EN 2633:1993
(Main)Aerospace series - Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm <= a or D <= 150 mm with peripheral coarse grain control
Aerospace series - Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm <= a or D <= 150 mm with peripheral coarse grain control
This standard specifies the requirements relating to extruded bars and sections in aluminium alloy, AL-P2024-, for use in the T3511 condition, 1,2 mm <= a or D <= 150 mm, with peripheral coarse grain control, for aerospace applications. This standard may also be used to supply material in the T3510 condition, if the purchaser specifies this condition on the order. In this case the designation of line 97 shall not be used.
Luft- und Raumfahrt - Aluminiumlegierung AL-P2024-T3511 - Stranggepreßte Stangen und Profile 1,2 mm <= a oder D <= 150 mm mit Kontrolle der Grobkornrandzone
Diese Norm legt die Anforderungen an stranggepresste Stangen und Profile in Aluminiumlegierung AL-P2024-, zur Verwendung im Zustand T3511, 1,2 mm <= a oder D <= 150 mm, mit Kontrolle der Grobrandzone, für die Luft- und Raumfahrt fest. Diese Norm kann auch für einen Werkstoff im Zustand T3510 angewandt werden, wenn der Käufer diesen Zustand in der Bestellung festlegt. In diesem Fall darf die Bezeichnung der Zeile 97 nicht verwendet werden.
Série aérospatiale - Alliage d'aluminium AL-P2024-T3511 - Barres et profilés filés 1,2 mm <= a ou D <= 150 mm avec contrôle de la zone périphérique à gros grains
La présente norme spécifie les exigences relatives aux barres et profilés filés en alliage d'aluminium AL-P2024-, pour l'utilisation dans l'état T3511 <= a ou D <= 150 mm, avec contrôle de la zone périphérique à gros grains, pour applications aérospatiales. Elle peut être utilisée pour applications aérospatiales. Elle peut être utilisée pour approvisionner le matériau dans l'état T3510, si l'acheteur spécifie cet état à la commande. Dans ce cas, la désignation de la ligne 97 ne doit pas être utilisée.
Aerospace series - Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm <= a or D <= 150 mm with peripheral coarse grain control
General Information
- Status
- Withdrawn
- Publication Date
- 08-Dec-1993
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- ASD-STAN - Aerospace
- Drafting Committee
- ASD-STAN/D 4 - Metallic
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 18-Nov-2015
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 25-Nov-2015
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
NSF-ISR
NSF International Strategic Registrations.
Orion Registrar Inc.
US-based certification body for management systems.
Sponsored listings
Frequently Asked Questions
EN 2633:1993 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm <= a or D <= 150 mm with peripheral coarse grain control". This standard covers: This standard specifies the requirements relating to extruded bars and sections in aluminium alloy, AL-P2024-, for use in the T3511 condition, 1,2 mm <= a or D <= 150 mm, with peripheral coarse grain control, for aerospace applications. This standard may also be used to supply material in the T3510 condition, if the purchaser specifies this condition on the order. In this case the designation of line 97 shall not be used.
This standard specifies the requirements relating to extruded bars and sections in aluminium alloy, AL-P2024-, for use in the T3511 condition, 1,2 mm <= a or D <= 150 mm, with peripheral coarse grain control, for aerospace applications. This standard may also be used to supply material in the T3510 condition, if the purchaser specifies this condition on the order. In this case the designation of line 97 shall not be used.
EN 2633:1993 is classified under the following ICS (International Classification for Standards) categories: 49.025.20 - Aluminium. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 2633:1993 has the following relationships with other standards: It is inter standard links to EN 2633:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 2633:1993 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm <= a or D <= 150 mm with peripheral coarse grain controlLuft- und Raumfahrt - Aluminiumlegierung AL-P2024-T3511 - Stranggepreßte Stangen und Profile 1,2 mm <= a oder D <= 150 mm mit Kontrolle der GrobkornrandzoneSérie aérospatiale - Alliage d'aluminium AL-P2024-T3511 - Barres et profilés filés 1,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...