FprEN 16854

SLOVENSKI STANDARD
oSIST prEN 16854:2015
01-junij-2015
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije -
Ugotavljanje požarne odpornosti saj toplotnoizolacijskih proizvodov za dimnike
Thermal insulation products for building equipment and industrial installations -
Determination of soot fire resistance of thermal insulation products for the use in
chimneys
Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische
Anlagen in der Industrie - Bestimmung der Rußbrandbeständigkeit von
Wärmedämmstoffen bei der Verwendung in Abgasanlagen
Produits isolants thermiques pour l'équipement du bâtiment et les installations
industrielles - Détermination de la résistance au feu de cheminée des produits isolants
thermiques destinés à être utilisés dans des conduits de fumée
Ta slovenski standard je istoveten z: prEN 16854
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.060.40 Dimniki, jaški, kanali Chimneys, shafts, ducts
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
oSIST prEN 16854:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 16854:2015
oSIST prEN 16854:2015
EUROPEAN STANDARD
DRAFT
prEN 16854
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2015
ICS 91.060.40; 91.100.60
English Version
Thermal insulation products for building equipment and industrial
installations - Determination of soot fire resistance of thermal
insulation products for the use in chimneys
Wärmedämmstoffe für die technische Gebäudeausrüstung
und für betriebstechnische Anlagen in der Industrie -
Bestimmung der Rußbrandbeständigkeit von
Wärmedämmstoffen bei der Verwendung in Abgasanlagen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 88.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16854:2015 E
worldwide for CEN national Members.

oSIST prEN 16854:2015
prEN 16854:2015 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Principle .5
5 Apparatus .5
6 Test specimens .7
7 Procedure .9
8 Calculation and expression of results .9
9 Accuracy of measurement . 10
10 Test report . 10
Bibliography . 11

oSIST prEN 16854:2015
prEN 16854:2015 (E)
Foreword
This document (prEN 16854:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal
insulating materials and products”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This European Standard is one of a series of standards that specify test methods for determining dimensions
and properties of thermal insulating materials and products. It supports a series of product standards for
thermal insulating materials and products that derive from the Council Directive of 21 December 1988 on the
approximation of laws, regulations and administrative provisions of the Member States relating to construction
products (Directive 89/106/EEC) through the consideration of the essential requirements.
oSIST prEN 16854:2015
prEN 16854:2015 (E)
Introduction
This European Standard has been prepared for products used to insulate building equipment and industrial
installations, but it may also be applied to products used in other areas.
oSIST prEN 16854:2015
prEN 16854:2015 (E)
1 Scope
This European Standard applies to thermal insulation products for use in chimneys. It describes the durability
test against soot fire.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 590, Automotive fuels - Diesel - Requirements and test methods
EN 1443, Chimneys - General requirements
EN 1856-1, Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 13063-1, Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test
methods for sootfire resistance
EN 13063-2, Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test
methods under wet conditions
EN 13063-3, Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test
methods for air flue system chimneys
3 Terms and definitions
For the purposes of this document, the terms and definitions used in EN 1443, EN 1856-1 and EN 13063-1,
EN 13063-2 and EN 13063-3 apply.
4 P
...