SIST EN 14069:2018

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kalkdünger - Beschreibung, Spezifizierung und KennzeichnungAmendements minéraux basiques - Dénominations, spécifications et étiquetageLiming materials - Denominations, specifications and labelling65.080GnojilaFertilizersICS:Ta slovenski standard je istoveten z:EN 14069:2017SIST EN 14069:2018en01-januar-2018SIST EN 14069:2018SLOVENSKI
STANDARDSIST EN 14069:20041DGRPHãþD



SIST EN 14069:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14069
November
t r s y ICS
x wä r z r Supersedes EN
s v r x {ã t r r uEnglish Version
Liming materials æ Denominationsá specifications and labelling Amendements minéraux basiques æ Dénominationsá spécifications et étiquetage
Kalkdünger æ Beschreibungá Spezifizierung und Kennzeichnung This European Standard was approved by CEN on
t July
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v r x {ã t r s y ESIST EN 14069:2018



EN 14069:2017 (E) 2 Contents Page
European foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 6 4 Denominations and specifications for liming materials . 6 5 Analytical methods . 23 6 Tolerances . 23 6.1 General . 23 6.2 Material passing a specific sieve . 23 7 Use of terms . 23 8 Declaration . 24 Bibliography . 26
SIST EN 14069:2018



EN 14069:2017 (E) 3 European foreword This document (EN 14069:2017) has been prepared by Technical Committee CEN/TC 260 “Fertilizers and liming materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2018, and conflicting national standards shall be withdrawn at the latest by May 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14069:2003. In comparison with the previous edition, the following changes have been made: a) the minimum requirements laid down in Regulation (EC) No 463/2013 [2] amending Regulation (EC) No 2003/2003 [1] concerning liming materials have been taken into account; b) references to analytical methods extended; c) the requirements are specified for products of standard quality and for fine quality products (see Table 1 to Table 6); d) requirements concerning oxide and hydroxide limes of natural origin added (see Table 2); e) requirements concerning silicate limes added (see Table 4); f) requirements concerning mixed limes added (see Table 5); g) requirements concerning mixtures of liming materials with other EC fertilizer types added (see Table 6); h) requirements for declaration and labelling extended according to Regulation (EC) No 463/2013 [2]; i) editorially revised. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 14069:2018



EN 14069:2017 (E) 4 Introduction Throughout the member countries of CEN, regular liming to regulate the soil pH level and to neutralize the effect of soil acidification is a well-established and essential agricultural operation on all soils in humid climates and under all systems of agricultural cultivation. Liming improves soil fertility and supplies essential plant nutrients. Liming materials are also used in forest liming, lake liming and the liming of water catchment areas. A wide range of natural geological deposits of liming materials is found in all member countries of CEN. Some industrial processes produce materials acceptable as liming products. This very wide range of material differs substantially in both chemical and physical properties. The use of these various materials will vary according to the type of material. Still, this standard specifies the main properties of the liming materials used in Europe. However, for the purpose of comparison of these products, it is necessary to describe and specify the minimum requirements of a liming material. In the frame of the 1st revision of this European Standard the minimum requirements laid down in Regulation (EC) No 463/2013 [2] amending Regulation (EC) No 2003/2003 [1] concerning liming materials have been taken into account. Liming materials in Europe show a large diversity due to factors as climate and type of crops, production, transport, storing and spreading of lime adapted to regional conditions. Standard quality covers these varying liming materials, whilst Fine quality credits rapidly dissolving materials needed for certain specialized agricultural productions or to allow the dissolution of the liming material in some soil types having a higher pH value in a rapid and controlled way. SIST EN 14069:2018



