BC-T-344 -
General Information
RTS/TCCE-06187
- Standard16 pagesEnglish languagesale 15% off
REN/TETRA-08195
- Standard268 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-08193
- Standard201 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-08192
- Standard57 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-08194
- Standard103 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-08192
- Standard57 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-08194
- Standard103 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-08193
- Standard201 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-08195
- Standard268 pagesEnglish languagesale 10% offe-Library read for1 day
The present document defines the Terrestrial Trunked Radio (TETRA) system supporting Voice plus Data (V+D). It specifies:
- general design aspects (e.g. reference points, numbering and addressing, or protocol architecture);
- the system bearer and mobility management services, and the corresponding air interface protocols;
- the interworking between TETRA networks;
- the interworking of TETRA networks with other networks, via gateways;
- the peripheral equipment interface on the mobile station;
- the Line Station (LS) interface with TETRA networks;
- the security protocols and mechanisms applicable to TETRA networks and to TETRA terminal equipment;
- the supplementary services applicable to the basic TETRA tele- or bearer services.
The TETRA V+D interworking - basic operation part defines the interworking between TETRA networks over the corresponding interface: the Inter-System Interface (ISI). It comprises the following subparts:
- ISI general design;
- Additional Network Feature - ISI Individual Call (ANF-ISIIC);
- Additional Network Feature - ISI Group Call (ANF-ISIGC);
- Additional Network Feature - ISI Short Data service (ANF-ISISDS);
- Additional Network Feature - ISI Mobility Management (ANF-ISIMM);
- 8 kbit/s encoding of user information at the ISI.
The present document is the ANF-ISIIC sub-part.
ANF-ISIIC enables calls to be set-up by a user registered in one TETRA network to another user registered in another TETRA network, operating at the ISI of both SwMIs. It also supports call restoration when a user has migrated to another TETRA network during an established call. Additionally, ANF-ISIIC allows TETRA signalling information to be passed from a TETRA SwMI to another TETRA SwMI supporting the TETRA individual call procedures as defined in clauses 11 and 14 of EN 300 392-2 [1]. Like all other Additional Network Feature (ANF) specifications, those of ANF-ISIIC are produced in three stages, according to the method described in ITU-T Recommendation I.130 [i.5]. The present document contains the stage 1 and 2 descriptions of ANF-ISIIC, and its partial stage 3 description. The stage 1 description specifies the ANF as seen by its users, which are essentially the individual call control entities in both TETRA networks. The stage 2 description identifies the functional entities involved in the ANF and the information flows between them. And the partial stage 3 description of ANF-ISIIC specifies its protocol. NOTE: According to ITU-T Recommendation I.130 [i.5], the stage 3 description of a bearer or tele-service addresses the network implementation aspects. Consequently, it comprises two steps: the specifications of all protocols at the various reference points involved in any of the service procedures (notably the service operation) are the first step of the stage 3 description, and the specifications of the functions of the corresponding network entities are its second step. The latter have not been provided since they can be derived from the specification of the functional entity
actions in the stage 2 description. The present document applies to TETRA networks which support inter-TETRA individual calls. More specifically, it applies to their Circuit Mode Control Entities (CMCE), as defined in clause 14.2 of EN 300 392-2 [1], and to their ANF-ISIIC entities defined in the stage 2 description.
- Standard139 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard139 pagesEnglish languagesale 15% off
The present document defines the stage 3 description of the Supplementary Service Area Selection (SS-AS) for the Terrestrial Trunked Radio (TETRA). SS-AS enables the calling user to establish a call in restricting the area where the participating users in a group call or the connected user in an individual call may be located. Man Machine interface and Charging clauses are outside the scope of the present document. Supplementary service specifications are produced in three stages according to the method described in ITU-T Recommendation I.130 [i.1]. The stage 1 description specifies the service from the user's point of view (see EN 300 392-10-8 [i.3]). The stage 2 description identifies the functional capabilities and the information flows needed to support the service as specified in its stage 1 description (see EN 300 392-11-8 [i.4]). The present stage 3 description specifies the protocols at the air interface and at the various Inter-System Interfaces (ISI) to support SS-AS. NOTE: According to ITU-T Recommendation I.130 [i.1], the stage 3 description of any telecommunication service addresses the network implementation aspects. Consequently it comprises two steps: the specifications of all protocols at the various reference points involved in any of the service procedures (notably the service operation) are the first step of the stage 3 description, and the specifications of the functions of the corresponding network entities are its second step. The latter have not been provided since they can be derived from the specification of the functional entity actions in the stage 2 description. The present document is applicable to Voice plus Data individual calls or group calls; more specifically to the following entities:
- the MS/LS of the calling user in an individual call or a group call;
- the originating Switching and Management Infrastructure (SwMI) in an individual call or a group call;
- the group home SwMI and the participating SwMIs for a group call;
- the terminating SwMI for an individual call; and
- optionally, the home SwMI of the group or of the MS/LSs involved, for managing the supplementary service.
