EN 10246-12:2000
(Main)Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
This Part of EN 10246 specifies the requirements and the acceptance levels for magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections. This Part of EN 10246 is to be used for the detection of surface imperfections on the entire or any part of the outer surface of tubes, excluding the end bevel/face. In addition, this standard may be used, as appropriate, to locate the position of external surface imperfections, detected by another non destructive testing method, ...
Zerstörungsfreie Prüfung von Stahlrohren - Teil 12: Magnetpulverprüfung nahtloser und geschweißter ferromagnetischer Stahlrohre zum Nachweis von Oberflächenfehlern
Dieser Teil der EN 10246 legt die Anforderungen und die Zulässigkeitsklassen für die Magnetpulverprüfung nahtloser und geschweißter ferromagnetischer Stahlrohre zum Nachweis von Oberflächenfehlern fest. Dieser Teil der EN 10246 ist anwendbar, um Oberflächenunregelmäßigkeiten auf der äußeren Rohroberflächein Teilbereichen oder auf der gesamten Oberfläche, mit Ausnahme der Stirnfläc hen/Stirnflächenanschrägung, nachzuweisen.
Essais non destructifs sur des tubes en acier - Partie 12: Contrôle par magnétoscopie des tubes en acier ferromagnétiques sans soudure et soudés pour la détection des imperfections de surface
La présente partie de l'EN 10246 spécifie les prescriptions relatives au contrôle magnétoscopique du corps des tubes en acier ferromagnétiques sans soudure et soudés pour la détection d'imperfections de surface. La présente partie de la norme européenne doit être utilisée pour la détection des imperfections de surface, sur tout ou partie de la surface des tubes, à l'exception des extrémités coupées d'équerre ou chanfreinées.
Neporušitveno preskušanje jeklenih cevi - 12. del: Ugotavljanje površinskih napak nevarjenih in varjenih feromagnetnih jeklenih cevi z magnetnimi delci
General Information
- Status
- Withdrawn
- Publication Date
- 15-Feb-2000
- Withdrawal Date
- 31-Mar-2011
- Technical Committee
- ECISS/TC 110 - Steel tubes, and iron and steel fittings
- Drafting Committee
- ECISS/TC 29/SC 10 - Non-destructive testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Apr-2011
- Completion Date
- 01-Apr-2011
Relations
- Effective Date
- 09-Apr-2011
Frequently Asked Questions
EN 10246-12:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections". This standard covers: This Part of EN 10246 specifies the requirements and the acceptance levels for magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections. This Part of EN 10246 is to be used for the detection of surface imperfections on the entire or any part of the outer surface of tubes, excluding the end bevel/face. In addition, this standard may be used, as appropriate, to locate the position of external surface imperfections, detected by another non destructive testing method, ...
This Part of EN 10246 specifies the requirements and the acceptance levels for magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections. This Part of EN 10246 is to be used for the detection of surface imperfections on the entire or any part of the outer surface of tubes, excluding the end bevel/face. In addition, this standard may be used, as appropriate, to locate the position of external surface imperfections, detected by another non destructive testing method, ...
EN 10246-12:2000 is classified under the following ICS (International Classification for Standards) categories: 23.040.10 - Iron and steel pipes; 77.040.20 - Non-destructive testing of metals. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10246-12:2000 has the following relationships with other standards: It is inter standard links to EN ISO 10893-5:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10246-12:2000 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/005, M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10246-12:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Neporušitveno preskušanje jeklenih cevi - 12. del: Ugotavljanje površinskih napak nevarjenih in varjenih feromagnetnih jeklenih cevi z magnetnimi delciZerstörungsfreie Prüfung von Stahlrohren - Teil 12: Magnetpulverprüfung nahtloser und geschweißter ferromagnetischer Stahlrohre zum Nachweis von OberflächenfehlernEssais non destructifs sur des tubes en acier - Partie 12: Contrôle par magnétoscopie des tubes en acier ferromagnétiques sans soudure et soudés pour la détection des imperfections de surfaceNon-destructive testing of steel tubes - Part 12: Magnetic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...