EN 14069:2017 (E) 5 1 Scope This European Standard describes and specifies the requirements of products of natural origin and products from industrial processes of basic and fine quality to be used as liming materials in agriculture for raising the pH of soil (and water). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12048, Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying at (105 +/- 2)°C (ISO 8190:1992, modified) EN 12944-1, Fertilizers and liming materials and soil improvers - Vocabulary - Part 1: General terms EN 12944-3, Fertilizers and liming materials - Vocabulary - Part 3: Terms relating to liming materials EN 12945, Liming materials - Determination of neutralizing value - Titrimetric methods EN 12946, Liming materials - Determination of calcium content and magnesium content - Complexometric method EN 12947, Liming materials - Determination of magnesium content - Atomic absorption spectrometric method EN 12948, Liming materials - Determination of size distribution by dry and wet sieving EN 13475, Liming materials - Determination of calcium content - Oxalate method EN 13971, Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid EN 14397-2, Fertilizers and liming materials - Determination of carbon dioxide - Part 2: Method for liming materials EN 14984, Liming materials - Determination of product effect on soil pH - Soil incubation method EN 15704, Liming materials - Determination of the breakdown of granulated calcium and calcium/magnesium carbonates under the influence of water EN 16357, Carbonate liming materials - Determination of reactivity - Automatic titration method with citric acid ISO 6598, Fertilizers — Determination of phosphorus content — Quinoline phosphomolybdate gravimetric method ISO 7497, Fertilizers — Extraction of phosphates soluble in mineral acids SIST EN 14069:2018



EN 14069:2017 (E) 6 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12944-1 and EN 12944-3 apply. 4 Denominations and specifications for liming materials The denominations (type designations), specifications and elements to be declared are specified in Table 1 to Table 6 as follows: — Table 1: Natural limes — Table 2: Oxide and hydroxide limes of natural origin — Table 3: Limes from industrial processes — Table 4: Silicate limes — Table 5: Mixed limes — Table 6: Mixtures of liming materials with other EC fertilizer types Granulated liming materials which are produced by aggregating smaller primary particles shall break down when stirred in water into particles with fineness distributions as specified in the type descriptions, and as measured using the method specified in EN 15704. All the properties mentioned in the Table 1 to Table 6 refer to the product as supplied unless otherwise specified. All the neutralizing requirements are expressed as CaO-equivalent and as HO--equivalent in brackets. For mixed limes other than specified in Table 5, users of these products shall check the compliance of these products with the national regulations for agricultural liming materials. For products obtained by mixing, the type designation shall be completed by the list of the components with the maximum of three types. In case of mixtures of raw materials containing dolomite for common grinding, the final mixed product shall be finer than 97 % at 1,5 mm. SIST EN 14069:2018



EN 14069:2017 (E) 7 Table 1 — Natural limes Type designation Data on method of production and essential ingredients Minimum content of nutrients as supplied (percentage by mass) Data on the expression of nutrients Other requirements Other data on the type designation Nutrient content to be declared as supplied Forms and solubility of the nutrients in dry matter Other criteria to be declared Methods of determination Limestone – standard quality Product or mixture of products of Table 1 containing as its essential ingredient calcium carbonate, obtained by grinding of natural deposits of limestone Minimum Neutralizing Value: 42 as CaO (25,5 as HO-) Fineness determined by
sieving: – at least 97 % to pass through a 3,15 mm sieve and – at least 70 % to pass through a 1 mm sieve and – at least 50 % to pass through a 0,5 mm sieve. Usual trade names or alternative names may be added. Neutralizing Value (EN 12945) Total calcium (EN 12946 or EN 13475) Total magnesium (optional) (EN 12946 or EN 12947) Wet product (if moisture content > 2 % (EN 12048)) Fineness determined by
sieving (EN 12948) Reactivity and method of determination (optional) (EN 13971, EN 16357, EN 14984)
Limestone – fine quality Minimum Neutralizing Value: 50 as CaO (30,3 as HO-) Fineness determined by sieving: – at least 97 % to pass through a 2 mm sieve and – at least 80 % to pass through a 1 mm sieve and – at least 50 % to pass through a 0,315 mm sieve and – at least 30 % to pass through a 0,1 mm sieve. Usual trade names or alternative names may be added. SIST EN 14069:2018