- Standard108 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard108 pagesEnglish languagesale 15% off
REN/TETRA-03193
- Standard139 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard139 pagesEnglish languagesale 15% off
REN/TETRA-03198
- Standard108 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard108 pagesEnglish languagesale 15% off
The present document defines addressing for Terrestrial Trunked Radio system (TETRA) supporting Voice plus Data (V+D). It also gives background information of the air interface, the interworking between TETRA systems and to other systems via gateways, the terminal equipment interface on the Mobile Station (MS), the security aspects in TETRA networks, the management services offered to the operator, the performance objectives, and the supplementary services that come in addition to the basic and tele-services used as a basis for TETRA standardization. The present document defines and specifies the TETRA addressing and identities and their organization in groups corresponding to the different functions. It establishes the background of the TETRA general network design for standardization purposes:
- it gives information about the circuit mode and packet mode reference points for the MS and switching and management infrastructure;
- it gives information about a model of the air interface protocol stack, different functions of layers and sublayers;
- it gives information about the functions provided by the circuit mode teleservices used for speech and basic services used for data transfer;
- it gives information about the functions related to the management of the users' mobility across networks and inside a network including roaming and migration;
- it gives information about the functions related to the transport of short data messages as a service specific to TETRA;
- it gives information about the functions related to the support of packet data service in a way specific to TETRA;
- it gives information about the supplementary services that mainly extend the capabilities of the circuit mode basic and teleservices;
- it gives information about the various possibilities of individual circuit mode call scenarios and provides guidance on priority concepts for packet data and circuit mode services and on the service quality. NOTE: This part of the multi-part document may, by its nature as a general design statement, require updating when later parts of the multi-part document are completed and maintained (in order to avoid any non-alignment). If a discrepancy occurs between this part and any other part of the multi-part document, then the other part will take precedence. The present document may be maintained mainly on those clauses, which are referred from other parts or standards.
- Standard180 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard180 pagesEnglish languagesale 15% off
- Standard180 pagesEnglish languagesale 15% off
REN/TETRA-03190
- Standard180 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard180 pagesEnglish languagesale 15% off
- Standard180 pagesEnglish languagesale 15% off
Addition new Notification element value Restricted group coverage.
The present document defines principles and requirements generally applicable to the stage 2 and 3 descriptions of supplementary services for the Terrestrial Trunked Radio (TETRA).
The present document is applicable to any TETRA terminal equipment (Mobile Station (MS) or Line Station (LS) and to any TETRA network (Switching and Management Infrastructure - SwMI) which support at least one TETRA Supplementary Service (SS). In addition, its routeing requirements of supplementary service information are applicable to any TETRA network with a Voice plus Data (V+D) Inter-System Interface (ISI) to another TETRA network which supports at least one TETRA SS.
- Standard55 pagesEnglish languagesale 15% off
- Standard54 pagesEnglish languagesale 15% off
- Standard55 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-03187
- Standard55 pagesEnglish languagesale 15% off
- Standard54 pagesEnglish languagesale 15% off
- Standard55 pagesEnglish languagesale 10% offe-Library read for1 day
The present document defines the Terrestrial Trunked Radio (TETRA) system supporting Voice plus Data (V+D). It specifies:
• general design aspects (e.g. reference points, numbering and addressing, or protocol architecture);
• the system bearer and mobility management services, and the corresponding air interface protocols;
• the interworking between TETRA networks;
• the interworking of TETRA networks with other networks, via gateways;
• the peripheral equipment interface on the mobile station;
• the Line Station (LS) interface with TETRA networks;
• the security protocols and mechanisms applicable to TETRA networks and to TETRA terminal equipment;
• the supplementary services applicable to the basic TETRA tele- or bearer services.
