iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST ENV 1631:2000

(Main)

Cleanroom technology - Design, construction and operation of cleanrooms and clean air devices

Cleanroom technology - Design, construction and operation of cleanrooms and clean air devices

This European Prestandard specifies the requirements for cleanroom and clean airdevice installations. This standard applies where cleanroom technology is called for and is intended for use by purchasers, suppliers and designers, providing a check list of important performance requirements. Construction and installation guidance is provided, including requirements for commissioning and qualification. Basic requirements to ensure continued satisfactory operation are identified through the consideration of operation and maintenance; further guidance in respect of these requirements is given in Annexes A to K.

Reinraumtechnik - Planung, Ausführung und Betrieb von Reinräumen und Reinraumgeräten

Dieser Teil dieser Europäischen Norm legt die Anforderungen für Reinräume undReinraumgeräte fest. Er ist zum Gebrauch von Käufer, Lieferanten und Planern von kontaminationskontrollierten Bereichen vorgesehen und stellt eine Prüflisteder wichtigen Leistungsanforderungen zur Verfügung. Ausführung und Montageanleitungen der Anlage sind beschrieben einschließlich der Anforderungenfür eine angemessene Inbetriebnahme (Abnahme) und Validierung.

Technologies des salles propres - Conception , construction et gestion du fonctionnement des salles propres et de dispositifs de l'air propre

La présente partie de l'EN 1631 spécifie les prescriptions relatives aux salles propres et aux dispositifs a air propre. Elle s'adresse aux acheteurs, fournisseurs et concepteurs d'espaces a contamination maîtrisée, et indique lesprescriptions de performances importantes. Elle fournit des conseils relatifs a la construction et a l'équipement, et des prescriptions pour la mise en service et la validation. Le prescriptions fondamentales destinées a assurer le maintiend'un fonctionnement satisfaisant sont identifiées dans les conseils de fonctionnement et de maintenance.

Cleanroom technology - Design, construction and operation of cleanrooms and clean air devices

General Information

Status
Withdrawn
Publication Date
30-Nov-2000
Withdrawal Date
30-Apr-2004
ICS
13.040.30 - Workplace atmospheres
Technical Committee
SS SPL - Technical Board for the general field
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-May-2004
Due Date
01-May-2004
Completion Date
01-May-2004
Ref Project
ENV 1631:1996 - Cleanroom technology - Design, construction and operation of cleanrooms and clean air devices

Buy Standard

ENV 1631:2000ENV 1631:2000
PreviousNext
Standardization document
ENV 1631:2000
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 1631:2000
01-december-2000
Cleanroom technology - Design, construction and operation of cleanrooms and
clean air devices
Cleanroom technology - Design, construction and operation of cleanrooms and clean air
devices
Reinraumtechnik - Planung, Ausführung und Betrieb von Reinräumen und
Reinraumgeräten
Technologies des salles propres - Conception , construction et gestion du
fonctionnement des salles propres et de dispositifs de l'air propre
Ta slovenski standard je istoveten z: ENV 1631:1996
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
SIST ENV 1631:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 1631:2000

---------------------- Page: 2 ----------------------

SIST ENV 1631:2000

---------------------- Page: 3 ----------------------

SIST ENV 1631:2000

---------------------- Page: 4 ----------------------

SIST ENV 1631:2000

---------------------- Page: 5 ----------------------

SIST ENV 1631:2000

---------------------- Page: 6 ----------------------

SIST ENV 1631:2000

---------------------- Page: 7 ----------------------

SIST ENV 1631:2000

---------------------- Page: 8 ----------------------

SIST ENV 1631:2000

---------------------- Page: 9 ----------------------

SIST ENV 1631:2000

---------------------- Page: 10 ----------------------

SIST ENV 1631:2000

---------------------- Page: 11 ----------------------

SIST ENV 1631:2000

---------------------- Page: 12 ----------------------

SIST ENV 1631:2000

---------------------- Page: 13 ----------------------

SIST ENV 1631:2000

---------------------- Page:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST ISO 8518:2023(Main)
Workplace air - Determination of particulate lead and lead compounds - Flame and electrothermal atomic absorption spectrometric methods
ISO 8518:2022

