prEN ISO 8102-2

SLOVENSKI STANDARD
01-julij-2025
Električne zahteve za dvigala (lifte), tekoče stopnice in tekoče steze - 2. del:
Elektromagnetna združljivost glede odpornosti proti motnjam (ISO/DIS 8102-
2:2025)
Electrical requirements for lifts, escalators and moving walks - Part 2: Electromagnetic
compatibility with regard to immunity (ISO/DIS 8102-2:2025)
Elektrische Anforderungen an Aufzüge, Fahrtreppen und Fahrsteige - Teil 2:
Elektromagnetische Verträglichkeit hinsichtlich Störfestigkeit (ISO/DIS 8102-2:2025)
Exigences électriques pour les ascenseurs, les escaliers mécaniques et les trottoirs
roulants - Partie 2: Compatibilité électromagnétique en ce qui concerne l’immunité
(ISO/DIS 8102-2:2025)
Ta slovenski standard je istoveten z: prEN ISO 8102-2
ICS:
33.100.20 Imunost Immunity
91.140.90 Dvigala. Tekoče stopnice Lifts. Escalators
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
International
Standard
ISO/DIS 8102-2
ISO/TC 178
Electrical requirements for lifts,
Secretariat: AFNOR
escalators and moving walks —
Voting begins on:
Part 2: 2025-05-21
Electromagnetic compatibility with
Voting terminates on:
2025-08-13
regard to immunity
Exigences électriques pour ascenseurs, escaliers mécaniques et
trottoirs roulants —
Partie 2: Compatibilité électromagnétique en ce qui concerne
l'immunité
ICS: 91.140.90
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 8102-2:2025(en)
DRAFT
ISO/DIS 8102-2:2025(en)
International
Standard
ISO/DIS 8102-2
ISO/TC 178
Electrical requirements for lifts,
Secretariat: AFNOR
escalators and moving walks —
Voting begins on:
Part 2:
Electromagnetic compatibility with
Voting terminates on:
regard to immunity
Exigences électriques pour ascenseurs, escaliers mécaniques et
trottoirs roulants —
Partie 2: Compatibilité électromagnétique en ce qui concerne
l'immunité
ICS: 91.140.90
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 8102-2:2025(en)
ii
ISO/DIS 8102-2:2025(en)
Contents Page
Foreword (ISO) .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Test procedure . 5
5 Immunity requirements . 7
5.1 Immunity tests .7
5.2 Performance criteria .11
6 Test report . 14
7 Information for use .15
Annex ZA (informative) Relationship between this European standard and the essential
requirements of Directive 2014/30/EU [2014 OJ L96] aimed to be covered .16
Annex ZB (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 19
Annex ZC (informative) Relationship between this European Standard and the essential
requirements of Directive 2014/33/EU aimed to be covered .20
Annex ZD (informative) Relationship between this European Standard and the essential
requirements of Regulation (EU) 2023/1230 aimed to be covered .21
Bibliography .22

iii
ISO/DIS 8102-2:2025(en)
Foreword (ISO)
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 178 Lifts, escalators and moving walks in
collaboration with Technical Committee CEN/TC 10 “Lifts, escalators and moving walks”.
This second edition cancels and replaces the first edition (ISO 8102-2:2021), which has been technically
revised.
The main changes are as follows:
— the term ”system” is replaced with “equipment under control” (EUC);
— defined performance criteria for different functions of the EUC;
— test values are aligned with the generic EMC standards;
— the frequency range of radio frequency electromagnetic field test has been extended up to 6 000 MHz;
— naming of the clauses.
A list of all parts in the ISO 8100 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
European foreword (CEN)
This document (prEN ISO 8102-2:2024) has been prepared by Technical Committee CEN/TC 10 “Lifts,
escalators and moving walks”, in collaboration with Technical Committee ISO/TC 178 “Lifts, escalators and
moving walks” the secretariat of which is held by AFNOR.
This document is currently submitted to CEN Enquiry.
This document will supersede EN 12016:2013.
This document includes the following significant technical changes with respect to EN 12016:2013:

iv
ISO/DIS 8102-2:2025(en)
— the term ”system” is replaced with “equipment under control” (EUC);
— defined performance criteria for different functions of the EUC;
— test values are aligned with the generic EMC standards;
— the frequency range of radio frequency electromagnetic field test has been extended up to 6 000 MHz;
— naming of the clauses.
This document is part of the EN 81 series of standards. The structure of the EN 81 series is described in
CEN/TR 81-10:2008.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annexes ZA, ZB and ZC, which are an integral part
of this document.
v
ISO/DIS 8102-2:2025(en)
Introduction
This document is a type-C standard as stated in ISO 12100.
This document is of relevance, in particular, for the following stakeholder groups representing the market
players with regard to machinery safety:
— machine manufacturers (small, medium and large enterprises);
— health and safety bodies (regulators, accident prevention organisations, market surveillance etc.)
Others can be affected by the level of machinery safety achieved with the means of the document by the
above-mentioned stakeholder groups:
— machine users/employers (small, medium and large enterprises);
— machine users/employees (e.g. trade unions, organizations for people with special needs);
— service providers, e. g. for maintenance (small, medium and large enterprises);
— consumers (in case of machinery intended for use by consumers).
The above-mentioned stakeholder groups have been given the possibility to participate at the drafting
process of this document.
The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are
covered are indicated in the Scope of this document.
When requirements of this type-C standard are different from those which are stated in type-A or type-B
standards, the requirements of this type-C standard take precedence over the requirements of the other
standards for machines that have been designed and built according to the requirements of this type-C
standard.This is a product family EMC standard covering the immunity of lifts, escalators and moving walks.
The special requirements of the product family make it necessary to define precise criteria for the evaluation
of the immunity test results.
The basic safety requirements of the equipment under control (lift, escalator or moving walk) are specified
in ISO 8100-1 and ISO 8103-1. For this reason, a performance criterion derived from the immunity levels
of IEC 61000-6-1:2016 is deemed sufficient for most functions. However, for safety circuits, where any
ma
...