iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 976-2:1997

(Main)

Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks

Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks

This part 2 of this European standard EN 976 specifies the requirements for the transportation, site handling, storage and installation of horizontal, cylindrical single wall tanks made of glass reinforced thermosetting resins used for the underground non-pressure storage of liquid petroleum based fuels, complying with the requirement of EN 976-1.

Unterirdische Tanks aus textilglasverstärkten Kunststoffen (GFK) - Liegende zylindrische Tanks für die drucklose Lagerung von flüssigen Kraftstoffen auf Erdölbasis - Teil 2: Transport, Handhabung, Zwischenlagerung und Einbau einwandiger Tanks

Dieser Teil 2 der europäischen Norm EN 976 legt die Anforderungen beim Transport, bei der Handhabung auf der Baustelle, bei der Zwischenlagerung und dem Einbau von liegenden zylindrischen, einwandigen Tanks aus textilglasverstärkten Reaktionsharz-Formstoffen für die unterirdische, drucklose Lagerung von flüssigen Kraftstoffen auf Erdölbasis fest, die den Anforderungen der EN 976-1 entsprechen.

Réservoirs enterrés en plastiques renforcés de verre (PRV) - Réservoirs cylindriques horizontaux pour le stockage sans pression de carburants ou combustibles pétroliers liquides - Partie 2: Transport, manutention, stockage et installation de réservoirs à simple paroi

La présente norme européenne prescrit les prescriptions concernant le transport, la manutention, le stockage et l'installation de réservoirs horizontaux cylindriques à simple paroi en résines thermodurcissables renforcées de fibre de verre utilisés pour le stockage sans pression souterrain de carburants et combustibles pétroliers liquides conformes aux prescriptions de l'EN 976-1.

Podzemni rezervoarji iz armiranega poliestra - Horizontalni cilindrični rezervoarji za breztlačno shranjevanje utekočinjenih goriv na osnovi nafte - 2. del: Transport, rokovanje, shranjevanje in postavitev enoplaščnih rezervoarjev

General Information

Status
Published
Publication Date
22-Jul-1997
ICS
23.020.10 - Stationary containers and tanks
Technical Committee
CEN/TC 210 - GRP tanks and vessels
Drafting Committee
CEN/TC 210/SC 1 - Underground GRP-tanks for non-pressure storage of liquids
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
04-Mar-2023
Completion Date
04-Mar-2023
Ref Project
SIST EN 976-2:2000 - Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks

Buy Standard

EN 976-2:2000 (EN)EN 976-2:2000 (EN)
PreviousNext
Standard
EN 976-2:2000 (EN)
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
EN 976-2:2000 (DE)EN 976-2:2000 (DE)
PreviousNext
Standard
EN 976-2:2000 (DE)
German language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 976-2:2000
01-december-2000
3RG]HPQLUH]HUYRDUMLL]DUPLUDQHJDSROLHVWUD+RUL]RQWDOQLFLOLQGULþQLUH]HUYRDUML
]DEUH]WODþQRVKUDQMHYDQMHXWHNRþLQMHQLKJRULYQDRVQRYLQDIWHGHO7UDQVSRUW
URNRYDQMHVKUDQMHYDQMHLQSRVWDYLWHYHQRSODãþQLKUH]HUYRDUMHY
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for
the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling,
storage and installation of single wall tanks
Unterirdische Tanks aus textilglasverstärkten Kunststoffen (GFK) - Liegende zylindrische
Tanks für die drucklose Lagerung von flüssigen Kraftstoffen auf Erdölbasis - Teil 2:
Transport, Handhabung, Zwischenlagerung und Einbau einwandiger Tanks
Réservoirs enterrés en plastiques renforcés de verre (PRV) - Réservoirs cylindriques
horizontaux pour le stockage sans pression de carburants ou combustibles pétroliers
liquides - Partie 2: Transport, manutention, stockage et installation de réservoirs a simple
paroi
Ta slovenski standard je istoveten z: EN 976-2:1997
ICS:
23.020.10 1HSUHPLþQHSRVRGHLQ Stationary containers and
UH]HUYRDUML tanks
SIST EN 976-2:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 976-2:2000

---------------------- Page: 2 ----------------------

SIST EN 976-2:2000

---------------------- Page: 3 ----------------------

SIST EN 976-2:2000

---------------------- Page: 4 ----------------------

SIS
...

