EN 1113:2008
(Main)Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification
Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification
This European Standard specifies:
the dimensional, leaktightness, mechanical and hydraulic characteristics with which shower hoses shall comply;
the procedures for testing these characteristics.
This European Standard applies to shower hoses of any material used for ablutionary purposes and intended for equipping and supplementing sanitary tapware for baths and showers.
This European Standard applies to shower hoses connected downstream of the obturator of the tapware.
Hoses which are an integral part of sanitary tapware (sink and wash basin mixing valves) or hoses intended to connect sanitary tapware to the water supplies are not covered by this European Standard.
Sanitärarmaturen - Brauseschläuche für Sanitärarmaturen für Wasserversorgungssysteme vom Typ 1 und Typ 2 - Allgemeine technische Spezifikation
Diese Europäische Norm legt Folgendes fest:
- Maße und Dichtheit sowie mechanisches und hydraulisches Verhalten, die/das Brauseschläuche
aufweisen müssen;
- die Verfahren zur Prüfung auf Einhaltung dieser Anforderungen.
Die vorliegende Europäische Norm gilt unabhängig vom verwendeten Werkstoff für Brauseschläuche für die
Körperhygiene als Ausrüstung und Ergänzung von Sanitärarmaturen in Duschen und Bädern.
Diese Europäische Norm gilt für Brauseschläuche für den Anschluss nach dem Absperrorgan der Armatur.
Diese Europäische Norm deckt keine Schläuche zur Verbindung der Sanitärarmaturen mit der
Wasserversorgung und keine Schläuche ab, die integraler Bestandteil der Sanitärarmatur sind (Mischbatterien
für Spülbecken und Handwaschbecken).
Einzelheiten zu Druck und Temperatur sind in Tabelle 1 enthalten.
Robinetterie sanitaire - Flexibles de douches pour robinetterie sanitaire pour les systèmes d'alimentation en eau de types 1 et 2 - Spécifications techniques générales
La présente Norme européenne spécifie :
les caractéristiques dimensionnelles, d’étanchéité, de comportement mécanique et hydraulique auxquelles doivent répondre les flexibles de douches ;
les modes opératoires d’essai permettant de contrôler ces caractéristiques.
La présente Norme européenne s’applique aux flexibles de douches, quel que soit le matériau utilisé, destinés à équiper et à compléter les robinetteries sanitaires de baignoires ou de douches réservées pour l’hygiène corporelle.
La présente Norme européenne s’applique aux flexibles de douches connectés en aval de l’obturateur de la robinetterie.
Les flexibles destinés à raccorder les robinetteries sanitaires à l’installation, ainsi que ceux qui font partie de la robinetterie (mitigeurs pour évier et lavabo) ne sont pas couverts par la présente Norme européenne.
Les exigences relatives à la pression et à la température sont données dans le Tableau 1.
Tableau 1 - Conditions d’utilisation/classifications
Système d’alimentation en eau Domaine de fonctionnement des flexibles de douches Débits
Limites Recommandé Voir Tableau 3
Type 1 voir Figure 1 Pression dynamique
Pression dynamique (0,1 à 0,3) MPa Min. 0,42 l/s (25,2 l/min)
0,05 MPa à 0,5 MPa (1,0 à 3,0) bar à 0,3 MPa 0,02 MPa (3 0,2 bar)
0,5 bar à 5 bar
Type 2
Voir Figure 2 Pression dynamique Pression dynamique Classe E
(0,01 à 0,2) MPa (0,02 à 0,10) MPa 0,06 l/s Q 0,18 l/s (3,6 l/min Q 10,8 l/min.)
(0,1 à 2) bar (0,2 à 1,0) bar à 0,01 MPa (0,1 bar)
Classe H
0,18 l/s Q (10,8 l/min Q)
à 0,01 MPa (0,1 bar)
Température T 70 °C T 42 °C
Légende
1 Eau froide
2 Eau chaude
3 Alimentation réseau (pression d’alimentation jusqu’à 10 bar)
4 Chauffe-eau
Figure 1 - Système d’alimentation en eau de type 1, avec domaine de pression de 0,05 MPa à 1,0 MPa (0,5 bar à 10 bar)
Légende
1 Citerne de stockage d’eau froide (couvercle retiré par souci de clarté)
2 Tuyau d’alimentation en eau chaude
Sanitarne armature - Gibke cevi za sanitarne armature sistemov za oskrbo z vodo tipa 1 in tipa 2 - Splošne tehnične zahteve
General Information
- Status
- Withdrawn
- Publication Date
- 26-Feb-2008
- Withdrawal Date
- 22-Feb-2011
- Technical Committee
- CEN/TC 164 - Water supply
- Drafting Committee
- CEN/TC 164/WG 8 - Sanitary tapware
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 23-Feb-2011
- Completion Date
- 23-Feb-2011
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
- Effective Date
- 18-Dec-2010
- Effective Date
- 27-Jun-2009
Frequently Asked Questions
EN 1113:2008 is a standard published by the European Committee for Standardization (CEN). Its full title is "Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification". This standard covers: This European Standard specifies: the dimensional, leaktightness, mechanical and hydraulic characteristics with which shower hoses shall comply; the procedures for testing these characteristics. This European Standard applies to shower hoses of any material used for ablutionary purposes and intended for equipping and supplementing sanitary tapware for baths and showers. This European Standard applies to shower hoses connected downstream of the obturator of the tapware. Hoses which are an integral part of sanitary tapware (sink and wash basin mixing valves) or hoses intended to connect sanitary tapware to the water supplies are not covered by this European Standard.