The TETRA V+D interworking - basic operation part defines the interworking between TETRA networks over the corresponding interface: the Inter-System Interface (ISI). It comprises the following subparts:
• ISI general design;
• Additional Network Feature - ISI Individual Call (ANF-ISIIC);
• Additional Network Feature - ISI Group Call (ANF-ISIGC);
• Additional Network Feature - ISI Short Data service (ANF-ISISD);
• Additional Network Feature - ISI Mobility Management (ANF-ISIMM);
• 8 kbit/s encoding of user information at the ISI.
The present document is the ANF-ISIIC sub-part. ANF-ISIIC enables calls to be set-up by a user registered in one TETRA network to another user registered in another TETRA network, operating at the ISI of both SwMIs. It also supports call restoration when a user has migrated to another TETRA network during an established call. Additionally, ANF-ISIIC allows TETRA signalling information to be passed from a TETRA SwMI to another TETRA SwMI supporting the TETRA individual call procedures as defined in clauses 11 and 14 of EN 300 392-2 [1].
Like all other Additional Network Feature (ANF) specifications, those of ANF-ISIIC are produced in three stages, according to the method described in ITU-T Recommendation I.130 [11]. The present document contains the stage 1 and 2 descriptions of ANF-ISIIC, and its partial stage 3 description. The stage 1 description specifies the ANF as seen by its users, which are essentially the individual call control entities in both TETRA networks. The stage 2 description identifies the functional entities involved in the ANF and the information flows between them. And the partial stage 3 description of ANF-ISIIC specifies its protocol.
NOTE: According to ITU-T Recommendation I.130 [11], the stage 3 description of a bearer or tele-service addresses the network implementation aspects. Consequently, it comprises two steps: the specifications of all protocols at the various reference points involved in any of the service procedures (notably the service operation) are the first step of the stage 3 description, and the specifications of the functions of the corresponding network entities are its second step. The latter have not been provided since they can be derived from the specification of the functional entity actions in the stage 2 description. The present document applies to TETRA networks which support inter-TETRA individual calls. More specifically, it applies to their Circuit Mode Control Entities (CMCE), as defined in clause 14.2 of EN 300 392-2 [1], and to their ANF-ISIIC entities defined in the stage 2 description.
- Standard139 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-03161
- Standard139 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-08146
- Standard51 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-08162
- Standard201 pagesEnglish languagesale 10% offe-Library read for1 day
The present document specifies the stage 3 description of the Supplementary Service Talking Party Identification (SS-TPI) for the Terrestrial Trunked Radio (TETRA). The SS-TPI supplementary service enables the party/parties participating in a call to receive the identification of the talking/sending party. The SS-TPI is activated against individual identity in individual call and against group identity in group calls. Man-Machine Interface (MMI) and charging principles are outside the scope of the present document. The supplementary service stage 3 description is preceded by the stage 1 and the stage 2 description of the service, according to the method described in ITU-T Recommendation I.130 [10]. The stage 1 description specifies the service from the user's point of view. The stage 2 description identifies the functional capabilities and the information flows needed to support the supplementary service as specified in its stage 1 description. The present stage 3 description specifies the protocols at the air interface and at the various Inter-System Interfaces (ISI) to support SS-TPI. NOTE: According to ITU-T Recommendation I.130 [10], the stage 3 description of any telecommunication service addresses the network implementation aspects. Consequently it comprises two steps: the specifications of all protocols at the various reference points involved in any of the service procedures (notably the service operation) are the first step of the stage 3 description, and the specifications of the functions of the corresponding network entities are its second step. The latter have not been provided since they can be derived from the specification of the functional entity actions in the stage 2 description. The present document is applicable to Voice plus Data individual call or group call; more specifically to the following entities: the MS of listening/receiving users during an individual call or a group call; to the originating Switching and Management Infrastructures (SwMIs) in an individual call or a group call; to the group home SwMI and the participating SwMI for a group call; to the terminating SwMI for an individual call; and, optionally, to the home SwMI of the group or of the MSs involved, for managing the supplementary service.
