EN 13087-7:2000
(Main)Protective helmets - Test methods - Part 7: Flame resistance
Protective helmets - Test methods - Part 7: Flame resistance
This European Standard describes methods of test for protective helmets. The purpose of these tests is to enable assessment of the performance of the helmet as specified in the appropriate helmet standard. This Part specifies the methods of test for flame resistance.
Schutzhelme - Prüfverfahren - Teil 7: Flammenbeständigkeit
Diese Europäische Norm beschreibt Prüfverfahren für Schutzhelme. Mit diesen Prüfungen wird eine Bewertung der Leistungsfähigkeit von Helmen möglich, die in der entsprechenden Norm für Helme festgelegt ist. Dieser Teil legt das Prüfverfahren für die Flammenbeständigkeit fest.
Casques de protection - Méthodes d'essai - Partie 7: Résistance à la flamme
La présente Norme européenne décrit des méthodes d'essai pour les casques de protection. Ces essais sont destinés à permettre l'évaluation de la performance du casque spécifiée dans la norme de casque correspondante. La présente partie de l'EN 13087 spécifie la méthode d'essai pour la résistance à la flamme.
Varovalne čelade - Preskusne metode - 7. del: Odpornost proti plamenu
General Information
- Status
- Published
- Publication Date
- 20-Jun-2000
- Technical Committee
- CEN/TC 158 - Head protection
- Drafting Committee
- CEN/TC 158/WG 11 - Headforms and test methods
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 25-May-2021
- Completion Date
- 14-Apr-2025
Relations
- Effective Date
- 22-Dec-2008
Overview
EN 13087-7:2000 is a European CEN standard that defines test methods for flame resistance of protective helmets. As Part 7 of the EN 13087 test-method series, its purpose is to provide standardized procedures to assess the ignitability and burning behaviour of helmet materials and assemblies. The standard is used to verify a helmet’s performance against the flame-resistance requirements specified in the relevant helmet performance standards.
Key topics and requirements
- Scope and objective: Clarifies that the document focuses specifically on flame-resistance test methods for head protective equipment rather than on performance limits themselves.
- Test methods: Specifies standardized procedures for assessing ignitability and burning behaviour of helmet components and finished helmets so that results are comparable across laboratories and manufacturers.
- Specimen preparation and conditioning: Outlines the need to prepare, condition and handle helmet materials and whole helmets in a consistent manner prior to testing to ensure reproducible results.
- Measurement and observation: Defines the observations and measurements to be recorded during flame exposure (for example, ignition, sustained burning, afterglow), enabling objective assessment against the applicable helmet standard.
- Reporting: Describes information that must be included in test reports so that manufacturers, certifiers and purchasers can interpret results reliably.
(Note: EN 13087-7:2000 defines methods of test; specific pass/fail criteria are set in the applicable helmet performance standards.)
Applications and users
This standard is relevant to:
- Helmet manufacturers developing or validating materials and finished helmets for environments where flame resistance is required.
- Independent testing laboratories performing standardized flame-resistance tests and issuing test reports or certificates.
- Certification and conformity assessment bodies assessing compliance with helmet performance standards that reference flame-resistance methods.
- Specifiers and procurement teams in industries such as firefighting, petrochemical, electrical utilities, and industrial safety who require verified flame-resistant head protection.
- R&D and quality assurance teams evaluating material selection and product safety during design and production.
Related standards
- Other parts of the EN 13087 test-method series (for additional mechanical, thermal or environmental tests).
- Applicable helmet performance standards that reference flame-resistance methods (these set the acceptance criteria based on EN 13087-7).
- Broader EN standards for head protective equipment and national adoptions (e.g., the standard is adopted as SIST EN 13087-7:2001 in Slovenia).
Keywords: EN 13087-7:2000, protective helmets, flame resistance, test methods, CEN, head protective equipment, ignitability, burning behaviour, helmet standards, conformity assessment.
Frequently Asked Questions
EN 13087-7:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Protective helmets - Test methods - Part 7: Flame resistance". This standard covers: This European Standard describes methods of test for protective helmets. The purpose of these tests is to enable assessment of the performance of the helmet as specified in the appropriate helmet standard. This Part specifies the methods of test for flame resistance.
This European Standard describes methods of test for protective helmets. The purpose of these tests is to enable assessment of the performance of the helmet as specified in the appropriate helmet standard. This Part specifies the methods of test for flame resistance.
