties
Effective Date
22-Dec-2008

Frequently Asked Questions

EN 438-2:1991 is a standard published by the European Committee for Standardization (CEN). Its full title is "Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part 2: Determination of properties (ISO 4586-2:1988, modified)". This standard covers: Decorative high-pressure laminated sheet: A sheet consisting of layers of fibrous sheet material (for example paper) impregnated with thermosetting resins and bonded together by means of heat and a pressure of not less than 7 MPa*, a layer or layers on one or both sides having decorative colours or designs.

Decorative high-pressure laminated sheet: A sheet consisting of layers of fibrous sheet material (for example paper) impregnated with thermosetting resins and bonded together by means of heat and a pressure of not less than 7 MPa*, a layer or layers on one or both sides having decorative colours or designs.

EN 438-2:1991 is classified under the following ICS (International Classification for Standards) categories: 83.140.20 - Laminated sheets. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 438-2:1991 has the following relationships with other standards: It is inter standard links to EN 438-6:2005, EN 438-5:2005, EN 438-4:2005, EN 438-7:2005, EN 438-1:2005, EN 438-3:2005, EN 438-2:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 438-2:1991 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-1999
2NUDVQLYLVRNRWODþQLODPLQDWL +3/ ±3ORãþHL]GXURPHURYGHO8JRWDYOMDQMH
ODVWQRVWL ,62PRGLILFLUDQ
Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part
2: Determination of properties (ISO 4586-2:1988, modified)
Dekorative Hochdruck-Schichtpreßstoffplatten (HPL) - Platten auf Basis härtbarer Harze
- Teil 2: Bestimmung der Eigenschaften (ISO 4586-2:1988, modifiziert)
Stratifiés décoratifs haute pression (HPL) - Plaques a base de résines
thermodurcissables - Partie 2: Détermination des caractéristiques (ISO 4586-2:1988,
modifiée)
Ta slovenski standard je istoveten z: EN 438-2:1991
ICS:
83.140.20 /DPLQDWQHSORãþH Laminated sheets
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 438-2:1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...