- Standard87 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-08079-4
- Standard107 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-08079-5
- Standard275 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-03167
- Standard87 pagesEnglish languagesale 10% offe-Library read for1 day
The present document defines the Terrestrial Trunked Radio (TETRA) system supporting Voice plus Data (V+D). It specifies:
• general design aspects (e.g. reference points, numbering and addressing, or protocol architecture);
• the system bearer and mobility management services, and the corresponding air interface protocols;
• the interworking between TETRA networks;
• the interworking of TETRA networks with other networks, via gateways;
• the peripheral equipment interface on the mobile station;
• the Line Station (LS) interface with TETRA networks;
• the security protocols and mechanisms applicable to TETRA networks and to TETRA terminal equipment;
• the supplementary services applicable to the basic TETRA tele- or bearer services.
The TETRA V+D interworking - basic operation part defines the interworking between TETRA networks over the corresponding interface: the Inter-System Interface (ISI). It comprises the following subparts:
• ISI general design;
• Additional Network Feature - ISI Individual Call (ANF-ISIIC);
• Additional Network Feature - ISI Group Call (ANF-ISIGC);
• Additional Network Feature - ISI Short Data service (ANF-ISISD);
• Additional Network Feature - ISI Mobility Management (ANF-ISIMM);
• 8 kbit/s encoding of user information at the ISI.
The present document is the ANF-ISIIC sub-part.
ANF-ISIIC enables calls to be set-up by a user registered in one TETRA network to another user registered in another TETRA network, operating at the ISI of both SwMIs. It also supports call restoration when a user has migrated to another TETRA network during an established call. Additionally, ANF-ISIIC allows TETRA signalling information to be passed from a TETRA SwMI to another TETRA SwMI supporting the TETRA individual call procedures as defined in clauses 11 and 14 of EN 300 392-2 [1].
Like all other Additional Network Feature (ANF) specifications, those of ANF-ISIIC are produced in three stages, according to the method described in ITU-T Recommendation I.130 [11]. The present document contains the stage 1 and 2 descriptions of ANF-ISIIC, and its partial stage 3 description. The stage 1 description specifies the ANF as seen by its users, which are essentially the individual call control entities in both TETRA networks. The stage 2 description identifies the functional entities involved in the ANF and the information flows between them. And the partial stage 3 description of ANF-ISIIC specifies its protocol.
NOTE: According to ITU-T Recommendation I.130 [11], the stage 3 description of a bearer or tele-service addresses the network implementation aspects. Consequently, it comprises two steps: the specifications of all protocols at the various reference points involved in any of the service procedures (notably the service operation) are the first step of the stage 3 description, and the specifications of the functions of the corresponding network entities are its second step. The latter have not been provided since they can be derived from the specification of the functional entity actions in the stage 2 description. The present document applies to TETRA networks which support inter-TETRA individual calls. More specifically, it applies to their Circuit Mode Control Entities (CMCE), as defined in clause 14.2 of EN 300 392-2 [1], and to their ANF-ISIIC entities defined in the stage 2 description.
- Standard138 pagesEnglish languagesale 10% offe-Library read for1 day
The present document defines the mobility management of interworking at the Inter-System Interface (ISI) for Terrestrial Trunked Radio (TETRA) system supporting Voice plus Data (V+D).
The TETRA V+D Inter-working - basic operation part defines the Inter-System Interface (ISI) between the SwMIs as specified in the following sub-parts:
• Additional Network Feature - Inter-System Interface General Description (ANF-ISIGD);
• Additional Network Feature - Inter-System Interface Individual Call (ANF-ISIIC);
• Additional Network Feature - Inter-System Interface Group Call (ANF-ISIGC);
• Additional Network Feature - Inter-System Interface Short Data Service (ANF-ISISD);
• Additional Network Feature - Inter-System Interface Mobility Management (ANF-ISIMM).
NOTE: These ENs are produced in analogy with the ITU-T Recommendation I.130 [8].
The present document contains the ANF-ISIMM part. The ANF-ISIMM part defines additional Mobility Management (MM) services to the SwMIs. If supported, the ANF-ISIMM services complement the intra-SwMI-MM, authentication and key management services. In support of these, the ANF-ISIMM enables the invocation and operation of these services between the SwMIs over the ISI. Thus, ANF-ISIMM offers the following services:
• migration and restricted migration;
• individual subscriber and group profile update;
• profile update;
• de-registration;
• group attachment/detachment;
• individual subscriber and group database fault recovery;
• authentication, one-directionally or mutually between the individual subscriber and the home SwMI;
• Over-The-Air-Re-keying (OTAR) for Static Cipher Key (SCK) generation and SCK delivery.
