iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM E1705-11

(Terminology)

Standard Terminology Relating to Biotechnology

Standard Terminology Relating to Biotechnology

SCOPE
1.1 This document is composed of terms, definitions of terms, descriptions of terms, and acronyms used in ASTM documents related to the field of biotechnology. Terms that are adequately defined in a general dictionary are not defined in this terminology standard.
1.2 This standard includes terminology used in biotechnology areas, such as, but not limited to: biological drug products, materials for biotechnology, characterization and identification of biological systems, aseptic sampling, preservation of biological samples, membrane filters, molecular biology, biomass conversion, fuel manufacturing facilities, and fuel analysis.

General Information

Status
Historical
Publication Date
30-Apr-2011
ICS
01.040.07 - Natural and applied sciences (Vocabularies)
07.080 - Biology. Botany. Zoology
Technical Committee
E48 - Bioenergy and Industrial Chemicals from Biomass
Drafting Committee
E48.91 - Terminology
Current Stage
Ref Project

Relations

Replaces
ASTM E1705-95(2002) - Standard Terminology Relating to Biotechnology (Withdrawn 2011)
Effective Date
01-May-2011
Replaced By
ASTM E1705-13 - Standard Terminology Relating to Biotechnology
Effective Date
01-Nov-2013
Referred By
ASTM E3237-19 - Standard Specification for Undenatured Ethanol from Biomass for Use in Industrial Applications
Effective Date
01-May-2011
Referred By
ASTM E3066-20 - Standard Practice for Evaluating Relative Sustainability Involving Energy or Chemicals from Biomass
Effective Date
01-May-2011
Referred By
ASTM E3256-20 - Standard Practice for Reference Scenarios When Evaluating the Relative Sustainability of Bioproducts
Effective Date
01-May-2011
Referred By
ASTM E2114-23 - Standard Terminology for Sustainability
Effective Date
01-May-2011

Buy Standard

ASTM E1705-11 - Standard Terminology Relating to BiotechnologyASTM E1705-11 - Standard Terminology Relating to Biotechnology
PreviousNext
Standard
ASTM E1705-11 - Standard Terminology Relating to Biotechnology
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: E1705 − 11
StandardTerminology
1
Relating to Biotechnology
This standard is issued under the fixed designation E1705; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope and Low Temperature Maintenance of Bacteria, Fungi,
Protista,Viruses, Genetic Elements, andAnimal and Plant
1.1 This document is composed of terms, definitions of
3
Tissues (Withdrawn 2011)
terms, descriptions of terms, and acronyms used in ASTM
E1344Guide for Evaluation of Fuel Ethanol Manufacturing
documents related to the field of biotechnology.Terms that are
Facilities
adequately defined in a general dictionary are not defined in
E1357TestMethodforDeterminingtheRateofBioleaching
this terminology standard.
of Iron From Pyrite by Thiobacillus Ferrooxidans (With-
3
1.2 This standard includes terminology used in biotechnol-
drawn 2010)
ogyareas,suchas,butnotlimitedto:biologicaldrugproducts,
E1493Guide for Identification of Bacteriophage M13 or Its
materials for biotechnology, characterization and identification
DNA
of biological systems, aseptic sampling, preservation of bio-
E1531PracticeforDetectionofMycoplasmaContamination
logical samples, membrane filters, molecular biology, biomass
of Cell Cultures by Growth on Agarose Medium
conversion, fuel manufacturing facilities, and fuel analysis.
E1532PracticeforDetectionofMycoplasmaContamination
of Cell Cultures by Use of Bisbenzamide DNA-Binding
2. Referenced Documents
Fluorochrome
2
2.1 ASTM Standards: E1533PracticeforIndirectDetectionofMycoplasmainCell
E869Test Method for Performance Evaluation of Fuel
Culture by 4'-6-Diamidino-2-2 Phenylindole (DAPI)
Ethanol Manufacturing Facilities Staining
E870Test Methods for Analysis of Wood Fuels
E1535Test Method for Performance Evaluation of Anaero-
3
E1117Practice for Design of Fuel-Alcohol Manufacturing
bic Digestion Systems (Withdrawn 2011)
Facilities
E1536PracticeforDetectionofMycoplasmaContamination
E1126Terminology Relating to Biomass Fuels (Withdrawn
of Bovine Serum by Large Volume Method
3
2003) E1564 Guide for Design and Maintenance of Low-
E1285GuideforIdentificationofBacteriophageLambda(λ)
Temperature Storage Facilities for Maintaining Cryopre-
or Its DNA served Biological Materials
E1286Guide for Identification of Herpes Simplex Virus or
E1565Guide for Inventory Control and Handling of Bio-
Its DNA logical Material Maintained at Low Temperatures
E1287PracticeforAsepticSamplingofBiologicalMaterials
E1566Guide for Handling Hazardous Biological Materials
3
(Withdrawn 2008) in Liquid Nitrogen
E1298Guide for Determination of Purity, Impurities, and
E1567Guide for Biopharmaceutical Facilities Architectural
3
Contaminants in Biological Drug Products Design Considerations (Withdrawn 2010)
E1342PracticeforPreservationbyFreezing,Freeze-Drying,
2.2 Federal Standards:
Title 21,Code of Federal Regulations (CFR), Parts 210 and
4
211
1
This terminology is under the jurisdiction of ASTM Committee E48 on
BioenergyandIndustrialChemicalsfromBiomassandisthedirectresponsibilityof
3. Terminology
Subcommittee E48.91 on Terminology.
3.1 Definitions:
Current edition approved May 1, 2011. Published June 2011. Originally
approved in 1995. Last previous edition approved in 2002 as E1705–95(2002)
accessible—permitting close approach or contact that could
which was withdrawn January 2011 and reinstated in May 2011. DOI: 10.1520/
include requiring removal or opening of an access panel or
E1705-11.
2 door. E1117
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
4
the ASTM website. Available from Standardization Documents Order Desk, DODSSP, Bldg. 4,
3
The last approved version of this historical standard is referenced on Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://
www.astm.org. dodssp.daps.dla.mil.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
E1705 − 11
aerobic—able to live, grow, or take place only where free azeotrope—constant boiling mixture, for ethanol-water, the
oxygen is present. E1126 azeotrope of 95.6% ethanol and 4.4% water (both percent-
ages by volume) boils at one atmosphere pressure. E1344
aerobic fermentation—fermentation processes that require
the presence of air. E1126
azeotropic distillation—theuseofanorganicsolventtocreate
a new constant boiling point mixture, a method used to
alcohols—series of liquid products comp
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM E1705-23(Terminology)
Standard Terminology Relating to Bioenergy and Industrial Chemicals from Biomass

