EN 10016-1:1994
(Main)Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements
Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements
1.1 This European Standard is applicable to rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section of the rod may be round, square, rectangular, hexagonal, half-round or another shape and as a general rule of nominal size 5 mm or above (see EURONORM 17) : the surface is smooth. 1.2 It is not applicable to following products for which standards exist or are under study such as : - steel rod intended for heat treatment (see EN 10083 and EURONORM 84, 85 and 86) ; - rod of free-cutting steels (see EURONORM 87) ; - steel rod for cold heading and cold extrusion (see EURONORM 119) ; - steel rod intended for the production of electrodes and products for welding (see EURONORM 133) ; - steel rod for welded fabric for reinforcement for concrete (see prENV 10080) ; - steel rod for wire for high fatique stength mechanical springs, such as valve springs. 1.3 In addition to the requirements of this standards the general technical delivery requirements specified in EN 10021 apply.
Walzdraht aus unlegiertem Stahl zum Ziehen und/oder Kaltwalzen - Teil 1: Allgemeine Anforderungen
Diese europäische Norm gilt für Walzdraht aus unlegiertem Stahl zum Ziehen und/oder Kaltwalzen. Der Querschnitt des Walzdrahtes ist rund, vierkant, rechteckig, sechskant, halbrund oder von anderer Form und sein Nennmaß beträgt im allgemeinen >= 5 mm (siehe Euronorm 17); seine Oberfläche ist glatt.
Fil machine en acier non-allié destiné au tréfilage et/ou au laminage à froid - Partie 1: Prescriptions générales
La présente norme européenne s'applique au fil-machine en acier non allié destiné au tréfilage et/ou au laminage à froid. La section droite du fil-mechine peut être circulaire, carrée, rectangulaire, hexagonale, demi-ronde ou autre et en règle générale de dimension nominale supérieure ou égale à 5 mm (voir Euronorm 17); la surface est lisse.
Vroče valjana žica iz nelegiranega jekla za vlečenje in/ali hladno valjanje - 1. del: Splošne zahteve
General Information
- Status
- Withdrawn
- Publication Date
- 07-Dec-1994
- Withdrawal Date
- 30-Jun-2011
- Technical Committee
- ECISS/TC 106 - Wire rod and wires
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Jul-2011
- Completion Date
- 01-Jul-2011
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 11-Jul-2011
Frequently Asked Questions
EN 10016-1:1994 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements". This standard covers: 1.1 This European Standard is applicable to rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section of the rod may be round, square, rectangular, hexagonal, half-round or another shape and as a general rule of nominal size 5 mm or above (see EURONORM 17) : the surface is smooth. 1.2 It is not applicable to following products for which standards exist or are under study such as : - steel rod intended for heat treatment (see EN 10083 and EURONORM 84, 85 and 86) ; - rod of free-cutting steels (see EURONORM 87) ; - steel rod for cold heading and cold extrusion (see EURONORM 119) ; - steel rod intended for the production of electrodes and products for welding (see EURONORM 133) ; - steel rod for welded fabric for reinforcement for concrete (see prENV 10080) ; - steel rod for wire for high fatique stength mechanical springs, such as valve springs. 1.3 In addition to the requirements of this standards the general technical delivery requirements specified in EN 10021 apply.
1.1 This European Standard is applicable to rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section of the rod may be round, square, rectangular, hexagonal, half-round or another shape and as a general rule of nominal size 5 mm or above (see EURONORM 17) : the surface is smooth. 1.2 It is not applicable to following products for which standards exist or are under study such as : - steel rod intended for heat treatment (see EN 10083 and EURONORM 84, 85 and 86) ; - rod of free-cutting steels (see EURONORM 87) ; - steel rod for cold heading and cold extrusion (see EURONORM 119) ; - steel rod intended for the production of electrodes and products for welding (see EURONORM 133) ; - steel rod for welded fabric for reinforcement for concrete (see prENV 10080) ; - steel rod for wire for high fatique stength mechanical springs, such as valve springs. 1.3 In addition to the requirements of this standards the general technical delivery requirements specified in EN 10021 apply.
EN 10016-1:1994 is classified under the following ICS (International Classification for Standards) categories: 77.140.65 - Steel wire, wire ropes and link chains. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10016-1:1994 has the following relationships with other standards: It is inter standard links to EN ISO 16120-1:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10016-1:1994 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC, 97/23/EC; Standardization Mandates: M/071, M/116, M/BC/CEN/89/10. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10016-1:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Walzdraht aus unlegiertem Stahl zum Ziehen und/oder Kaltwalzen - Teil 1: Allgemeine AnforderungenFil machine en acier non-allié destiné au tréfilage et/ou au laminage a froid - Partie 1: Prescriptions généralesNon-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and l
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...