SLOVENSKI STANDARD
SIST EN 976-2:2000
01-december-2000
3RG]HPQLUH]HUYRDUMLL]DUPLUDQHJDSROLHVWUD+RUL]RQWDOQLFLOLQGULþQLUH]HUYRDUML
]DEUH]WODþQRVKUDQMHYDQMHXWHNRþLQMHQLKJRULYQDRVQRYLQDIWHGHO7UDQVSRUW
URNRYDQMHVKUDQMHYDQMHLQSRVWDYLWHYHQRSODãþQLKUH]HUYRDUMHY
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for
the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling,
storage and installation of single wall tanks
Unterirdische Tanks aus textilglasverstärkten Kunststoffen (GFK) - Liegende zylindrische
Tanks für die drucklose Lagerung von flüssigen Kraftstoffen auf Erdölbasis - Teil 2:
Transport, Handhabung, Zwischenlagerung und Einbau einwandiger Tanks
Réservoirs enterrés en plastiques renforcés de verre (PRV) - Réservoirs cylindriques
horizontaux pour le stockage sans pression de carburants ou combustibles pétroliers
liquides - Partie 2: Transport, manutention, stockage et installation de réservoirs a simple
paroi
Ta slovenski standard je istoveten z: EN 976-2:1997
ICS:
23.020.10 1HSUHPLþQHSRVRGHLQ Stationary containers and
UH]HUYRDUML tanks
SIST EN 976-2:2000 de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 976-2:2000

---------------------- Page: 2 ----------------------

SIST EN 976-2:2000

---------------------- Page: 3 ----------------------

SIST EN 976-2:2000

---------------------- Page: 4 ----------------------

SIS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13121-1:2021(Main)
GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria
SIST EN 13121-1:2021

This document gives requirements for specification and acceptance conditions of raw materials for GRP tanks and vessels with or without lining for storage or processing of fluids, factory made or site built, non-pressurised or pressurised, for use above ground.
Tanks and vessels for storage or processing of food, raw materials for food and potable water additionally have to be in compliance with relevant EU directives and applicable national standards and regulations.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 13121-5:2017(Main)
GRP tanks and vessels for use above ground - Part 5: Example calculation of a GRP-vessel
SIST-TP CEN/TR 13121-5:2018

This Technical Report gives guidance for the design of a vessel using the standard EN 13121 3 GRP tanks and vessels for use above ground. The calculation is done according to the advanced design method given in EN 13121 3:2016, 7.9.3 with approved laminates and laminate properties.

  • Technical report
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13121-3:2016(Main)
GRP tanks and vessels for use above ground - Part 3: Design and workmanship
SIST EN 13121-3:2016

This European Standard gives requirements for the design, fabrication, inspection, testing and verification of GRP tanks and vessels with or without thermoplastics lining for storage or processing of fluids, factory made or site built, non-pressurized or pressurized up to 10 bar, for use above ground. Further requirements are presented in normative Annex G.
The terms vessels and tanks as used in this part of EN 13121 include branches up to the point of connection to pipe work or other equipment by bolting and supports, brackets or other attachments bonded directly to the shell.
This part of EN 13121 covers vessels and tanks subject to temperatures between - 40 °C and 120 °C.
Excluded from this part of EN 13121 are:
-   tanks and vessels for the transport of fluids;
-   underground storage tanks;
-   spherical vessels;
-   vessels and tanks of irregular shape;
-   tanks and vessels with double containment where the double wall is considered structural;
-   tanks and vessels which are subject to the risk of explosion, or failure of which may cause an emission of radioactivity;
-   specification for fibre reinforced cisterns of one piece and sectional construction for the storage, above ground, of cold water (see EN 13280).

  • Standard
    207 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13121-4:2005/AC:2007(Corrigendum)
GRP tanks and vessels for use above ground - Part 4: Delivery, installation and maintenance
SIST EN 13121-4:2005/AC:2007

TC - Modification to Table A.1

  • Corrigendum
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13121-4:2005(Main)
GRP tanks and vessels for use above ground - Part 4: Delivery, installation and maintenance
SIST EN 13121-4:2005

This document gives requirements for delivery, installation and maintenance of GRP tanks and vessels in accordance with prEN 13121- 3.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13121-2:2003(Main)
GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance
SIST EN 13121-2:2004

This European Standard gives requirements for chemical resistance of composite materials used for GRP tanks and vessels for storage or processing of fluids, for use above ground. The tanks or vessels may be factory made or site built, with or without lining.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13280:2001(Main)
Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water
SIST EN 13280:2002

This European Standard specifies the requirements for rectangular and vertical cylindrical glass reinforced plastics (GRP) one piece cisterns and rectangular sectional tanks for the storage of water above ground for both domestic and industrial use within the following capacity ranges,
a)    one piece cistern    500 l to 100 000 l.
b)    sectional tank    500 l and larger
Particular requirements for additional components for cisterns for domestic use are also included.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 976-1:1997(Main)
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks
SIST EN 976-1:2000

This Part 1 of European Standard EN 976 specifies the requirements and associated test methods for horizontal, cylindrical single walls tanks made of glass reinforced thermosetting resins (hereafter called tanks), and for their accessories, used for the underground non-pressure storage of liquid petroleum based fuels. The tanks specified by this European Standard are tanks with one or more compartments and with or without the possibility of leak detection.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 978:1997(Main)
Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta
SIST EN 978:2000

This European standard specifies a test method for the determination of the factor alpha and the factor beta of test specimens of tanks of glass reinforced thermosetting resins for the underground storage of liquids.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 977:1997(Main)
Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids
SIST EN 977:2000

This European standard specifies a method for the one side exposure to fluids of samples of tanks of glass reinforced thermosetting resins for the underground storage of liquids.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day