EN 12329:2000
(Main)Corrosion protection of metals - Electrodeposited coatings of zinc with supplementary treatment on iron or steel
Corrosion protection of metals - Electrodeposited coatings of zinc with supplementary treatment on iron or steel
This European Standard specifies requirements for electrodeposited coatings of zinc on iron or steel with supplementary treatment. This European Standard does not specify chromate finishes which are required only for improving the adhesion of paints or varnishes. NOTE: This European Standard is not intended to be usedalone, but is the complement of EN 1403. It is necessary for the purchaser to specify the zinc electrodeposited coating in accordance with the designation as specified in EN 1403.
Korrosionsschutz von Metallen - Galvanische Zinküberzüge auf Eisenwerkstoffen mit zusätzlicher Behandlung
Diese Europäische Norm legt Anforderungen an galvanisch abgeschiedene Zink- überzüge auf Eisenwerkstoffen mit zusätzlicher Behandlung fest. Diese Europäische Norm legt keine Chromatierüberzüge fest, die nur zur Verbesserung des Haftvermögens von Farben und Lacken bestimmt sind. ANMERKUNG: Diese Europäische Norm darf nicht für sich allein benutzt werden, denn sie ist die Ergänzung zu EN 1403. Der Abnehmer muß den galvanisch abzuscheidenden Zink- überzug gemäß der Bezeichnung bestellen, die in EN 1403 festgelegt ist.
Protection contre la corrosion des métaux - Revêtements électrolytiques de zinc avec traitement complémentaire sur fer ou acier
La présente norme européenne spécifie les exigences concernant les dépôts électrolytiques de zinc sur fer ou acier avec traitement complémentaire. La présente norme européenne ne spécifie pas les finitions chromatées nécessaires uniquement pour améliorer l'adhésion des peintures et vernis. NOTE: La présente norme européenne n'est pas destinée à être utilisée à part, il s'agit d'un complément à l'EN 1403. Il est essentiel que le client spécifie les dépôts électrolytiques de zinc conformément à la désignation spécifiée dans l'EN 1403.
Antikorozijska zaščita kovin - Galvanske prevleke cinka z dodatno obdelavo na železu ali jeklu
General Information
- Status
- Withdrawn
- Publication Date
- 21-Mar-2000
- Withdrawal Date
- 14-Dec-2008
- Technical Committee
- CEN/TC 262 - Metallic and other inorganic coatings
- Drafting Committee
- CEN/TC 262/WG 4 - Electroplated and autocatalytic coatings
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-Dec-2008
- Completion Date
- 15-Dec-2008
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN 12329:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Corrosion protection of metals - Electrodeposited coatings of zinc with supplementary treatment on iron or steel". This standard covers: This European Standard specifies requirements for electrodeposited coatings of zinc on iron or steel with supplementary treatment. This European Standard does not specify chromate finishes which are required only for improving the adhesion of paints or varnishes. NOTE: This European Standard is not intended to be usedalone, but is the complement of EN 1403. It is necessary for the purchaser to specify the zinc electrodeposited coating in accordance with the designation as specified in EN 1403.
This European Standard specifies requirements for electrodeposited coatings of zinc on iron or steel with supplementary treatment. This European Standard does not specify chromate finishes which are required only for improving the adhesion of paints or varnishes. NOTE: This European Standard is not intended to be usedalone, but is the complement of EN 1403. It is necessary for the purchaser to specify the zinc electrodeposited coating in accordance with the designation as specified in EN 1403.
EN 12329:2000 is classified under the following ICS (International Classification for Standards) categories: 25.220.40 - Metallic coatings. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12329:2000 has the following relationships with other standards: It is inter standard links to EN ISO 2081:2008; is excused to EN 12540:2000, EN 12330:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12329:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...