EN 14069:2017 (E) 8 Type designation Data on method of production and essential ingredients Minimum content of nutrients as supplied (percentage by mass) Data on the expression of nutrients Other requirements Other data on the type designation Nutrient content to be declared as supplied Forms and solubility of the nutrients in dry matter Other criteria to be declared Methods of determination Magnesian limestone – standard quality Product or mixture of products of Table 1 containing as its essential ingredients calcium carbonate and magnesium carbonate, obtained by grinding of natural deposits of magnesian limestone Minimum Neutralizing Value: 45 as CaO (27,3 as HO-) Total magnesium:
· 3
¨ MgO to ª
s t % MgO Fineness determined by
sieving: – at least 97 % to pass through a 3,15 mm sieve and – at least 70 % to pass through a 1 mm sieve and – at least 50 % to pass through a 0,5 mm sieve. Usual trade names or alternative names may be added. Neutralizing Value (EN 12945) Total calcium (EN 12946 or EN 13475) Total magnesium (EN 12946 or EN 12947) Wet product (if moisture content > 2 % (EN 12048)) Fineness determined by
sieving (EN 12948) Reactivity and method of determination (optional) (EN 13971, EN 16357, EN 14984)
Magnesian limestone – fine quality Minimum Neutralizing Value: 52 as CaO (31,5 as HO-) Total magnesium:
· 3
¨ MgO to ª
s t % MgO Fineness determined by
sieving: – at least 97 % to pass through a 2 mm sieve and – at least 80 % to pass through a 1 mm sieve and – at least 50 % to pass through a 0,315 mm sieve and – at least 30 % to pass through a 0,1 mm sieve. Usual trade names or alternative names may be added. SIST EN 14069:2018



EN 14069:2017 (E) 9 Type designation Data on method of production and essential ingredients Minimum content of nutrients as supplied (percentage by mass) Data on the expression of nutrients Other requirements Other data on the type designation Nutrient content to be declared as supplied Forms and solubility of the nutrients in dry matter Other criteria to be declared Methods of determination Dolomitic limestone – standard quality Product or mixture of products of Table 1 containing as its essential ingredients calcium carbonate and magnesium carbonate, obtained by grinding of natural deposits of dolomite Minimum Neutralizing Value: 48 as CaO (29,1 as HO-) Total magnesium:
· 12 % MgO Fineness determined by
sieving: – at least 97 % to pass through a 3,15 mm sieve and – at least 70 % to pass through a 1 mm sieve and – at least 50 % to pass through a 0,5 mm sieve. Usual trade names or alternative names may be added. Neutralizing Value (EN 12945) Total calcium (EN 12946 or EN 13475) Total magnesium (EN 12946 or EN 12947) Wet product (if moisture content > 2 % (EN 12048)) Fineness determined by
sieving (EN 12948) Reactivity and method of determination (optional) (EN 13971, EN 16357, EN 14984)
Dolomitic limestone – fine quality Minimum Neutralizing Value: 54 as CaO (32,8 as HO-) Total magnesium:
· 12 % MgO Fineness determined by
sieving: – at least 97 % to pass through a 2 mm sieve and – at least 80 % to pass through a 1 mm sieve and – at least 50 % to pass through a 0,315 mm sieve and – at least 30 % to pass through a 0,1 mm sieve. Usual trade names or alternative names may be added. SIST EN 14069:2018