SCOPE
1.1 This document is composed of terms, definitions of terms, descriptions of terms, and acronyms used in ASTM documents related to the field of bioenergy and industrial chemicals from biomass. Terms that are adequately defined in a general dictionary are not defined in this terminology standard.  
1.2 This standard includes terminology used in areas related to bioenergy and industrial chemicals from biomass, such as, but not limited to: characterization and identification of biomass, aseptic sampling, preservation of biological samples, sustainability, denatured fuel ethanol, cooking fuels and biomass conversion.  
1.2.1 The bylaws for Committee E48 allow the definitions approved in current E48 standards to be added to this terminology standard editorially. The definitions will have an attribution to indicate the standard(s) containing the definition. Subcommittee E48.91 can also develop definitions for the terminology standard. Those definitions will be attributed to the subcommittee.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM E1705-23(Terminology)
Standard Terminology Relating to Bioenergy and Industrial Chemicals from Biomass

SCOPE
1.1 This document is composed of terms, definitions of terms, descriptions of terms, and acronyms used in ASTM documents related to the field of bioenergy and industrial chemicals from biomass. Terms that are adequately defined in a general dictionary are not defined in this terminology standard.  
1.2 This standard includes terminology used in areas related to bioenergy and industrial chemicals from biomass, such as, but not limited to: characterization and identification of biomass, aseptic sampling, preservation of biological samples, sustainability, denatured fuel ethanol, cooking fuels and biomass conversion.  
1.2.1 The bylaws for Committee E48 allow the definitions approved in current E48 standards to be added to this terminology standard editorially. The definitions will have an attribution to indicate the standard(s) containing the definition. Subcommittee E48.91 can also develop definitions for the terminology standard. Those definitions will be attributed to the subcommittee.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM E943-23(Terminology)
Standard Terminology Relating to Biological Effects and Environmental Fate

SCOPE
1.1 This terminology document defines terms commonly used in standards developed by ASTM Subcommittee E50.47 on Biological Effects and Environmental Fate. This terminology document is intended to be consistent with the use of terms in ASTM standards related to this field and, to the extent possible, with use by other organizations.  
1.1.1 If a specific Subcommittee E50.47 standard uses one of these terms in a different context, then the term should be defined in that standard. A term used only in a specific ASTM standard need not be included in this terminology document.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM E3072-22a(Terminology)
Standard Terminology for Industrial Biotechnology and Synthetic Biology

SCOPE
1.1 This terminology is a repository for the terms, and their standardized definitions, as relates to the technical standards generated by Committee E62 on Industrial Biotechnology and Synthetic Biology. The meanings and explanations of the technical terms have been written for both the nonexpert and the expert user.  
1.2 At a minimum, this terminology is updated annually (at a time corresponding to the publication of the Annual Book of ASTM Standards containing this terminology standard) to include editorially any terms approved in the committee’s technical standards.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM F3570-22(Terminology)
Standard Terminology Relating to Microphysiological Systems

