iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12306:1997

(Main)

Biotechnology - Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination

Biotechnology - Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination

This European Standard provides guidance for a quality control procedure of a diagnostic kit to assure that the assay results will fulfil the intended purpose of the test by both manufacturers and users. This European Standard applies to diagnostic kits used in agriculture, plant and animal pest and disease control monitoring of feed and environmental contamination due to microorganisms.

Biotechnik - Leitfaden zur Qualitätsüberwachung von Diagnostikpackungen zur Verwendung in der Landwirtschaft, bei der Schädlingsbekämpfung, Bekämpfung von Krankheiten bei Pflanzen und Tieren sowie bei Kontaminationen der Umwelt

Diese Europäische Norm stellt Anleitungen für die Durchführung der Qualitätsüberwachung von Diagnostikpackungen auf, um sicherzustellen, daß die Analysenergebnisse den von den Herstellern und Anwendern vorgesehenen Zweck der Prüfung erfüllen. Diese Europäische Norm gilt für Diagnostikpackungen, die in der Landwirtschaft zur Überwachung von Schädlingen und Krankheiten von Pflanzen und Tieren, zur Überwachung von Futtermitteln sowie zur Überwachung der durch Mikroorganismen verursachten Kontaminationen der Umwelt verwendet werden.

Biotechnologie - Guide pour le contrôle de qualité des trousses de diagnostic utilisées en agriculture pour la surveillance des maladies et des agents nuisibles pour les plantes et les animaux et des contaminations environnementales

La présente norme présente un guide pour une procédure de contrôle de la qualité d'une trousse de diagnostic permettant aux fabricants comme aux utilisateurs de garantir que les résultats d'essai correspondent bien à l'objectif attendu. La présente norme européenne s'applique aux trousses de diagnostic utilisées en agriculture, pour la surveillance des maladies et des agents nuisibles pour les plantes et les animaux, le contrôle de l'alimentation animale et de la contamination environnementale dues à des microorganismes.

Biotehnologija - Navodilo za kontrolo kakovosti diagnostičnih kompletov, ki se uporabljajo v kmetijstvu, kontrola rastlinskih in živalskih škodljivcev, kontrola obolenj in onesnaževanja okolja

General Information

Status
Published
Publication Date
21-Oct-1997
ICS
07.080 - Biology. Botany. Zoology
07.100.99 - Other standards related to microbiology
Technical Committee
CEN/TC 233 - Biotechnology
Drafting Committee
CEN/TC 233/WG 3 - Agricultural environmental applications
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
11-Apr-2022
Directive
90/219/EEC - Contained use of genetically modified micro-organisms
90/220/EEC - Deliberate release into the environment of genetically modified organisms
90/679/EEC - Protection of workers from risks related to exposure to biological agents at work
Mandate
M/BC/CEN/91/19 - Mandate for CEN on biotechnology
Ref Project
SIST EN 12306:1999 - Biotechnology - Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination

Buy Standard

EN 12306:1999EN 12306:1999
PreviousNext
Standard
EN 12306:1999
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Biotechnik - Leitfaden zur Qualitätsüberwachung von Diagnostikpackungen zur Verwendung in der Landwirtschaft, bei der Schädlingsbekämpfung, Bekämpfung von Krankheiten bei Pflanzen und Tieren sowie bei Kontaminationen der UmweltBiotechnologie - Guide pour le contrôle de qualité des trousses de diagnostic utilisées en agriculture pour la surveillance des maladies et des agents nuisibles pour les plantes et les animaux et des contaminations environnementalesBiotechnology - Guidance for quality control of diag
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12347:1998(Main)
Biotechnology - Performance criteria for steam sterilizers and autoclaves
SIST EN 12347:1999

This European Standard specifies performance criteria for steam sterilizer and autoclave used for the destruction and prevention of release of microorganisms used in biotechnological processes. This European Standard applies if the intended use of steam sterilizers or autoclaves includes hazardous or potentially hazardous microorganisms used in biotechological processes or if exposure of the worker or the environment to such microorganisms is restricted for reasons of safety.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12307:1997(Main)
Biotechnology - Large-scale process and production - Guidance for good practice, procedures, training and control for personnel
SIST EN 12307:1999

This European Standard gives guidance for good practice, procedures, training and control for the operation of large scale biotechnological processes. In addition, this European Standard gives recommendations for education and training of personnel involved in the large scale handling of microorganisms in plant building of containment levels 1, 2, 3 and 4. This European Standard aims at the protection of the workers from biological hazards as well as the environment including plants and animals.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12347:1998(Main)
Biotechnology - Performance criteria for steam sterilizers and autoclaves
SIST EN 12347:1999

This European Standard specifies performance criteria for steam sterilizer and autoclave used for the destruction and prevention of release of microorganisms used in biotechnological processes. This European Standard applies if the intended use of steam sterilizers or autoclaves includes hazardous or potentially hazardous microorganisms used in biotechological processes or if exposure of the worker or the environment to such microorganisms is restricted for reasons of safety.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12307:1997(Main)
Biotechnology - Large-scale process and production - Guidance for good practice, procedures, training and control for personnel
SIST EN 12307:1999

