ASTM F3269-21
(Practice)Standard Practice for Methods to Safely Bound Behavior of Aircraft Systems Containing Complex Functions Using Run-Time Assurance
Standard Practice for Methods to Safely Bound Behavior of Aircraft Systems Containing Complex Functions Using Run-Time Assurance
SIGNIFICANCE AND USE
4.1 This practice provides an architectural framework for developing an RTA system, which provides run-time assurance as an alternative to design-time assurance to fulfill safety requirements for an unassured or complex function. The standard provides best practices and guidelines to assist in the RTA system’s development. Further, it describes the architectural components and requirements for designing the RTA system. Compliance to this practice is achieved by deriving RTA System requirements from the standard and capturing them in the Larger System Specification. The system design requirements can then be validated and verified using acceptable engineering practices. It is anticipated that this practice will provide a means to accept complex automation/autonomy aircraft functions that have been difficult to certify using traditional methods.
4.2 The following three-step process is used to derive verifiable design requirements using this architecture standard:
4.2.1 Create RTA System requirements using the guidance provided by this architecture standard.
4.2.2 Capture RTA System requirements in the Larger System Specification.
4.2.3 Perform verification and validation on the RTA System requirements in the Larger System Specification.
4.3 The RTA architecture can be applied to all sizes, levels, and classes of UAS. Using run-time assurance can provide systems with the following benefits:
4.3.1 The ability to mitigate hazards related to nondeterministic or unexpected behavior from unassured functions that employ advanced software methods or algorithmic complexity that cannot be certified using traditional certification practices.
4.3.2 The ability to use functions for which it may not be possible to obtain artifacts of conventional DO-178 or DO-254 assurance processes.
4.3.3 The ability to use COTS hardware or software, or both, for the unassured function.
4.3.3.1 For example, automotive components, thereby leveraging mature software with ex...
SCOPE
1.1 The scope of this practice includes the following:
1.1.1 A set of components that comprise an RTA system.
1.1.2 Requirements and best practices to determine safe boundaries and RTA system coverage.
1.1.3 Requirements and best practices for an RTA system and RTA components, as applicable.
1.1.4 Appendixes with examples that demonstrate key RTA system concepts.
1.2 RTA components are required to meet the design assurance level dictated by a safety assessment process. Guidance for the safety assessment process may be found in references appropriate for the intended operations (ARP4754A, ARP4761, Practice F3178, etc.).
1.3 This practice was developed with UAS in mind. It may be applicable for aspects of manned aircraft certification/approval, as well as aviation ground systems. The scope of this practice is also envisioned to allow a variety of aircraft implementations where a human may perform the role of either the Complex Function or a Recovery Function.
1.4 The scope of this practice does not cover aspects of hardware/software integration. These should be considered separately during the development process.
Note 1: This practice does not suggest a one-size-fits-all strategy knowing that not all use cases may fit well into this architecture. There may exist additional components required to satisfy specific applications to the practice.
1.5 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
1.6 Table of Contents:
Title
Section
Introduction
Background
Scope
1
Referenced Documents
2
ASTM Standards
2.1
FAA Advisory Circular
2.2
RTCA Standards
2.3
SAE Standards
2.4
Terminology
3
Unique and Common Terminology
3.3
Definitions of Terms Specific to This Standard
3.4
Abbreviations
3.5
...
General Information
Buy Standard
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: F3269 − 21
Standard Practice for
Methods to Safely Bound Behavior of Aircraft Systems
1
Containing Complex Functions Using Run-Time Assurance
This standard is issued under the fixed designation F3269; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
This practice defines an architecture using Run-Time Assurance (RTA) in conjunction with
unassured functions or commercial off-the-shelf (COTS) functions that have not been developed to
traditional aerospace standards and processes. This section provides the scope, applicability, and
intended use for the understanding of this practice.
Thepracticeisorganizedasfollows: (1)Anintroduction,background,andscopetoprovidecontext
for applying the capabilities defined in this practice to unmanned aircraft system (UAS) certification,
or operational approval, or both. (2) Definitions of key terms and abbreviations. (3) Description of a
Run-Time Assurance (RTA) architecture. (4) Appendixes that contain Examples of RTA in systems
and supplemental information. (a) Ground CollisionAvoidance System (GCAS) as an Example RTA.
(b) Machine Learning AI Autopilot (MLAA). (c) Run-Time Assurance for a Neural Network-Based
AdaptiveFlightControlofanUnmannedAircraft. (d)Run-TimeAssuranceforRisk-BasedOperation.
(e) Example Implementation of Timing and Latency Requirement. (5)Alist of documents referenced
herein.
BACKGROUND
There is significant interest from industry and civil aviation authorities (CAA) to have a standard
practicetoenablenewandnoveltechnologiesusedinUASoperationscontainingunassuredorCOTS
functions/systems, or both, to be used on certified aircraft and aviation systems. From this point
forward, “functions/systems” will be referenced as “functions.” Developing a certification path for
these technologies may also introduce greater safety to aviation.
