SIST EN ISO 4259-1:2018/A1:2019

SLOVENSKI STANDARD
01-december-2019
Nafta in sorodni proizvodi - Natančnost merilnih metod in rezultatov - 1. del:
Določevanje natančnosti preskusnih metod - Dopolnilo A1 (ISO 4259-1:2017/DAM
1:2019)
Petroleum and related products - Precision of measurement methods and results - Part
1: Determination of precision data in relation to methods of test - Amendment 1 (ISO
4259-1:2017/Amd 1:2019)
Mineralölerzeugnisse - Präzision von Messverfahren und Ergebnissen - Teil 1:
Bestimmung der Präzisionsdaten von Prüfverfahren - Änderung (ISO 4259-1:2017/Amd
1:2019)
Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats -
Partie 1: Détermination des valeurs de fidélité relatives aux méthodes d'essai -
Amendement 1 (ISO 4259-1:2017/Amd 1:2019)
Ta slovenski standard je istoveten z: EN ISO 4259-1:2017/A1:2019
ICS:
75.080 Naftni proizvodi na splošno Petroleum products in
general
75.180.30 Oprema za merjenje Volumetric equipment and
prostornine in merjenje measurements
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 4259-1:2017/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2019
EUROPÄISCHE NORM
ICS 75.080
English Version
Petroleum and related products - Precision of
measurement methods and results - Part 1: Determination
of precision data in relation to methods of test -
Amendment 1 (ISO 4259-1:2017/Amd 1:2019)
Produits pétroliers et connexes - Fidélité des méthodes Mineralölerzeugnisse - Präzision von Messverfahren
de mesure et de leurs résultats - Partie 1: und Ergebnissen - Teil 1: Bestimmung der
Détermination des valeurs de fidélité relatives aux Präzisionsdaten von Prüfverfahren - Änderung (ISO
méthodes d'essai - Amendement 1 (ISO 4259- 4259-1:2017/Amd 1:2019)
1:2017/Amd 1:2019)
This amendment A1 modifies the European Standard EN ISO 4259-1:2017; it was approved by CEN on 5 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4259-1:2017/A1:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 4259-1:2017/A1:2019) has been prepared by Technical Committee ISO/TC 28
"Petroleum and related products, fuels and lubricants from natural or synthetic sources" in
collaboration with Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related
products of petroleum, synthetic and biological origin.” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 4259-1:2017/Amd 1:2019 has been approved by CEN as EN ISO 4259-1:2017/A1:2019
without any modification.
INTERNATIONAL ISO
STANDARD 4259-1
First edition
2017-11-01
AMENDMENT 1
2019-09
Petroleum and related products —
Precision of measurement methods
and results —
Part 1:
Determination of precision data in
relation to methods of test
AMENDMENT 1
Produits pétroliers et connexes — Fidélité des méthodes de mesure et
de leurs résultats —
Partie 1: Détermination des valeurs de fidélité relatives aux
méthodes d'essai
AMENDEMENT 1
Reference number
ISO 4259-1:2017/Amd.1:2019(E)
©
ISO 2019
ISO 4259-1:2017/Amd.1:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 4259-1:2017/Amd.1:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Stan
...