EN 10246-4:1999
(Main)Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections
Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections
This Part of EN 10246 specifies the requirements for automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections. The standard specifies acceptance levels, calibration procedures and gives guidance on the limitations of the tests. This Part of EN 10246 is applicable to the inspection of tubes with an outside diameter equal to or greater than 10 mm.
Zerstörungsfreie Prüfung von Stahlrohren - Teil 4: Automatische Magnetfeldsonden-Streuflußprüfung nahtloser ferromagnetischer Stahlrohre über den gesamten Rohrumfang zum Nachweis von Querfehlern
Dieser Teil der EN 10246 legt die Anforderungen an die automatische Magnetfeldsonden-Streuflußprüfung nahtloser ferromagnetischer Stahlrohre über den gesamten Rohrumfang zum Nachweis von Querfehlern fest. Die Norm enthält Festlegungen über Zulässigkeitsklassen und die Einstellung der Prüfanlagen sowie Hinweise zu den Grenzen des Prüfverfahrens. Dieser Teil der EN 10246 ist für die Prüfung von Rohren mit einem Außendurchmesser ab 10 mm anwendbar.
Essais non destructifs des tubes en acier - Partie 4: Contrôle automatique par flux de fuite à l'aide de palpeurs magnétiques sur toute la circonférence des tubes pour la détection des imperfections transversales des tubes en aciers ferromagnétiques sans soudure
La présente partie de l'EN 10246 spécifie les prescriptions relatives au contrôle automatique sur toute la circonférence des tubes en aciers ferromagnétiques sans soudure, par flux de fuite à l'aide de palpeurs magnétiques pour la détection d'imperfections transversales. La norme spécifie des niveaux de sévérité, des procédures d'étalonnage et donne des informations sur les limitations de cet essai. La norme spécifie des niveaux de sévérité, des procédures d'étalonnage et donne des informations sur les limitations de cet essai.
Neporušitveno preskušanje jeklenih cevi - 4. del: Ugotavljanje prečnih napak po celotnem obodu nevarjenih feromagnetnih cevi z avtomatsko preiskavo z magnetno sondo
General Information
- Status
- Withdrawn
- Publication Date
- 16-Nov-1999
- Withdrawal Date
- 31-Mar-2011
- Technical Committee
- ECISS/TC 110 - Steel tubes, and iron and steel fittings
- Drafting Committee
- ECISS/TC 29/SC 10 - Non-destructive testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Apr-2011
- Completion Date
- 01-Apr-2011
Relations
- Effective Date
- 09-Apr-2011
Frequently Asked Questions
EN 10246-4:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections". This standard covers: This Part of EN 10246 specifies the requirements for automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections. The standard specifies acceptance levels, calibration procedures and gives guidance on the limitations of the tests. This Part of EN 10246 is applicable to the inspection of tubes with an outside diameter equal to or greater than 10 mm.
This Part of EN 10246 specifies the requirements for automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections. The standard specifies acceptance levels, calibration procedures and gives guidance on the limitations of the tests. This Part of EN 10246 is applicable to the inspection of tubes with an outside diameter equal to or greater than 10 mm.
EN 10246-4:1999 is classified under the following ICS (International Classification for Standards) categories: 23.040.10 - Iron and steel pipes; 77.040.20 - Non-destructive testing of metals. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10246-4:1999 has the following relationships with other standards: It is inter standard links to EN ISO 10893-3:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10246-4:1999 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/005, M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10246-4:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zerstörungsfreie Prüfung von Stahlrohren - Teil 4: Automatische Magnetfeldsonden-Streuflußprüfung nahtloser ferromagnetischer Stahlrohre über den gesamten Rohrumfang zum Nachweis von QuerfehlernEssais non destructifs des tubes en acier - Partie 4: Contrôle automatique par flux de fuite a l'aide de palpeurs magnétiques sur toute la circonférence des tubes pour la détection des imperfections transversales des tubes en aciers ferromagnétiques sans soudureNon-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux le
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...