For the following service only the stage 1 descriptions are included:
• linking/unlinking of groups.
- Standard423 pagesEnglish languagesale 10% offe-Library read for1 day
The present document specifies the stage 3 description of the Supplementary Service Talking Party Identification (SS-TPI) for the Terrestrial Trunked Radio (TETRA). The SS-TPI supplementary service enables the party/parties participating in a call to receive the identification of the talking/sending party. The SS-TPI is activated against individual identity in individual call and against group identity in group calls.
Man-Machine Interface (MMI) and charging principles are outside the scope of the present document. The supplementary service stage 3 description is preceded by the stage 1 and the stage 2 description of the service, according to the method described in ITU-T Recommendation I.130 [10]. The stage 1 description specifies the service
from the user's point of view. The stage 2 description identifies the functional capabilities and the information flows needed to support the supplementary service as specified in its stage 1 description. The present stage 3 description specifies the protocols at the air interface and at the various Inter-System Interfaces (ISI) to support SS-TPI.
NOTE: According to ITU-T Recommendation I.130 [10], the stage 3 description of any telecommunication service addresses the network implementation aspects. Consequently it comprises two steps: the specifications of all protocols at the various reference points involved in any of the service procedures (notably the service operation) are the first step of the stage 3 description, and the specifications of the functions of the corresponding network entities are its second step. The latter have not been provided since they can be derived from the specification of the functional entity actions in the stage 2 description.
The present document is applicable to Voice plus Data individual call or group call; more specifically to the following entities:
• the MS/LS of listening/receiving users during an individual call or a group call;
• to the originating Switching and Management Infrastructures (SwMIs) in an individual call or a group call;
• to the group home SwMI and the participating SwMI for a group call;
• to the terminating SwMI for an individual call;
• and, optionally, to the home SwMI of the group or of the MS/LSs involved, for managing the supplementary service.
- Standard88 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-03144
- Standard178 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-08064
- Standard200 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-03130
- Standard54 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-03099
- Standard88 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-03089
- Standard423 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-03086
- Standard138 pagesEnglish languagesale 10% offe-Library read for1 day
REN/TETRA-03091
- Standard52 pagesEnglish languagesale 10% offe-Library read for1 day
To provide basic inter-working of TETRA systems in support of user mobility.
- Standard429 pagesEnglish languagesale 10% offe-Library read for1 day
Protocol conformance testing (TTCN) for mobile stations to be used for Direct Mode operation
- Standard34 pagesEnglish languagesale 10% offe-Library read for1 day
To define the SDL model of the TETRA air interface for PDO.
- Standard9 pagesEnglish languagesale 10% offe-Library read for1 day
Protocol conformance testing (TTCN) for mobile stations to be used for Direct Mode operation
- Standard46 pagesEnglish languagesale 10% offe-Library read for1 day
Protocol conformance testing (TTCN) for mobile stations to be used for Direct Mode operation
- Standard44 pagesEnglish languagesale 10% offe-Library read for1 day
Protocol conformance testing (TTCN) for mobile stations to be used for Direct Mode operation
- Standard42 pagesEnglish languagesale 10% offe-Library read for1 day
To define the technical requirements for DMO gateways.
- Standard262 pagesEnglish languagesale 10% offe-Library read for1 day
To define the Stage 3 requirements for TETRA SS Talking Party Number
- Standard91 pagesEnglish languagesale 10% offe-Library read for1 day
To define the PICS proforma for PDO.
- Standard32 pagesEnglish languagesale 10% offe-Library read for1 day
To define the ISDN gateway and give access to the Public networks for TETRA users
- Standard95 pagesEnglish languagesale 10% offe-Library read for1 day
Protocol conformance testing (TTCN) for mobile stations to be used for Direct Mode operation
- Standard30 pagesEnglish languagesale 10% offe-Library read for1 day
Maintenance of the base standard for Voice plus Data
- Standard784 pagesEnglish languagesale 10% offe-Library read for1 day
Protocol conformance testing (TTCN) for mobile stations to be used for Direct Mode operation
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
Protocol conformance testing (TTCN) for mobile stations to be used for Direct Mode operation
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
To define the requirements of TETRA SS Talking Party Identification
- Standard36 pagesEnglish languagesale 10% offe-Library read for1 day