EN ISO 5620-1:1996

SLOVENSKI STANDARD
01-december-2000
Shipbuilding and marine structures - Filling connection for drinking water tanks -
Part 1: General requirements (ISO 5620-1:1992)
Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 1:
General requirements (ISO 5620-1:1992)
Schiffbau und Meerestechnik - Übernahme-Flanschanschluß für Trinkwassertanks - Teil
1: Allgemeine Anforderungen (ISO 5620-1:1992)
Construction navale et structures maritimes - Raccordement de remplissage des
réservoirs a eau potable - Partie 1: Exigences générales (ISO 5620-1:1992)
Ta slovenski standard je istoveten z: EN ISO 5620-1:1996
ICS:
47.020.30 Sistemi cevi Piping systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL
ISO
STANDARD
First edi tion
19924 2-01
Shipbuilding and marine structures - Fiiling
connection for drinking water tanks -
Bart 1:
General requirements
Construction navale et structures maritimes
Raccordement de
rempiissage des rhervoirs a eau potable -
Partie 1: Exigences ghkales
Reference number
ISO 56204 : 1992( E)
ISO 5620=1:1992(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an Inter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard ISO 56204 was prepared by Technical Committee
ISO/TC 8, Shipbuiiding and marine structures.
This first edition of ISO 56204 together with ISO 5620-2 cancel and re-
place the first edition of ISO 5620, of which they constitute a technical
revision.
ISO 5620 consists of the following park, under the general title
Shipbuilding and marine structures - Filling connection for drinking
water tanks:
- Part 1: General requirements
- Part 2: Components
0 ISO 1992
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
International Organkation for Standardization
Case Postale 56 0 CH-1211 Genkve 20 l Switzerland
Printed in Switzerland
ii
ISO 5620=1:1992(E)
INTERNATIONAL STANDARD
Shipbuilding and marine structures - Fiiling connection for
drinking water tanks -
Part 1:
General requirements
4 Users of ISO 5620 should note that, while observing
1 Scope
the requirements of the Standard, they should at the same
time ensure compliance with such statutary requirements,
ISO 5620 specifies the drinking water connection
rules and regulations as may apply to the individual ship
aboard ships for attachment of piping from another
concerned.
ship or from a land distribution System.
This patt of ISO 5620 specifies the general require-
ments, the composition and the designation of the
2 Normative references
complete filling connection and gives a recommen-
dation for the installation aboard ships.
The following Standards contain provisions which,
NOTES
through reference in this text, constitute provisions
of this part of ISO 5620. At the time of publication,
1 Details for the components of the filling connection are
the editions indicated were valid. All Standards are
given in ISO 5620-2, both for the distribution System and
subject to revision, and
...