EN 17928-2:2024
(Main)Gas infrastructure - Injection stations - Part 2: Specific requirements regarding the injection of biomethane
Gas infrastructure - Injection stations - Part 2: Specific requirements regarding the injection of biomethane
This document establishes specific functional requirements for injection stations for biomethane into gas transmission and distribution systems operated with gases of the second gas family in accordance with EN 437 in addition to the general functional requirements of EN 17928 1:2024.
This document represents the recommendations at the time of its preparation. This document does not apply to injection stations operating prior to the publication of this document.
This document complements EN 17928 1:2024 by specifying the technical safety requirements to be observed in respect of the chemical and physical properties of biomethane.
This document specifies common basic principles for gas infrastructure. Users of this document are expected to be aware that more detailed national standards and/or codes of practice can exist in the CEN member countries.
This document is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles.
In the event of terms of additional requirements in national legislation/regulation than in this document, CEN/TR 13737 (all parts) illustrates these terms.
CEN/TR 13737 (all parts) gives:
— legislation/regulations applicable in a member state;
— if appropriate, more restrictive national requirements;
— a national contact point for the latest information.
Gasinfrastruktur - Einspeiseanlagen - Teil 2: Spezifische Anforderungen für die Einspeisung von Biomethan
Dieses Dokument legt spezifische funktionale Anforderungen an Einspeiseanlagen für Biomethan in Gastransport- und Verteilsystemen, die mit Gasen der zweiten Gasfamilie nach EN 437 betrieben werden, zusätzlich zu den allgemeinen funktionalen Anforderungen in prEN 17928-1 fest.
Dieses Dokument enthält die Empfehlungen zum Zeitpunkt seiner Erstellung. Dieses Dokument ist nicht für vor der Veröffentlichung desselben in Betrieb genommene Einspeiseanlagen anwendbar.
Dieses Dokument ergänzt prEN 17928-1 durch die Festlegung technischer Sicherheitsanforderungen, die im Hinblick auf die chemischen und physikalischen Eigenschaften von Biomethan zu beachten sind, fest.
Dieses Dokument legt gemeinsame Grundprinzipien für die Gasinfrastruktur fest. Die Anwender dieses Dokuments sollten sich bewusst sein, dass ausführlichere nationale Normen und/oder Verfahrensregeln in den CEN-Mitgliedstaaten bestehen können.
Dieses Dokument soll in Verbindung mit diesen, die oben erwähnten allgemeinen Grundsätze darlegenden nationalen Normen und/oder Technischen Regeln angewendet werden.
Im Fall von zusätzlichen Anforderungen in nationalen gesetzlichen Vorschriften/Verordnungen zu diesem Dokument, verdeutlicht CEN/TR 13737 (alle Teile) diese Anforderungen.
CEN/TR 13737 (alle Teile) enthält:
- Gesetzliche Vorschriften/Verordnungen in einem Mitgliedsstaat;
- ggf. weitergehende strengere nationale Anforderungen;
- einen nationalen Ansprechpartner für die Weitergabe neuester Informationen.
Infrastructures gazières - Stations d'injection - Partie 2 : Exigences spécifiques concernant l'injection de biométhane
Le présent document établit des exigences fonctionnelles spécifiques pour les stations d'injection de biométhane dans les réseaux de transport et de distribution de gaz exploités avec des gaz de la deuxième famille conformément à l'EN 437, en plus des exigences fonctionnelles générales de l’EN 17928 1:2024.
Le présent document représente les recommandations en vigueur au moment de son élaboration. Le présent document ne s'applique pas aux stations d'injection en fonctionnement avant la publication du présent document.
Le présent document complète l’EN 17928 1:2024 en spécifiant les exigences techniques de sécurité à respecter en ce qui concerne les propriétés chimiques et physiques du biométhane.
Le présent document spécifie les principes de base communs pour les infrastructures gazières. Il convient que les utilisateurs du présent document gardent à l'esprit l'existence éventuelle, dans les pays membres du CEN, de codes de pratique et/ou de Normes nationales plus détaillés.
Le présent document est destiné à être appliqué conjointement avec ces normes nationales et/ou codes de pratique, qui détaillent les principes de base précités.
Si la législation/réglementation nationale contient des termes relatifs à des exigences supplémentaires, en plus de ceux du présent document, le CEN/TR 13737 (toutes les parties) illustre ces termes.
Le CEN/TR 13737 (toutes les parties) donne :
— la législation/les réglementations applicables dans un État membre ;
— si applicable, des exigences nationales plus contraignantes ;
— un point de contact national pour les informations les plus récentes.
Infrastruktura za plin - Postaje za injiciranje - 2. del: Posebne zahteve za injiciranje biometana
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 17928-2:2023
01-maj-2023
Infrastruktura za plin - Postaje za injiciranje - 2. del: Posebne zahteve za biometan
Gas infrastructure - Injection stations - Part 2: Specific requirements regarding the
injection of biomethane
Gasinfrastruktur - Einspeiseanlagen - Part 2: Spezifische Anforderungen für die
Einspeisung von Biomethan
Installation pour l'injection de gaz renouvelable dans les reseaux de gaz naturel - Partie
2: Exigences spécifiques pour biogas
Ta slovenski standard je istoveten z: prEN 17928-2
ICS:
27.190 Biološki viri in drugi Biological sources and
alternativni viri energije alternative sources of energy
75.180.01 Oprema za industrijo nafte in Equipment for petroleum and
zemeljskega plina na splošno natural gas industries in
general
oSIST prEN 17928-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 17928-2:2023
oSIST prEN 17928-2:2023
DRAFT
EUROPEAN STANDARD
prEN 17928-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2023
ICS 27.190
English Version
Gas infrastructure - Injection stations - Part 2: Specific
requirements regarding the injection of biomethane
Installation pour l'injection de gaz renouvelable dans Gasinfrastruktur - Einspeiseanlagen - Part 2:
les reseaux de gaz naturel - Partie 1: Exigences Spezifische Anforderungen für die Einspeisung von
spécifiques pour biogas Biomethan
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 234.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17928-2:2023 E
worldwide for CEN national Members.
oSIST prEN 17928-2:2023
prEN 17928-2:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 General requirements . 4
5 Operational functions . 4
6 Overall safety requirements and protection against inadmissible operating modes . 5
6.1 Protection against inadmissible underpressure . 5
7 Requirements on stations, components and assemblies . 5
7.1 Inadmissible gas composition from the upgrading station . 5
7.2 Check of biomethane quality. 5
7.2.1 General . 5
7.2.2 Specific parameters . 5
7.3 Odorization . 6
Bibliography . 7
oSIST prEN 17928-2:2023
prEN 17928-2:2023 (E)
European foreword
This document (prEN 17928-2:2023) has been prepared by Technical Committee CEN/TC 234 “Gas
infrastructure”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document is intended to be used in conjunction with prEN 17928-1.
This document is part of the prEN 17928 series, Gas infrastructure - Injection stations:
— Part 1: General requirements
— Part 2: Specific requirements regarding the injection of biomethane
— Part 3: Specific requirements regarding the injection of hydrogen fuel gas
oSIST prEN 17928-2:2023
prEN 17928-2:2023 (E)
1 Scope
This document establishes specific functional requirements for injection stations for biomethane into gas
transmission and distribution systems operated with gases of the second gas family in accordance with
EN 437 in addition to the general functional requirements of prEN 17928-1.
This document rep
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.