EN 14069:2017 (E) 10 Type designation Data on method of production and essential ingredients Minimum content of nutrients as supplied (percentage by mass) Data on the expression of nutrients Other requirements Other data on the type designation Nutrient content to be declared as supplied Forms and solubility of the nutrients in dry matter Other criteria to be declared Methods of determination Marine limestone – standard quality Product or mixture of products of Table 1 containing as its essential ingredient calcium carbonate, obtained by grinding of natural deposits of limestone of marine origin. Minimum Neutralizing Value: 30 as CaO (18,2 as HO-) Fineness determined by
sieving: – at least 97 % to pass through a 3,15 mm sieve and – at least 70 % to pass through a 1 mm sieve.
Usual trade names or alternative names may be added. Neutralizing Value (EN 12945) Total calcium (EN 12946 or EN 13475) Total magnesium (optional) (EN 12946 or EN 12947) Wet product (if moisture content > 2 % (EN 12048)) Fineness determined by
sieving (EN 12948) Reactivity and method of determination (optional) (EN 13971, EN 16357, EN 14984)
Marine limestone – fine quality Minimum Neutralizing Value: 40 as CaO (24,3 as HO-) Fineness determined by
sieving: – at least 97 % to pass through a 2 mm sieve and – at least 80 % to pass through a 1 mm sieve and – at least 50 % to pass through a 0,315 mm sieve and – at least 30 % to pass through a 0,1 mm sieve.
Usual trade names or alternative names may be added. Chalk – standard quality Product or mixture of products of Table 1 containing as its essential ingredient calcium carbonate, obtained by grinding of natural deposits of chalk Minimum Neutralizing Value: 42 as CaO (25,5 as HO-)
Fineness determined by wet sieving: – at least 97 % to pass through a 25 mm sieve and – at least 30 % to pass through a 2 mm sieve. See 7.2 about chalk Usual trade names or alternative names may be added. Neutralizing Value (EN 12945) Total calcium (EN 12946 or EN 13475) Total magnesium (optional) (EN 12946 or EN 12947) Wet product (if moisture SIST EN 14069:2018



EN 14069:2017 (E) 11 Type designation Data on method of production and essential ingredients Minimum content of nutrients as supplied (percentage by mass) Data on the expression of nutrients Other requirements Other data on the type designation Nutrient content to be declared as supplied Forms and solubility of the nutrients in dry matter Other criteria to be declared Methods of determination Chalk – fine quality Minimum Neutralizing Value: 48 as CaO (29,1 as HO-)
Fineness determined by wet sieving: – at least 97 % to pass through a 10 mm sieve and – at least 50 % to pass through a 1,6 mm sieve. See 7.2 about chalk Usual trade names or alternative names may be added. content > 2 % (EN 12048)) Fineness determined by wet sieving (EN 12948) Reactivity and method of determination (optional) (EN 13971, EN 16357, EN 14984) Carbonate suspension Product or mixture of products of Table 1 containing as its essential ingredients calcium carbonate and/or magnesium carbonate, obtained by grinding and suspending in water of natural deposits of limestone, magnesian limestone, dolomite or chalk. Minimum Neutralizing Value: 35 as CaO (21,2 as HO-) Fineness determined by wet sieving: – at least 97 % to pass through a 2 mm sieve and – at least 80 % to pass through a 1 mm sieve and – at least 50 % to pass through a 0,315 mm sieve and – at least 30 % to pass through a 0,1 mm sieve. Usual trade names or alternative names may be added. Neutralizing Value (EN 12945) Total calcium (EN 12946 or EN 13475) Total magnesium if MgO
· 3 % (EN 12946 or EN 12947) Moisture content (EN 12048) Fineness determined by wet sieving (EN 12948) Reactivity and method of determination (optional) (EN 13971, EN 16357, EN 14984)
SIST EN 14069:2018



EN 14069:2017 (E) 12 Table 2 — Oxide and hydroxide limes of natural origin Type designation Data on method of production and essential ingredients Minimum content of nutrients as supplied (percentage by mass) Data on the expression of nutrients Other requirements Other data on the type designation Nutrient content to be declared as supplied Forms and solubility of the nutrients in dry matter Other criteria to be declared Methods of determination Burnt lime – standard quality Product or mixture of products of Table 2 containing as its essential ingredient calcium oxide obtained by burning of natural deposits of limestone.
Minimum Neutralizing Value: 75 as CaO (45,5 as HO-) Fineness determined by dry sieving: crushed: – at least 97 % to pass through a 4 mm sieve. screened: – at least 97 % to pass through a 8 mm sieve and – no more than 5 % to pass through a 0,4 mm sieve. The type designation shall include the fineness type 'crushed' or 'screened'. Usual trade names or alternative names may be added. Neutralizing Value (EN 12945) Total calcium (EN 12946 or EN 13475) Total magnesium (optional) (EN 12946 or EN 12947) Fineness determined by dry sieving (optional) (EN 12948) Soil incubation results (optional) (EN 14984) Burnt lime – fine quality Minimum Neutralizing Value: 85 as CaO (51,6 as HO-) Fineness determined by dry sieving: crushed: – at least 97 % to pass through a 4 mm sieve. screened: – at least 97 % to pass through a 8 mm sieve and – no more than 5 % to pass through a 0,4 mm sieve. The type designation shall include the fineness type 'crushed' or 'screened'. Usual trade names or alternative names may be added. SIST EN 14069:2018