This document specifies flame and electrothermal atomic absorption spectrometric methods for the determination of the time-weighted average mass concentration of particulate lead and lead compounds in workplace air.
These methods are typically applicable to personal sampling of the inhalable fraction of airborne particles, as defined in ISO 7708, and to static (area) sampling. It can be applied to other health-related fractions as required.
The sample dissolution procedure specifies hot plate or microwave assisted digestion, or ultrasonic extraction (see 11.2). The use of an alternative, more vigorous dissolution procedure is necessary when it is desired to extract lead from compounds present in the test atmosphere that are insoluble using the dissolution procedures described herein (see Clause 5).
The flame atomic absorption method is applicable to the determination of masses of approximately 1 µg to 200 µg of lead per sample, without dilution[1]. The electrothermal atomic absorption method is applicable to the determination of masses of approximately 0,01 µg to 0,5 µg of lead per sample, without dilution[1].
The ultrasonic extraction procedure has been validated for the determination of masses of approximately 20 µg to 100 µg of lead per sample, for laboratory-generated lead fume air filter samples[2].
The concentration range for lead in air for which this procedure is applicable is determined in part by the sampling procedure selected by the user (see 10.1).

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    31 pages
    English language
    sale 15% off
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23861:2023(Main)
Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)
EN ISO 23861:2022

This document specifies performance requirements and test methods under prescribed laboratory conditions for the evaluation of pumped samplers used in conjunction with an air sampling pump and of procedures using these samplers for the determination of semi-volatile chemical agent in workplace atmospheres. The procedures given in this document provide results only for the sum of airborne particles and vapour. The concentration is calculated in terms of mass per unit volume. This document is applicable to pumped samplers and measuring procedures using these samplers in which sampling and analysis are carried out in separate stages.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13137:2023(Main)
Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2022)
EN ISO 13137:2022

This document specifies performance requirements for battery powered pumps used for personal
sampling of chemical and biological agents in workplace air. It also specifies test methods in order to
determine the performance characteristics of such pumps under prescribed laboratory conditions.
This document is applicable to battery powered pumps having a nominal volumetric flow rate above
10 ml ⋅ min−1, as used with combinations of sampler and collection substrate for sampling of gases,
vapours, dusts, fumes, mists and fibres.
This document is primarily intended for flow-controlled pumps.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62990-1:2023/A11:2023(Amendment)
Workplace Atmospheres - Part 1: Gas detectors - Performance requirements of detectors for toxic gases
EN IEC 62990-1:2022/A11:2022

This part of IEC 62990 specifies general requirements for design, function and performance, and describes the test methods that apply to portable, transportable, and fixed equipment for the detection and concentration measurement of toxic gases and vapours in workplace atmospheres and other industrial and commercial applications. This document is applicable to continuously sensing equipment whose primary purpose is to provide an indication, alarm and/or other output function the purpose of which is to indicate the presence of a toxic gas or vapour in the atmosphere and in some cases to initiate automatic or manual protective action(s). It is applicable to equipment in which the sensor generates an electrical signal when gas is present.
This document applies to two types of equipment:
• Type HM (Health Monitoring) ‘occupational exposure’ equipment: For occupational exposure measurement, the performance requirements are focused on uncertainty of measurement of gas concentrations in the region of Occupational Exposure Limit Values (OELV). The upper limit of measurement will be defined by the manufacturer in accordance with 4.2.1.
• Type SM (Safety Monitoring) ‘general gas detection’ equipment: For general gas detection applications (e.g. safety warning, leak detection), the performance requirements are focused on alarm signalling. The upper limit of measurement will be defined by the manufacturer according to the intended use of the equipment. In general, the requirements for accuracy will be higher for Type HM equipment than for Type SM equipment. The same equipment may meet the requirements of both Type HM and Type SM. For equipment used for sensing the presence of multiple gases this document applies only to the detection of toxic gas or vapour.
This document is not applicable to equipment:
- with samplers and concentrators such as sorbents or paper tape having an irreversible indication;
- used for the measurement of gases and vapours related to the risk of explosion;
- used for the measurement of oxygen; – used only in laboratories for analysis or measurement;
- used only for process measurement purposes;
- used in the domestic environment;
- used in environmental air pollution monitoring;
- used for open-path (line of sight) area gas measurement;
- used for ventilation control in car parks or tunnels.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62990-1:2023(Main)
Workplace atmospheres - Part 1: Gas detectors - Performance requirements of detectors for toxic gases (IEC 62990-1:2019 + COR1:2019)
EN IEC 62990-1:2022