EN 13087-7:2000 is classified under the following ICS (International Classification for Standards) categories: 13.220.40 - Ignitability and burning behaviour of materials and products; 13.340.20 - Head protective equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13087-7:2000 has the following relationships with other standards: It is inter standard links to EN 13087-7:2000/A1:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13087-7:2000 is associated with the following European legislation: EU Directives/Regulations: 2016/425, 89/686/EEC; Standardization Mandates: M/031. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 13087-7:2000 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2001
9DURYDOQHþHODGH3UHVNXVQHPHWRGHGHO 2GSRUQRVWSURWLSODPHQX
Protective helmets - Test methods - Part 7: Flame resistance
Schutzhelme - Prüfverfahren - Teil 7: Flammenbeständigkeit
Casques de protection - Méthodes d'essai - Partie 7: Résistance a la flamme
Ta slovenski standard je istoveten z: EN 13087-7:2000
ICS:
13.22
...
EN 13087-7:2000は、保護ヘルメットの試験方法に関するヨーロッパ標準であり、その特に火炎耐性に焦点を当てています。この標準のスコープは、適切なヘルメット標準に従ったヘルメットの性能を評価するための試験方法を記述することにあります。具体的には、試験が行われることで、ヘルメットが炎に対してどの程度の耐性を持っているかを明らかにします。 この標準の強みは、保護ヘルメットの安全性を確保するための具体的かつ実用的な評価手法を提供している点です。火災現場など危険な環境で使用されることを考慮し、ヘルメットの火炎に対する反応を詳細にテストすることができるため、使用者の安全を確保する上で不可欠な基準となっています。 さらに、EN 13087-7:2000は、業界全体での一貫した評価基準を提供するため、製造者にとっても重要です。これにより、異なるメーカーの製品間での比較が容易になり、消費者は信頼できる製品を選ぶ助けとなります。 標準の関連性は、労働安全や公衆の安全を重視する現代社会においてますます高まっています。火炎耐性を含む保護機能は、特に消防士や特殊部隊、危険物作業者にとって必須の要件です。そのため、EN 13087-7:2000は、保護ヘルメットの品質向上に寄与し続ける重要な基準です。
SIST EN 13087-7:2001 표준은 보호 헬멧의 화염 저항에 대한 시험 방법을 규정하고 있습니다. 이 표준은 보호 헬멧의 성능을 평가하기 위한 시험 방법을 설명하며, 헬멧의 안전성을 보장하는 데 필수적인 역할을 합니다. EN 13087-7:2000의 주요 강점 중 하나는 헬멧의 화염 저항성을 체계적으로 평가할 수 있는 명확한 테스트 프로토콜을 제공한다는 점입니다. 이 표준은 헬멧 제작사 및 사용자가 필요로 하는 안전 기준을 준수할 수 있도록 돕는 동시에, 헬멧의 내구성과 화염에 대한 저항력을 과학적으로 입증할 수 있는 근거를 마련합니다. 또한, 이 표준의 적용 범위는 산업별 및 환경별 다양한 요구를 충족시키며, 제정된 절차를 통해 전 세계적으로 일관된 품질 및 안전성을 보장합니다. SIST EN 13087-7:2001 표준은 특히 화염 위험이 있는 산업 분야에서 작업하는 근로자에게 필수적이며, 이 표준을 통해 헬멧의 성능을 평가하고 개선할 수 있는 기준을 마련할 수 있습니다. 이는 사용자의 안전과 직결되는 문제이기 때문에, 해당 표준의 채택과 준수를 통해 더욱 안전한 작업환경을 조성할 수 있음을 강조합니다.
The EN 13087-7:2000 standard, titled "Protective helmets - Test methods - Part 7: Flame resistance," provides essential guidelines for assessing the flame resistance of protective helmets. The standard's scope is crucial as it details specific test methods to evaluate how well helmets can withstand exposure to flames, thereby ensuring that they meet the safety requirements necessary for various applications. One of the strengths of this standard is its comprehensive approach to testing, which emphasizes not only the performance of the helmets under flame conditions but also their compliance with broader safety protocols. By defining clear and measurable criteria for flame resistance, this standard enhances the reliability of helmet performance assessments. It aids manufacturers in developing helmets that offer better protection against fire hazards, ultimately contributing to the safety of users in high-risk environments. The relevance of EN 13087-7:2000 cannot be overstated, especially in industries where workers are exposed to extreme heat or fire, such as firefighting, welding, and industrial applications. The standard ensures that protective helmets not only provide physical protection but also resist flaming hazards, thereby reducing the risk of injury. Overall, the EN 13087-7:2000 standard is a vital document for manufacturers, regulatory bodies, and safety professionals. Its focus on flame resistance testing aligns with contemporary safety concerns and regulations, making it an indispensable resource for ensuring the performance and reliability of protective helmets in critical situations.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...