In this practice, the term Complex Function (CF) may be any function, algorithm, component, or
system that has not been subject to accepted CAA or aerospace design assurance practices, or both
(DO-178C, DO-254,ARP4754A, etc.). Motivations to use such an unassured function arise from the
need or desire to use commercial, off-the-shelf systems or parts that have algorithmic complexity,
probabilistic algorithms, fuzzy logic, environmental uncertainties, or no pedigree. The complexity
may also come from factors associated with new and novel technologies such as sensor measurement
precision, nondeterministic algorithms, data-driven algorithms, or artificial intelligence (for example,
machine learning, genetic algorithms). A complex function may be any combination of software or
hardware.
Traditional approaches to digital avionics design begin with the assumption that each software and
hardware component on an aircraft contribute independently to the safe operation of the platform.At
the core of this process is an assessment of the risks associated with the functional failure of each
system, assembly, or component to ensure that the aircraft meets the required safety objectives. This
is known as design-time assurance.
This practice describes a run-time assurance method, which may be used as an alternative means
to or in combination with design-time assurance. RTA mitigates the risk of complex function
misbehaviorbymanagingthesystem’suseoftheComplexFunctionoutput.TheRTAincludesasafety
monitor, which monitors the complex function or the behavior the complex function has on the
system, or both, at run-time. In the event the safety monitor determines that the complex function is
not operating correctly, or is driving the system to an unsafe state, it disengages the complex function
and initiates a recovery function.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
F3269 − 21
This practice provides an RTAarchitecture and best practices that provide guidance to an applicant
for ensuring that the behavior of an unmanned aircraft system (UAS) containing complex functions
maintains the acceptable level of safety.
At the time of this practice’s development, there is no accepted formal guidance material for
certifying commercial UAS containing complex functions. Emerging CAA certification guidance,
processes, and concepts have been considered in the development of this practice.
1
ThispracticeisunderthejurisdictionofASTMCommitteeF38onUnmannedAircra
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: F3269 − 17 F3269 − 21
Standard Practice for
Methods to Safely Bound Flight Behavior of Unmanned
Aircraft Systems Containing Complex Functions Using Run-
1
Time Assurance
This standard is issued under the fixed designation F3269; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
This practice defines an architecture using Run-Time Assurance (RTA) in conjunction with
unassured functions or commercial off-the-shelf (COTS) functions that have not been developed to
traditional aerospace standards and processes. This section provides the scope, applicability, and
intended use for the understanding of this practice.
The practice is organized as follows: (1) An introduction, background, and scope to provide context
for applying the capabilities defined in this practice to unmanned aircraft system (UAS) certification,
or operational approval, or both. (2) Definitions of key terms and abbreviations. (3) Description of a
Run-Time Assurance (RTA) architecture. (4) Appendixes that contain Examples of RTA in systems
and supplemental information. (a) Ground Collision Avoidance System (GCAS) as an Example RTA.
(b) Machine Learning AI Autopilot (MLAA). (c) Run-Time Assurance for a Neural Network-Based
Adaptive Flight Control of an Unmanned Aircraft. (d) Run-Time Assurance for Risk-Based Operation.
(e) Example Implementation of Timing and Latency Requirement. (5) A list of documents referenced
herein.
BACKGROUND
There is significant interest from industry and civil aviation authorities (CAA) to have a standard
practice to enable new and novel technologies used in UAS operations containing unassured or COTS
functions/systems, or both, to be used on certified aircraft and aviation systems. From this point
forward, “functions/systems” will be referenced as “functions.” Developing a certification path for
these technologies may also introduce greater safety to aviation.
In this practice, the term Complex Function (CF) may be any function, algorithm, component, or
system that has not been subject to accepted CAA or aerospace design assurance practices, or both
(DO-178C, DO-254, ARP4754A, etc.). Motivations to use such an unassured function arise from the
need or desire to use commercial, off-the-shelf systems or parts that have algorithmic complexity,
probabilistic algorithms, fuzzy logic, environmental uncertainties, or no pedigree. The complexity
may also come from factors associated with new and novel technologies such as sensor measurement
precision, nondeterministic algorithms, data-driven algorithms, or artificial intelligence (for example,
machine learning, genetic algorithms). A complex function may be any combination of software or
hardware.
Traditional approaches to digital avionics design begin with the assumption that each software and
hardware component on an aircraft contribute independently to the safe operation of the platform. At
the core of this process is an assessment of the risks associated with the functional failure of each
system, assembly, or component to ensure that the aircraft meets the required safety objectives. This
is known as design-time assurance.
1
This practice is under the jurisdiction of ASTM Committee F38 on Unmanned Aircraft Systems and is the direct responsibility of Subcommittee F38.01 on Airworthiness.
Current edition approved Sept. 1, 2017July 15, 2021. Published September 2017November 2021. Originally approved in 2017. Last previous edition approved in 2017
as F3269–17. DOI: 10.1520/F3269-17.10.1520/F3269-21.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
F3269 − 21
This practice describes a run-time assurance method, which may be used as an alternative means
to or in combination with design-time assurance. RTA mitigates the risk of complex function
misbehavior by managing the system’s use of the Complex Function output. The RTA includes a safety
monitor, which monitors the complex function or the behavior the complex function has on the
system, or both, at run-time. In the event the safety monitor determines that the complex function is
not operating correctly, or is driving the system to an unsafe state, it disengages the complex function
and initiates a reco
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.