This part of IEC 62990 specifies general requirements for design, function and performance, and describes the test methods that apply to portable, transportable, and fixed equipment for the detection and concentration measurement of toxic gases and vapours in workplace atmospheres and other industrial and commercial applications. This document is applicable to continuously sensing equipment whose primary purpose is to provide an indication, alarm and/or other output function the purpose of which is to indicate the presence of a toxic gas or vapour in the atmosphere and in some cases to initiate automatic or manual protective action(s). It is applicable to equipment in which the sensor generates an electrical signal when gas is present.
This document applies to two types of equipment:
- Type HM (Health Monitoring) ‘occupational exposure’ equipment: For occupational exposure measurement, the performance requirements are focused on uncertainty of measurement of gas concentrations in the region of Occupational Exposure Limit Values (OELV). The upper limit of measurement will be defined by the manufacturer in accordance with 4.2.1.
- Type SM (Safety Monitoring) ‘general gas detection’ equipment: For general gas detection applications (e.g. safety warning, leak detection), the performance requirements are focused on alarm signalling. The upper limit of measurement will be defined by the manufacturer according to the intended use of the equipment. In general, the requirements for accuracy will be higher for Type HM equipment than for Type SM equipment. The same equipment may meet the requirements of both Type HM and Type SM. For equipment used for sensing the presence of multiple gases this document applies only to the detection of toxic gas or vapour.
This document is not applicable to equipment:
- with samplers and concentrators such as sorbents or paper tape having an irreversible indication;
- used for the measurement of gases and vapours related to the risk of explosion;
- used for the measurement of oxygen; – used only in laboratories for analysis or measurement;
- used only for process measurement purposes;
- used in the domestic environment;
- used in environmental air pollution monitoring;
- used for open-path (line of sight) area gas measurement;
- used for ventilation control in car parks or tunnels.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23320:2022(Main)
Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022)
EN ISO 23320:2022

This document specifies performance requirements and test methods under prescribed laboratory conditions for the evaluation of diffusive samplers and of procedures using these samplers for the determination of gases and vapours in workplace atmospheres.
This document is applicable to diffusive samplers and measuring procedures using these samplers in which sampling and analysis are carried out in separate stages.
This document is not applicable to
—   diffusive samplers which are used for the direct determination of concentrations,
—   diffusive samplers which rely on sorption into a liquid.
This document addresses requirements for method developers and/or manufacturers.
NOTE   For the purposes of this document a manufacturer can be any commercial or non-commercial entity.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23875:2022(Main)
Mining - Air quality control systems for operator enclosures - Performance requirements and test methods (ISO 23875:2021)
EN ISO 23875:2022

This document specifies performance and design requirements for air quality control systems for operator enclosures and their monitoring devices. The design specifications are universal in their application and do not contemplate specific mining environments. They are intended to meet identified parameters of both pressurization and respirable particulate and carbon dioxide concentrations. This document also specifies test methods to assess such parameters and provides operational and maintenance instructions. Recommendations are made for operational integration of the air quality control system.
Gases and vapours that can be a hazard in the work environment outside of the operator enclosure are excluded from this document.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1540:2022(Main)
Workplace exposure - Terminology
EN 1540:2021

This document specifies terms and definitions that are related to the assessment of workplace exposure to chemical and biological agents. These are either general terms or are specific to physical and chemical processes of air sampling, the analytical method or method performance.
The terms included are those that have been identified as being fundamental because their definition is necessary to avoid ambiguity and ensure consistency of use.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14583:2022(Main)
Workplace exposure - Volumetric bioaerosol samplers - General requirements and evaluation of performance
EN 14583:2021

This document specifies general requirements for the use and evaluation of physical and biological performance of volumetric sampling devices applied for assessing bioaerosols in the workplace.
This document lists the criteria for the selection of microbial strains that can be used for the evaluation of biological performance of samplers.
This document also describes a bioaerosol test chamber suited for assessing the biological performance of bioaerosol sampling devices.
This document is not applicable for clean room measurements.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62990-2:2021(Main)
Workplace atmospheres - Part 2: Gas detectors - Selection, installation, use and maintenance of detectors for toxic gases and vapours (IEC 62990-2:2021)
EN IEC 62990-2:2021

This document gives guidance on the selection, installation, use and maintenance of electrical
equipment used for the measurement of toxic gases and vapours in workplace atmospheres.
The primary purpose of such equipment is to ensure safety of personnel and property by
providing an indication of the concentration of a toxic gas or vapour and warning of its presence.
This document is applicable to equipment whose purpose is to provide an indication, alarm or
other output function to give a warning of the presence of a toxic gas or vapour in the
atmosphere and in some cases to initiate automatic or manual protective actions. It is applicable
to equipment in which the sensor automatically generates an electrical signal when gas is
present.
For the purposes of this document, equipment includes:
a) fixed equipment;
b) transportable equipment, and
c) portable equipment.
This document is intended to cover equipment defined within IEC 62990-1, but can provide
useful information for equipment not covered by that document.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day