EN 14069:2017 (E) 13 Type designation Data on method of production and essential ingredients Minimum content of nutrients as supplied (percentage by mass) Data on the expression of nutrients Other requirements Other data on the type designation Nutrient content to be declared as supplied Forms and solubility of the nutrients in dry matter Other criteria to be declared Methods of determination Magnesian burnt lime – standard quality Product or mixture of products of Table 2 containing as its essential ingredients calcium oxide and magnesium oxide, obtained by burning of natural deposits of magnesian limestone.
Minimum Neutralizing Value: 80 as CaO (48,5 as HO-)
Total magnesium:
· 7
¨ MgO ª 17 % Fineness determined by dry sieving: crushed: – at least 97 % to pass through a 4 mm sieve. screened: – at least 97 % to pass through a 8 mm sieve and – no more than 5 % to pass through a 0,4 mm sieve. The type designation shall include the fineness type 'crushed' or 'screened'. Usual trade names or alternative names may be added. Neutralizing Value (EN 12945) Total calcium (EN 12946 or EN 13475) Total magnesium (EN 12946 or EN 12947) Fineness determined by dry sieving (optional) (EN 12948) Soil incubation results (optional) (EN 14984) Magnesian burnt lime – fine quality Minimum Neutralizing Value: 85 as CaO (51,6 as HO-)
Total magnesium:
· 7
¨ MgO ª 17 % Fineness determined by dry sieving: crushed: – at least 97 % to pass through a 4 mm sieve. screened: – at least 97 % to pass through a 8 mm sieve and – no more than 5 % to pass through a 0,4 mm sieve. The type designation shall include the fineness type 'crushed' or 'screened'. Usual trade names or alternative names may be added. SIST EN 14069:2018



EN 14069:2017 (E) 14 Type designation Data on method of production and essential ingredients Minimum content of nutrients as supplied (percentage by mass) Data on the expression of nutrients Other requirements Other data on the type designation Nutrient content to be declared as supplied Forms and solubility of the nutrients in dry matter Other criteria to be declared Methods of determination Dolomitic burnt lime – standard quality Product or mixture of products of Table 2 containing as its essential ingredients calcium oxide and magnesium oxide, obtained by burning of natural deposits of dolomite.
Minimum Neutralizing Value: 85 as CaO (51,6 as HO-)
Total magnesium:
· 17 % MgO Fineness determined by dry sieving: crushed: – at least 97 % to pass through a 4 mm sieve. screened: – at least 97 % to pass through a 8 mm sieve and – no more than 5 % to pass through a 0,4 mm sieve. The type designation shall include the fineness type 'crushed' or 'screened'. Usual trade names or alternative names may be added. Neutralizing Value (EN 12945) Total calcium (EN 12946 or EN 13475) Total magnesium (EN 12946 or EN 12947) Fineness determined by dry sieving (optional) (EN 12948) Soil incubation results (optional) (EN 14984) Dolomitic burnt lime – fine quality Minimum Neutralizing Value: 95 as CaO (57,6 as HO-)
Total magnesium:
· 17 % MgO Fineness determined by dry sieving: crushed: – at least 97 % to pass through a 4 mm sieve. screened: – at least 97 % to pass through a 8 mm sieve and – no more than 5 % to pass through a 0,4 mm sieve. The type designation shall include the fineness type 'crushed' or 'screened'. Usual trade names or alternative names may be added. SIST EN 14069:2018