This European Standard specifies: the dimensional, leaktightness, mechanical and hydraulic characteristics with which shower hoses shall comply; the procedures for testing these characteristics. This European Standard applies to shower hoses of any material used for ablutionary purposes and intended for equipping and supplementing sanitary tapware for baths and showers. This European Standard applies to shower hoses connected downstream of the obturator of the tapware. Hoses which are an integral part of sanitary tapware (sink and wash basin mixing valves) or hoses intended to connect sanitary tapware to the water supplies are not covered by this European Standard.
EN 1113:2008 is classified under the following ICS (International Classification for Standards) categories: 23.040.70 - Hoses and hose assemblies. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1113:2008 has the following relationships with other standards: It is inter standard links to EN 13905:2003, EN 1113:1997, EN 1113:2008+A1:2011, EN 1113:2008/FprA1. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1113:2008 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/EXP. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1113:2008 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sanitärarmaturen - Brauseschläuche für Sanitärarmaturen für Wasserversorgungssysteme vom Typ 1 und Typ 2 - Allgemeine technische SpezifikationRobinetterie sanitaire - Flexibles de douches pour robinetterie sanitaire pour les systemes d'alimentation type 1 et type 2 - Spécifications techniques généralesSanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification91.140.70Sanitarne napraveSanitary installations23.040.70Gumene cevi in armatureHoses and hose assembliesICS:Ta slovenski standard je istoveten z:EN 1113:2008SIST EN 1113:2009en,fr,de01-januar-2009SIST EN 1113:2009SLOVENSKI
STANDARDSIST EN 13905:2004SIST EN 1113:19971DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1113February 2008ICS 23.040.70Supersedes EN 1113:1997, EN 13905:2003
English VersionSanitary tapware - Shower hoses for sanitary tapware for watersupply systems of type 1 and type 2 - General technicalspecificationRobinetterie sanitaire - Flexibles de douches pourrobinetterie sanitaire pour les systèmes d'alimentation type1 et type 2 - Spécifications techniques généralesSanitärarmaturen - Brauseschläuche für Sanitärarmaturenfür Wasserversorgungssysteme vom Typ 1 und Typ 2 -Allgemeine technische SpezifikationThis European Standard was approved by CEN on 12 January 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1113:2008: ESIST EN 1113:2009
1 Scope This European Standard specifies: the dimensional, leaktightness, mechanical and hydraulic characteristics with which shower hoses shall comply; the procedures for testing these characteristics. This European Standard applies to shower hoses of any material used for ablutionary purposes and intended for equipping and supplementing sanitary tapware for baths and showers.
This European Standard applies to shower hoses connected downstream of the obturator of the tapware. Hoses which are an integral part of sanitary tapware (sink and wash basin mixing valves) or hoses intended to connect sanitary tapware to the water supplies are not covered by this European Standard. Details of pressures and temperatures are given in Table 1. Table 1 — Conditions of use/Classifications Operating range of shower hoses Flow rates Water Supply
system Limits Recommended See table 3 Type 1
see Figure 1 Dynamic Pressure 0,05 MPa to 0,5 MPa 0,5 bar to 5 bar
Dynamic Pressure (0,1 to 0,3) MPa (1,0 to 3,0) bar
Min. 0,42 l/s (25,2 l/min)
at 0,3 + 0,02 MPa (3 + 0,2 bar) Class E 0,06 l/s < Q < 0,18 l/s
(3,6 l/min < Q < 10,8 l/min.) at 0,01 MPa (0,1 bar) Type 2
see Figure 2 Dynamic Pressure (0,01 to 0,2) MPa (0,1 to 2) bar
Dynamic Pressure (0,02 to 0,10) MPa (0,2 to 1,0) bar
Class H 0,18 l/s ≤ Q (10,8 l/min ≤ Q) at 0,01 MPa (0,1 bar) Temperature T < 70°C
T < 42°C
Key 1 Cold water 2 Hot Water 3 Mains supply pipe (Supply pressures up to 10 bar)
4 Water heater Figure 1 — Type 1 Water supply system with a pressure range of (0,05 – 1,0) MPa (0,5 - 10) bar SIST EN 1113:2009
Key 1 Cold water storage cistern (cover omitted
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...