SIST EN 60519-3:2005
(Main)Safety in electroheat installations -- Part 3: Particular requirements for induction and conduction heating and induction melting installations
Safety in electroheat installations -- Part 3: Particular requirements for induction and conduction heating and induction melting installations
Consists of requirements common to both induction and conduction heating installations and induction melting installations, and specific requirements for induction and conduction heating installations, and specific requirements for induction melting installations.
Sicherheit in Elektrowärmeanlagen -- Teil 3: Besondere Anforderungen an induktive und konduktive Erwärmungsanlagen und an Induktionsschmelzanlagen
Sécurité dans les installations électrothermiques -- Partie 3: Règles particulières pour les installations de chauffage par induction et par conduction et pour les installations de fusion par induction
Comprend des exigences communes à la fois aux installations de chauffage par induction et par conduction et aux installations de fusion par induction, des exigences spécifiques pour les installations de chauffage par induction et par conduction, et des exigences spécifiques pour les installations de fusion par induction.
Varnost električnih grelnih inštalacij - 3. del: Posebne zahteve za inštalacije za indukcijsko in kondukcijsko segrevanje ter inštalacije za indukcijsko taljenje (IEC 60519-3:2005)
General Information
- Status
- Published
- Publication Date
- 31-Aug-2005
- Technical Committee
- I09 - Imaginarni 09
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Sep-2005
- Due Date
- 01-Sep-2005
- Completion Date
- 01-Sep-2005
Relations
- Effective Date
- 01-Apr-2008
Overview
EN 60519-3:2005 - Safety in electroheat installations, Part 3 - sets out the particular safety requirements for induction and conduction heating and for induction melting installations. Published by CENELEC and aligned with IEC 60519-3:2005, this part is intended to be used together with EN 60519-1:2003 (general requirements). It covers requirements that are common to both types of installations and adds specific provisions for each technology, reflecting updated definitions and an extended scope to include higher-voltage equipment (voltage band 3).
Key topics and requirements
- Scope and structure
- Requirements common to induction/conduction heating and induction melting installations.
- Specific requirements for induction and conduction heating installations.
- Specific requirements for induction melting installations.
- Electrical safety and protection
- Measures to reduce risks associated with high-power electroheat equipment, including protection against electric shock and safe design of power circuits.
- Components and system elements
- Guidance related to key components used in induction systems (for example, power capacitors and series capacitors are referenced via IEC standards).
- Terminology and definitions
- Definitions are aligned with IEC 60050-841 (industrial electroheat vocabulary) to ensure consistent interpretation across installations and documentation.
- Voltage band considerations
- Incorporates the extended scope from EN 60519-1 to cover voltage band 3 equipment (rated voltages up to 3 600 V AC or 5 000 V DC).
- Normative references
- Cross-references important standards (IEC 60110-1 for power capacitors, IEC 60143-1 for series capacitors, IEC 60364-4-41 for protection against electric shock, and EN/IEC 60519-1).
Applications and users
- Who uses this standard
- Electrical and mechanical engineers designing industrial heating systems.
- Manufacturers of induction and conduction heaters, induction melting furnaces, and associated components.
- Plant safety officers, installation contractors, testing laboratories, and regulatory compliance teams.
- Typical applications
- Metalworking (hardening, annealing, brazing), foundries and induction melting operations, heat-treatment lines, industrial process heating where induction or conduction heating is employed.
- Practical value
- Ensures consistency in safety measures, helps meet regulatory and national implementation requirements, supports risk reduction for high-power electroheat installations.
Related standards
- EN/IEC 60519-1:2003 - Safety in electroheat installations - General requirements
- IEC 60050-841 - International electrotechnical vocabulary (industrial electroheat)
- IEC 60110-1 / EN 60110-1 - Power capacitors for induction heating
- IEC 60143-1 / EN 60143-1 - Series capacitors for power systems
- IEC 60364-4-41 - Electrical installations of buildings - Protection against electric shock
Keywords: EN 60519-3:2005, safety in electroheat installations, induction heating standard, conduction heating, induction melting, IEC 60519-3, industrial electroheat, electrical safety, power capacitors.
Frequently Asked Questions
SIST EN 60519-3:2005 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Safety in electroheat installations -- Part 3: Particular requirements for induction and conduction heating and induction melting installations". This standard covers: Consists of requirements common to both induction and conduction heating installations and induction melting installations, and specific requirements for induction and conduction heating installations, and specific requirements for induction melting installations.
Consists of requirements common to both induction and conduction heating installations and induction melting installations, and specific requirements for induction and conduction heating installations, and specific requirements for induction melting installations.
SIST EN 60519-3:2005 is classified under the following ICS (International Classification for Standards) categories: 25.180.10 - Electric furnaces. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 60519-3:2005 has the following relationships with other standards: It is inter standard links to SIST EN 60519-3:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 60519-3:2005 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 2014/35/EU, 73/23/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 60519-3:2005 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI SIST EN 60519-3:2005
STANDARD
september 2005
Varnost električnih grelnih inštalacij – 3. del: Posebne zahteve za inštalacije
za indukcijsko in kondukcijsko segrevanje ter inštalacije za indukcijsko
taljenje (IEC 60519-3:2005)
Safety in electroheat installations – Part 3: Particular requirements for induction and
conduction heating and induction melting installations (IEC 60519-3:2005)
ICS 25.180.10 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 60519-3
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2005
ICS 25.180.10 Supersedes EN 60519-3:1995
English version
Safety in electroheat installations
Part 3: Particular requirements for induction and conduction heating
and induction melting installations
(IEC 60519-3:2005)
Sécurité dans les installations Sicherheit in Elektrowärmeanlagen
électrothermiques Teil 3: Besondere Anforderungen
Partie 3: Règles particulières pour an induktive und konduktive
les installations de chauffage Erwärmungsanlagen und an
par induction et par conduction Induktionsschmelzanlagen
et pour les installations de fusion (IEC 60519-3:2005)
par induction
(CEI 60519-3:2005)
This European Standard was approved by CENELEC on 2005-04-12. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...