This European Standard gives guidance for good practice, procedures, training and control for the operation of large scale biotechnological processes. In addition, this European Standard gives recommendations for education and training of personnel involved in the large scale handling of microorganisms in plant building of containment levels 1, 2, 3 and 4. This European Standard aims at the protection of the workers from biological hazards as well as the environment including plants and animals.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3379:2024(Main)
Leather - Determination of distension and strength of surface (Ball burst method) (ISO 3379:2024)
SIST EN ISO 3379:2025

This document specifies a test method for the determination of distension and strength of the leather grain or finished surface. This method is applicable to all flexible leathers and it is particularly suitable to determine the lastability of leathers for footwear uppers.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12007-5:2024(Main)
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements
SIST EN 12007-5:2025

This document describes the specific functional requirements for the transportation of gases (gaseous energy carriers) through service lines in addition to the general functional requirements of EN 12007 1 for:
a)   a maximum operating pressure (MOP) up to and including 16 bar;
b)   an operating temperature between −20 °C and +40 °C;
c)   gases and blends of gases which are in the gaseous state when conveyed in the gas pipeline infrastructure such as hydrogen, hydrogen rich, and methane rich gases, dimethyl ether (DME) and propane and butanes used for combustion and/or as feedstock, excluding steam and compressed air, where technical evaluation has ensured that operating conditions, constituents and properties of the gas do not affect the safe operation and maintenance of the service line.
It applies to their design, construction, commissioning, decommissioning, operation, maintenance, extension and other associated works including safety and environmental aspects. The service line is the physical asset comprising of pipework from the gas main branch saddle or top tee to the outlet of the distribution system operator’s nominated point(s) of delivery (for example: isolation valve, regulator, meter connection or combination of regulator and isolation valve).
This document does not apply retrospectively to installations before the publication date unless specifically stated.
Specific functional requirements for:
—   polyethylene pipelines are given in EN 12007 2;
—   steel pipelines are given in EN 12007 3;
—   polyamide (PA-U) pipelines are given in CEN/TS 12007 6;
—   pipework for buildings are given in EN 1775;
—   pressure regulating installations are given in EN 12279 or EN 12186;
—   pressure testing, commissioning and decommissioning are given in EN 12327;
—   safety management system (SMS) and pipeline integrity management system (PIMS) are given in EN 17649.
This document specifies common basic principles for gas infrastructure. Users of this document are expected to be aware that there can exist more detailed national standards and/or codes of practice in the CEN member countries. This document is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles.
In the event of terms of additional requirements in legislation/regulation than in this document, CEN/TR 13737 (all parts) illustrates these terms.
CEN/TR 13737 gives:
—   description of legislations/regulations applicable in a member state;
—   if appropriate, more restrictive national requirements;
—   a national contact point for the latest information.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 18003:2024(Main)
Food authenticity - Determination of 16-O-Methylcafestol content of green and roasted coffee - HPLC-method
SIST EN 18003:2025

This document specifies a high-performance liquid chromatography (HPLC) method for determining the 16-O-Methylcafestol content in green and roasted coffee.
The method is suitable for a content of 40 mg/kg to 1 600 mg/kg of 16-O-Methylcafestol of green and roasted coffee, respectively. The collaborative study has shown that mass fractions also between 20 mg/kg to 40 mg/kg can be successfully analysed depending on the laboratory equipment.
The compliance assessment process is not part of this document.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17972:2024(Main)
Food authenticity - Food authenticity and fraud - Concepts, terms and definitions
SIST EN 17972:2025

This document provides technical definitions of terms relating to authenticity and fraud when referring to food products. All terms and definitions are in the context of food supply chains, but most of them can also be applied when referring to feed products and the feed supply chain.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16214-3:2024(Main)
Sustainability and greenhouse gas emission saving criteria for biomass for energy applications - Principles, criteria, indicators and verifiers - Part 3: Sustainability criteria related to environmental aspects
kSIST FprEN 16214-3:2023

This document specifies procedures, criteria and indicators meeting the sustainability criteria of European Commission Directive 2018/EU/2001 (RED II), the recast of the Renewable Energy Directive, for agricultural biomass and forest biomass for energy applications, i.e. biofuels, bioliquids and biomass fuels. This document is applicable to production, cultivation and harvesting of biomass from agricultural land and forest land for biofuels, bioliquids and biomass fuel production.

  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17137:2024(Main)
Textiles and textile products - Determination of the content of compounds based on chlorobenzenes and chlorotoluenes
SIST EN 17137:2024

This document specifies a test method using gas chromatography with mass selective detector (GC-MS) for detection and quantification of chlorobenzenes, chlorotoluenes, and α-chlorinated toluenes in fibres, yarns, fabrics, coated fabrics and plastics.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day