iTeh Standards logo
EURUSD
Your shopping cart is empty.

M/001 - Total gaseous Organic Carbon

Mandate given to CEN concerning a standard for a reference method allowing the calibration of automated measurement systems for Total gaseous Organic Carbon (TOC) and main performance characteristics for the automated measurement systems

General Information

Organization
CEN - CEN European Committee for Standardization

Frequently Asked Questions

A European Standardization Mandate is a formal request from the European Commission to the European Standardization Organizations (CEN, CENELEC, and ETSI) to develop European standards (ENs) in support of EU legislation and policies. Mandates are issued under Regulation (EU) No 1025/2012 and help ensure that products and services meet the essential requirements set out in EU directives and regulations.

M/001 is a European Standardization Mandate titled "Mandate given to CEN concerning a standard for a reference method allowing the calibration of automated measurement systems for Total gaseous Organic Carbon (TOC) and main performance characteristics for the automated measurement systems". Mandate given to CEN concerning a standard for a reference method allowing the calibration of automated measurement systems for Total gaseous Organic Carbon (TOC) and main performance characteristics for the automated measurement systems There are 8 standards developed under this mandate.

Standards developed in response to a mandate and cited in the Official Journal of the European Union become "harmonized standards". Products manufactured in compliance with harmonized standards benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation, facilitating CE marking and market access across the European Economic Area.

Standardization Organization
ICS
Technical Committee
Directive
50
CEN
EN 13877-3:2004(Main)
Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements
SIST EN 13877-3:2005

This document specifies the requirements for dowels to be used in cast "in situ" concrete pavements for roads, airfields and other trafficked areas.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN 13877-3:2005(Main)
Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements
EN 13877-3:2004

This document specifies the requirements for dowels to be used in cast "in situ" concrete pavements for roads, airfields and other trafficked areas.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
CEN
EN 13649:2001(Main)
Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method
SIST EN 13649:2002

This European Standard specifies procedures for the sampling onto activated carbon, the preparation and the analysis of samples of volatile organic components such as those arising from solvent using processes. It can be used as a reference method.
NOTE   See Council Directive 1999/13/EEC.
The results obtained using this Standard are expressed as the mass concentration (mg/m3) of the individual gaseous organic components. This Standard is suitable for use in the range of about 0,5 mg/m3 to 2000 mg/m3.
For the measurement of the mass concentration of total organic carbon arising from solvent using processes then EN 13526 should be used.

  • Standard
    21 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN 13649:2002(Main)
Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method
EN 13649:2001

This European Standard specifies procedures for the sampling onto activated carbon, the preparation and the analysis of samples of volatile organic components such as those arising from solvent using processes. It can be used as a reference method.
NOTE   See Council Directive 1999/13/EEC.
The results obtained using this Standard are expressed as the mass concentration (mg/m3) of the individual gaseous organic components. This Standard is suitable for use in the range of about 0,5 mg/m3 to 2000 mg/m3.
For the measurement of the mass concentration of total organic carbon arising from solvent using processes then EN 13526 should be used.

  • Standard
    21 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN 13526:2002(Main)
Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method
EN 13526:2001

This European Standard specifies a set of minimum performance requirements for an instrument using flame ionisation detection, together with procedures for its calibration and operation, for the measurement of the mass concentration of total gaseous organic carbon (TOC) in flue gases.
This European Standard is suitable for the measurement of gaseous or vapour phase TOC emissions from Solvent Using Processes.
NOTE 1   See Council Directive 1999/13/EEC.
The results obtained using this standard are expressed in milligrams per cubic metre as total carbon (mg/m3). This standard is suitable for the measurement of concentrations from 20 mg/m3 to 500 mg/m3 but can be used at lower concentrations.
NOTE 2   By its nature a flame ionisation detector (FID) can also be used to measure higher concentrations.
The method specified in this European Standard can be used as a reference method or, with suitable minimum operational requirements, for continuous monitoring.  It can also be used for the calibration of automated measuring systems.  An indication of the uncertainty of the measurement is shown in annex A.

  • Standard
    22 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN 12619:2000(Main)
Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method
EN 12619:1999

This European Standard specifies a set of minimum performance requirements for an instrument using flame ionisation detection, together with procedures for its calibration and operation, for the measurement of the mass concentration of total gaseous organic carbon (TOC) in stationary source combustion emissions. This European Standard is suitable for the measurements of low level gaseous or vapour phase TOC emissions such as those from municipal waste incinerators and hazardous Waste incinerators.

  • Standard
    19 pages
    English language
    e-Library read for
    1 day
CEN
EN 13526:2001(Main)
Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method
SIST EN 13526:2002

This European Standard specifies a set of minimum performance requirements for an instrument using flame ionisation detection, together with procedures for its calibration and operation, for the measurement of the mass concentration of total gaseous organic carbon (TOC) in flue gases.
This European Standard is suitable for the measurement of gaseous or vapour phase TOC emissions from Solvent Using Processes.
NOTE 1   See Council Directive 1999/13/EEC.
The results obtained using this standard are expressed in milligrams per cubic metre as total carbon (mg/m3). This standard is suitable for the measurement of concentrations from 20 mg/m3 to 500 mg/m3 but can be used at lower concentrations.
NOTE 2   By its nature a flame ionisation detector (FID) can also be used to measure higher concentrations.
The method specified in this European Standard can be used as a reference method or, with suitable minimum operational requirements, for continuous monitoring.  It can also be used for the calibration of automated measuring systems.  An indication of the uncertainty of the measurement is shown in annex A.

  • Standard
    22 pages
    English language
    e-Library read for
    1 day
CEN
EN 12619:1999(Main)
Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method
SIST EN 12619:2000

This European Standard specifies a set of minimum performance requirements for an instrument using flame ionisation detection, together with procedures for its calibration and operation, for the measurement of the mass concentration of total gaseous organic carbon (TOC) in stationary source combustion emissions. This European Standard is suitable for the measurements of low level gaseous or vapour phase TOC emissions such as those from municipal waste incinerators and hazardous Waste incinerators.

  • Standard
    19 pages
    English language
    e-Library read for
    1 day
50