EN 14069:2017 (E) 15 Type designation Data on method of production and essential ingredients Minimum content of nutrients as supplied (percentage by mass) Data on the expression of nutrients Other requirements Other data on the type designation Nutrient content to be declared as supplied Forms and solubility of the nutrients in dry matter Other criteria to be declared Methods of determination Hydrated burnt lime (slaked lime) Product or mixture of products of Table 2 containing as its essential ingredients calcium hydroxide, obtained by burning and slaking of natural deposits of limestone. Minimum Neutralizing Value: 65 as CaO (39,4 as HO-) Fineness determined by dry sieving: – at least 95 % to pass through a 0,160 mm sieve. Usual trade names or alternative names may be added. Neutralizing Value (EN 12945) Total calcium (EN 12946 or EN 13475) Total magnesium (optional) (EN 12946 or EN 12947) Fineness determined by dry sieving (optional) (EN 12948) Soil incubation results (optional) (EN 14984) Hydrated magnesian burnt lime (slaked magnesian lime) Product or mixture of products of Table 2 containing as its essential ingredients calcium hydroxide and magnesium hydroxide, obtained by burning and slaking of natural deposits of magnesian limestone. Minimum Neutralizing Value: 70 as CaO (42,5 as HO-) Total magnesium: 5 % MgO Fineness determined by dry sieving: – at least 95 % to pass through a 0,160 mm sieve. Usual trade names or alternative names may be added. Neutralizing Value (EN 12945) Total calcium (EN 12946 or EN 13475) Total magnesium (EN 12946 or EN 12947) Fineness determined by dry sieving (optional) (EN 12948) Soil incubation results (optional) (EN 14984) Hydrated dolomitic burnt lime Product or mixture of products of Table 2 containing as its essential ingredients calcium hydroxide and magnesium hydroxide, obtained by burning and slaking, of natural deposits of dolomite. Minimum Neutralizing Value: 70 as CaO (42,5 as HO-) Total magnesium: 12 % MgO Fineness determined by dry sieving: – at least 95 % to pass through a 0,160 mm sieve. Usual trade names or alternative names may be added. Neutralizing Value (EN 12945) Total calcium (EN 12946 or EN 13475) Total magnesium (EN 12946 or EN 12947) Fineness determined by dry sieving (optional) (EN 12948) Soil incubation results (optional) (EN 14984) SIST EN 14069:2018



EN 14069:2017 (E) 16 Type designation Data on method of production and essential ingredients Minimum content of nutrients as supplied (percentage by mass) Data on the expression of nutrients Other requirements Other data on the type designation Nutrient content to be declared as supplied Forms and solubility of the nutrients in dry matter Other criteria to be declared Methods of determination Hydrated lime suspension Product or mixture of products of Table 2 containing as its essential ingredients calcium hydroxide and/or magnesium hydroxide, obtained by burning, slaking and suspending in water of natural deposits of limestone, magnesian limestone or dolomite. Minimum Neutralizing Value: 20 as CaO (12,1 as HO-) Fineness determined by wet sieving: – at least 95 % to pass through a 0,160 mm sieve. Usual trade names or alternative names may be added. Neutralizing Value (EN 12945) Total calcium (EN 12946 or EN 13475) Total magnesium if MgO
· 3 % (EN 12946 or EN 12947) Moisture content (EN 12049) Fineness determined by wet sieving (optional) (EN 12948) Soil incubation results (optional) (EN 14984) SIST EN 14069:2018



EN 14069:2017 (E) 17 Table 3 — Limes from industrial processes Type designation Data on method of production and essential ingredients Minimum content of nutrients as supplied (percentage by mass) Data on the expression of nutrients Other requirements Other data on the type designation Nutrient content to be declared as supplied Forms and solubility of the nutrients in dry matter Other criteria to be declared Methods of determination Sugar factory lime Product from sugar production obtained by carbonation using exclusively burnt lime from natural sources and containing as essential ingredient finely divided calcium carbonate. Minimum Neutralizing Value: 20 as CaO (12,1 as HO-)
Usual trade names or alternative names may be added. Neutralizing Value (EN 12945) Tota
...