EN ISO 5620-2:1996

SLOVENSKI STANDARD
01-december-2000
Shipbuilding and marine structures - Filling connection for drinking water tanks -
Part 2: Components (ISO 5620-2:1992)
Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 2:
Components (ISO 5620-2:1992)
Schiffbau und Meerestechnik - Übernahme-Flanschanschluß für Trinkwassertanks - Teil
2: Einzelteile (ISO 5620-2:1992)
Construction navale et structures maritimes - Raccordement de remplissage des
réservoirs a eau potable - Partie 2: Eléments constitutifs (ISO 5620-2:1992)
Ta slovenski standard je istoveten z: EN ISO 5620-2:1996
ICS:
47.020.30 Sistemi cevi Piping systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL ISO
STANDARD
First edi tion
19924 2-01
Shipbuilding and marine structures - Filling
connedion for drinking water tanks -
Part 2:
Components
Construction navale et structures maritimes - Raccordement de
remplissage des reservoirs A eau potable -
Partie 2: N6ments constitutifs
Reference number
ISO 5620-2: 1992(E)
ISO 5620=2:1992(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an Inter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard ISO 5620-2 was prepared by Technical Committee
ISWTC 8, Shipbuilding and marine structures.
This first edition of ISO 5620-2 together with ISO 56204 cancel and re-
place ttre first edition of ISO 5620, of which they constitute a technical
revision.
ISO 5620 consists of the following Parts, under the general title
Shipbuilding and marine structures - Filling connection for drinking
water tanks:
- Part 1: General requirements
- Part 2: Components
0 ISO 1992
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii
ISO 5620=2:1992(E)
INTERNATIONAL STANDARD
Shipbuilding and marine structures - Filling connection for
drinking water tanks -
Part 2:
Components
IEC and ISO maintain registers of currently valid In-
1 Scope
ternational Standards.
ISO 5620 specifies the drinking water connection
ISO 630:1980, Strucfural steels.
aboard ships for attachment of piping from another
ship or from a land distribution System.
ISO 683.1:1987, Heat-treatable steels, alloy steels
This part of ISO 5620 specifies the technical details and free-cutting steels - Part 1: Direct-hardening
of the components of the filling connection and lays unalloyed and Iow-alloyed wrought steel in form of
down the designation of the main components such different black produc ts.
as flanges, securing bolts and gasket.
ISO 1302:1992, Technical drawings - Method of in-
NOTE 1 Part 1 of ISO 5620 specifies the general re-
dicating surface texture.
quirements, the composition and the designation of the
complete filling connection.
ISO 2341:1986, Clevis pins with head.
ISO 4016:1988, Hexagon head bolts - Product grade
2 Normative references
C .
The following Standards contain provisions which,
ISO 4026:1977, Hexagon socket sef screws with f7at
through reference in this text, constitute provisions
of this patt of ISO 5620. At the time of publication, Point.
the editions indicated were valid. All Standards are
ISO 56204 :1992, Shipbuilding and marine sfructures
subject to revision, and Parties to agreements based
- Filiing connection for drinking water tanks -
on this patt of ISO 5620 are encouraged to investi-
Part 7: General requiremenfs.
gate the possibility of applying the most recent edi-
tions of the Standards indicated below. Members of

ISO 5620=2:1992(E)
Alternatively ship-quality steel plate grade A may
3 Supply watering flange
be used, provided that it has equivalent mechanical
and welding properties.
The s
...