EN 10218-1:1994
(Main)Steel wire and wire products - General - Part 1: Test methods
Steel wire and wire products - General - Part 1: Test methods
This part of EN 10218 specifies the methods for the general testing of steel wire and wire products and which have been cold worked, annealed and/or coated and are of constant cross section, either round, or special section. It includes tensile testing, torsion testing, reverse bend testing, wrapping test, bend test, reverse torsion test, compression test, deep etch test, hardness test, quench hardenability test, fatigue test, wire cast measuremnet, artificial ageing, decarburization test, non-destructive tests, grain size tests, segregation test, non-metallic inclusion test and chemical analysis.
Stahldraht und Drahterzeugnisse - Allgemeines - Teil 1: Prüfverfahren
Dieser Teil der EN 10218 legt die Verfahren fest für die allgemeine Prüfung von Stahldraht und Drahterzeugnissen, die kalt umgeformt, geglüht und/oder umhüllt sind und einen gleichbleibenden Querschnitt entweder runder oder spezieller Form aufweisen. Er gilt für den Zugversuch, den Verwindeversuch, den Hin- und Herbiegeveruch, den Wickelversuch, den Biegeversuch, den Wechselverwindeversuch, den Stauchversuch, den Tiefätzversuch, die Härteprüfung, die Abschreckhärtbarkeitsprüfung,, den Dauerschwingversuch, Messung des Drahtschlages und der Richtung, die künstliche Alterung...
Fils et produits tréfilés en acier - Généralités - Partie 1: Méthodes d'essai
La présente partie de la norme EN 10218 spécifie des méthodes générales d'essai des fils et produits tréfilés en acier écrouis, recuits et/ou revêtus. Elle concerne les essais de traction, de torsion simple, de pliage alterné, d'enroulement, de pliage simple, de torsion alternée, de compression, d'attaque chimique profonde, de dureté, de trempabilité, de fatigue, de mesure des plés de tréfilage, de décarburation, de contrôle non destructif, de mesure de la grosseur de grain, de ségrégation, de détermination de la teneur en inclusions non métalliques et d'analyse chimique et le vieillissement artificiel.
Jeklena žica in žični izdelki - Splošno - 1. del: Preskusne metode
General Information
- Status
- Withdrawn
- Publication Date
- 14-Mar-1994
- Withdrawal Date
- 10-Jan-2012
- Technical Committee
- ECISS/TC 106 - Wire rod and wires
- Drafting Committee
- ECISS/TC 30 - Steel wires
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 11-Jan-2012
- Completion Date
- 11-Jan-2012
Relations
- Effective Date
- 18-Jan-2012
Frequently Asked Questions
EN 10218-1:1994 is a standard published by the European Committee for Standardization (CEN). Its full title is "Steel wire and wire products - General - Part 1: Test methods". This standard covers: This part of EN 10218 specifies the methods for the general testing of steel wire and wire products and which have been cold worked, annealed and/or coated and are of constant cross section, either round, or special section. It includes tensile testing, torsion testing, reverse bend testing, wrapping test, bend test, reverse torsion test, compression test, deep etch test, hardness test, quench hardenability test, fatigue test, wire cast measuremnet, artificial ageing, decarburization test, non-destructive tests, grain size tests, segregation test, non-metallic inclusion test and chemical analysis.
This part of EN 10218 specifies the methods for the general testing of steel wire and wire products and which have been cold worked, annealed and/or coated and are of constant cross section, either round, or special section. It includes tensile testing, torsion testing, reverse bend testing, wrapping test, bend test, reverse torsion test, compression test, deep etch test, hardness test, quench hardenability test, fatigue test, wire cast measuremnet, artificial ageing, decarburization test, non-destructive tests, grain size tests, segregation test, non-metallic inclusion test and chemical analysis.
EN 10218-1:1994 is classified under the following ICS (International Classification for Standards) categories: 77.140.65 - Steel wire, wire ropes and link chains. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10218-1:1994 has the following relationships with other standards: It is inter standard links to EN 10218-1:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10218-1:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HStahldraht und Drahterzeugnisse - Allgemeines - Teil 1: PrüfverfahrenFils et produits tréfilés en acier - Généralités - Partie 1: Méthodes d'essaiSteel wire and wire products - General - Part 1: Test methods77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chainsICS:Ta slovenski standard je istoveten z:EN 10
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...