SIST EN ISO 18243:2019/A1:2020

SLOVENSKI STANDARD
SIST EN ISO 18243:2019/A1:2020
01-december-2020
Mopedi in motorna kolesa na električni pogon - Metode preskušanja in varnostne
zahteve za sisteme z litij-ionskimi baterijami - Dopolnilo A1 (ISO 18243:2017/Amd
1:2020)
Electrically propelled mopeds and motorcycles - Test specifications and safety
requirements for lithium-ion battery systems - Amendment 1 (ISO 18243:2017/Amd
1:2020)
Elektrisch angetriebene Kleinkrafträder und Motorräder - Prüfspezifikationen und
Sicherheitsanforderungen für Lithium-Ionen-Batteriesysteme - Änderung 1 (ISO
18243:2017/Amd 1:2020)
Cyclomoteurs et motocycles à propulsion électrique - Spécifications d'essai et exigences
de sécurité pour les systèmes de batterie au lithium-ion - Amendement 1 (ISO
18243:2017/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 18243:2019/A1:2020
ICS:
43.140 Motorna kolesa in mopedi Motorcycles and mopeds
SIST EN ISO 18243:2019/A1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 18243:2019/A1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 18243:2019/A1:2020


EN ISO 18243:2019/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2020
EUROPÄISCHE NORM
ICS 43.140
English Version

Electrically propelled mopeds and motorcycles - Test
specifications and safety requirements for lithium-ion
battery systems - Amendment 1 (ISO 18243:2017/Amd
1:2020)
Cyclomoteurs et motocycles à propulsion électrique - Elektrisch angetriebene Kleinkrafträder und
Spécifications d'essai et exigences de sécurité pour les Motorräder - Prüfspezifikationen und
systèmes de batterie au lithium-ion - Amendement 1 Sicherheitsanforderungen für Lithium-Ionen-
(ISO 18243:2017/Amd 1:2020) Batteriesysteme - Änderung 1 (ISO 18243:2017/Amd
1:2020)
This amendment A1 modifies the European Standard EN ISO 18243:2019; it was approved by CEN on 21 September 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18243:2019/A1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 18243:2019/A1:2020
EN ISO 18243:2019/A1:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 18243:2019/A1:2020
EN ISO 18243:2019/A1:2020 (E)
European foreword
This document (EN ISO 18243:2019/A1:2020) has been prepared by Technical Committee ISO/TC 22
"Road vehicles" in collaboration with Technical Committee CEN/TC 301 “Road vehicles” the secretariat
of which is held by AFNOR.
This Amendment to the European Standard EN ISO 18243:2019 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by March 2021, and
conflicting national standards shall be withdrawn at the latest by March 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tu
...