SCOPE
1.1 This terminology defines basic terms and presents the relationships of the scientific fields related to microphysiological systems (MPS). Committee F04 has defined these terms for the specific purpose of unifying the language used in standards for MPS.  
1.2 The terms and nomenclature presented in this standard are for the specific purpose of unifying the language used in MPS standards and are not intended for labeling of regulated medical products.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM F1210-23(Guide)
Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies

SIGNIFICANCE AND USE
3.1 This guide is meant to aid response teams who may use it during spill response planning and spill events.  
3.2 This guide should be adapted to site specific circumstance.
SCOPE
1.1 This guide covers the use of oil spill dispersants to assist in the control of oil spills. The guide is written with the goal of minimizing the environmental impacts of oil spills; this goal is the basis on which the recommendations are made. Aesthetic and socioeconomic factors are not considered, although these and other factors are often important in spill response.  
1.2 Spill responders have available several means to control or clean up spilled oil. Chemical dispersants should be given equal consideration with other spill countermeasures.  
1.3 This is a general guide only. Oil, as used in this guide, includes crude oils and refined petroleum products. Differences between individual dispersants or between different oil products are not considered. The dispersibility of the oil with the chosen dispersant should be evaluated.  
1.4 The guide is organized by habitat type, for example, small ponds and lakes, rivers and streams, and land. It considers the use of dispersants primarily to protect habitats from impact (or to minimize impacts).  
1.5 This guide applies only to freshwater and other inland environments. It does not consider the direct application of dispersants to subsurface waters.  
1.6 In making dispersant use decisions, appropriate government authorities should be consulted as required by law.  
1.7 This guide does not address getting regulatory approval.  
1.8 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    3 pages
    English language
    sale 15% off
  • Guide
    3 pages
    English language
    sale 15% off
ASTM
ASTM C596-23(Test Method)
Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

SIGNIFICANCE AND USE
4.1 This test method establishes a selected set of conditions of temperature, relative humidity and rate of evaporation of the environment to which a mortar specimen of stated composition shall be subjected for a specified period of time during which its change in length is determined and designated “drying shrinkage.”  
4.2 The drying shrinkage of mortar as determined by this test method has a linear relation to the drying shrinkage of concrete made with the same cement and exposed to the same drying conditions.4 Hence this test method may be used when it is desired to develop data on the effect of a hydraulic cement on the drying shrinkage of concrete made with that cement.
SCOPE
1.1 This test method determines the change in length on drying of mortar bars containing hydraulic cement and graded standard sand.  
1.2 The values stated in SI units are to be regarded as standard. When combined standards are referenced, the selection of measurement system is at the user’s discretion subject to the requirements of the referenced standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure).2  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM D1751-23(Specification)
Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Asphalt Types)

SCOPE
1.1 This specification covers preformed expansion joint filler having relatively little extrusion and substantial recovery after release from compression.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
Note 1: Attention is called to Specifications D1752 and D994/D994M.  
1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM B637-23(Specification)
Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

ABSTRACT
This specification covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for high-temperature service. Chemical analysis shall be performed on the alloy and shall conform to the chemical composition requirement in carbon, manganese, silicon, phosphorus, sulfur, chromium, cobalt, molybdenum, columbium, tantalum, titanium, aluminum, zirconium, boron, iron, copper, and nickel. The material shall follow recommended annealing treatment, solution treatment, stabilizing treatment, and precipitation hardening treatment. Tension testing, hardness testing and stress-rupture testing shall be performed on the material and shall comply to the required tensile strength, yield strength, elongation, reduction in area, and Brinell hardness.
SCOPE
1.1 This specification2 covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for moderate or high temperature service (Table 1).  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    7 pages
    English language
    sale 15% off
  • Technical specification
    7 pages
    English language
    sale 15% off
ASTM
ASTM D8139-23(Specification)
Standard Specification for Semi-Rigid, Closed-Cell Polypropylene Foam, Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction

SCOPE
1.1 This specification covers preformed expansion joint fillers made from closed-cell polypropylene foam materials having suitable compressibility, recovery from compression, nonextruding, and weather-resistant characteristics.  
1.1.1 Type I, closed-cell polypropylene foam.  
1.2 These joint fillers are intended for use in concrete pavements in full-depth joints. There are several variations in size with typical thicknesses of 1/2 in. (12.7 mm), 3/4 in. (19.05 mm), and 1 in. (25.4 mm); typical widths of 31/2 in. (88.9 mm), 4 in. (101.6 mm), 5 in. (127 mm), 6 in. (152.5 mm), 7 in. (177.8 mm), 8 in. (203.2 mm), or 48 in. (1.2 m) sheet; and typical lengths of 5 ft (1.52 m) and 10 ft (3.05 m).  
1.3 The values stated in inch-pound units are to be regarded as the standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
  • Technical specification
    2 pages
    English language
    sale 15% off