ASTM F1700-04

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F1700 – 04
Standard Specification for
1
Solid Vinyl Floor Tile
This standard is issued under the fixed designation F1700; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
TABLE 1 Minimum Binder Content
1. Scope
2
Class I Class II Class III
1.1 This specification covers solid vinyl floor tiles that are
Each ply or layer 34 % 34 % . . .
monolithic, surface decorated or printed, and that have binder
Clear wear layer . . . . . . 90 %
contents referenced in Table 1.
Intermediate colored layer . . . . . . 34 %
1.2 This type of floor covering is intended for use in
Each base layer . . . . . . 34 %
commercial, light commercial, and residential buildings. Gen-
eral information and performance characteristics which deter-
mine serviceability and recommended use are included in this
F1914 Test Methods for Short-Term Indentation and Re-
specification.
sidual Indentation of Resilient Floor Covering
1.3 This standard does not purport to address all of the
F2055 Test Method for Size and Squareness of Resilient
safety concerns, if any, associated with its use. It is the
Floor Tile by Dial Gage Method
responsibility of the user of this standard to establish appro-
F2199 Test Method for Determining Dimensional Stability
priate safety and health practices and determine the applica-
of Resilient Floor Tile after Exposure to Heat
bility of regulatory limitations prior to use.
2.2 Other Standards:
1.4 The values stated in inch-pound units are to be regarded
ANSI/ASQC Z1.4–1993 Sampling Procedures and Tables
4
as the standard. The values given in parentheses are provided
for Inspection by Attributes
for information only.
3. Classification
2. Referenced Documents
3.1 The vinyl floor tiles covered by this specification shall
3
2.1 ASTM Standards:
be classified as follows:
F137 Test Method for Flexibility of Resilient Flooring
3.1.1 Class I—Monolithic Vinyl Tile.
Materials with Cylindrical Mandrel Apparatus
3.1.1.1 Type A—Smooth Surface.
F141 Terminology Relating to Resilient Floor Coverings
3.1.1.2 Type B—Embossed Surface.
F373 Test Method for Embossed Depth of Resilient Floor
3.1.2 Class II—Surface-Decorated Vinyl Tile.
Coverings
3.1.2.1 Type A—Smooth Surface.
F386 Test Method for Thickness of Resilient Flooring
3.1.2.2 Type B—Embossed Surface.
Materials Having Flat Surfaces
3.1.3 Class III—Printed Film Vinyl Tile.
F925 Test Method for Resistance to Chemicals of Resilient
3.1.3.1 Type A—Smooth Surface.
Flooring
3.1.3.2 Type B—Embossed Surface.
F1514 Test Method for Measuring Heat Stability of Resil-
3.2 The embossed surfaces may or may not be grouted with
ient Flooring by Color Change
ink.
F1515 Test Method for Measuring Light Stability of Resil-
4. Ordering Information
ient Flooring by Color Change
4.1 The purchaser shall state whether this specification is to
be used, select the preferred options permitted herein, and
1
ThisspecificationisunderthejurisdictionofASTMCommitteeF6onResilient
include the following contract requirements on the purchase
Floor Coverings and is the direct responsibility of Subcommittee F06.80 on
order:
Specifications.
Current edition approved Sept. 1, 2004. Published October 2004. Originally
4.1.1 Title, number, and date of this specification,
approved in 1996. Last previous edition approved in 1999 as F1700–99. DOI:
4.1.2 Class, type, and pattern number (Section 3),
10.1520/F1700-04.
2
4.1.3 Quantity in square feet, pieces, or cartons,
For solid vinyl definition, refer to Terminology F141.
3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
4
Standards volume information, refer to the standard’s Document Summary page on Available from American National Standards Institute, 11 West 42nd St., New
the ASTM website. York, NY 10036.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
F1700 – 04
4.1.4 Size required (Section 6), 6. Physical Requirements Physical Requirements
4.1.5 Thickness required (Section 6),
6.1 BinderContent—Thebindercontentofeachplyorlayer
4.1.6 Lot formation if other than as specified in ANSI/
shall be determined by statement of formula (Manufacturer
ASQC Z1.4–1993 (see Sections 8 and 10),
Certificate of Compliance).
5
4.1.7 Sampling if other than as specified in ANSI/ASQC
6.2 Size —Unless otherwise specified (see 4.1.4), the tile
Z1.4–1993 (see Sections 8 and 10),
shall be 12 by 12 in.
...