EN 10246-18:2000
(Main)Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections
Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections
This Part of EN 10246 specifies the requirements for magnetic particle inspection of the end/bevel face at the ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections. This Part of EN 10246 is to be used for the detection of laminar imperfections on the end/bevel face at the ends of plain end and bevelled end tubes which may interfere with subsequent fabrication and inspection operations (e.g. welding, ultrasonic inspection of the welds). This part of EN 10246 may be used as an alternative to or in addition to EN 10246-17.
Zerstörungsfreie Prüfung von Stahlrohren - Teil 18: Magnetpulverprüfung der Rohrenden nahtloser und geschweißter ferromagnetischer Stahlrohre zum Nachweis von Dopplungen
Dieser Teil der EN 10246 legt die Anforderungen an die Magnetpulverprüfung der Stirnflächen bzw. Stirnflächenanschrägungen nahtloser und geschweißter ferromagnetischer Stahlrohre zum Nachweis von Dopplungen fest. Dieser Teil der EN 10246 ist anwendbar, um auf der Stirnfläche bzw. Stirnflächenanschrägung von Rohren mit glatten bzw. angeschrägten Stirnflächen Dopplungen nachzuweisen, die nachgeordnete Fertigungs- und Prüfoperationen (z. B. Schweißen, Ultraschallprüfung der Schweißnähte) beeinträchtigen könnten.
Essais non destructifs sur des tubes en acier - Partie 18: Contrôle par magnétoscopie des extrémités des tubes pour la détection de dédoublures des tubes en acier ferromagnétiques sans soudure et soudés
La présente norme européenne spécifie les prescriptions relatives au contrôle magnétoscopique des extrémités coupées d'équerre ou chanfreinées de tubes en acier ferromagnétique sans soudure et soudés pour la détection des dédoublures. L'objet de cette norme est de détecter, aux extrémités de tubes coupées d'équerre ou chanfreinées les dédoublures susceptibles d'interférer avec les opérations de mise en oeuvre ultérieure (par ex. le soudage, le contrôle des soudures par ultrasons, etc.). Cette partie de norme peut être utilisée à la place ou en supplément de l'EN 10246-17.
Neporušitveno preskušanje jeklenih cevi - 18. del: Ugotavljanje laminarnih napak na koncih nevarjenih in varjenih jeklenih cevi s preiskavo z magnetnimi delci
General Information
- Status
- Withdrawn
- Publication Date
- 15-Feb-2000
- Withdrawal Date
- 31-Mar-2011
- Technical Committee
- ECISS/TC 110 - Steel tubes, and iron and steel fittings
- Drafting Committee
- ECISS/TC 29/SC 10 - Non-destructive testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Apr-2011
- Completion Date
- 01-Apr-2011
Relations
- Effective Date
- 09-Apr-2011
Frequently Asked Questions
EN 10246-18:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections". This standard covers: This Part of EN 10246 specifies the requirements for magnetic particle inspection of the end/bevel face at the ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections. This Part of EN 10246 is to be used for the detection of laminar imperfections on the end/bevel face at the ends of plain end and bevelled end tubes which may interfere with subsequent fabrication and inspection operations (e.g. welding, ultrasonic inspection of the welds). This part of EN 10246 may be used as an alternative to or in addition to EN 10246-17.
This Part of EN 10246 specifies the requirements for magnetic particle inspection of the end/bevel face at the ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections. This Part of EN 10246 is to be used for the detection of laminar imperfections on the end/bevel face at the ends of plain end and bevelled end tubes which may interfere with subsequent fabrication and inspection operations (e.g. welding, ultrasonic inspection of the welds). This part of EN 10246 may be used as an alternative to or in addition to EN 10246-17.
EN 10246-18:2000 is classified under the following ICS (International Classification for Standards) categories: 23.040.10 - Iron and steel pipes; 77.040.20 - Non-destructive testing of metals. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10246-18:2000 has the following relationships with other standards: It is inter standard links to EN ISO 10893-5:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10246-18:2000 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/005, M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10246-18:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Neporušitveno preskušanje jeklenih cevi - 18. del: Ugotavljanje laminarnih napak na koncih nevarjenih in varjenih jeklenih cevi s preiskavo z magnetnimi delciZerstörungsfreie Prüfung von Stahlrohren - Teil 18: Magnetpulverprüfung der Rohrenden nahtloser und geschweißter ferromagnetischer Stahlrohre zum Nachweis von DopplungenEssais non destructifs sur des tubes en acier - Partie 18: Contrôle par magnétoscopie des extrémités des tubes pour la détection de dédoublures des tubes en acier ferromagnétiques sans soudure et soudésNon
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...