SIST EN 3646-010:2015
(Main)Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 010: Protective cover for plug - Product standard
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 010: Protective cover for plug - Product standard
This European Standard defines the characteristics of protective covers for plugs in the family of bayonet coupling circular connectors, intended for use in an operating temperature range of - 65 °C to 175 °C or 200 °C continuous.
It applies to models defined in Table 2.
For plugs associated with these protective covers, see EN 3646-008.
Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Bajonettkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 010: Schutzkappe für freien Steckverbinder - Produktnorm
Série aérospatiale - Connecteurs électriques circulaires à accouplement par baïonnettes, température d'utilisation 175 °C ou 200 °C continu - Partie 010: Bouchon de vol pour fiche - Norme de produit
Aeronavtika - Konektorji, električni, okrogli, bajonetno sklapljanje, stalna delovna temperatura 175 °C ali 200 °C - 010. del: Zaščitna kapa za vtič - Standard za proizvod
Ta evropski standard določa lastnosti zaščitne kape za vtiče v družini okroglih bajonetno sklopljenih konektorjev, namenjenih uporabi pri delovni temperaturi med − 65 °C to 175 °C ali pri stalni delovni temperaturi 200 °C. Uporablja se za modele iz preglednice 2. Za vtiče, povezane s temi zaščitnimi kapami, glejte EN 3646-008.
General Information
- Status
- Published
- Publication Date
- 09-Jul-2015
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 22-Jun-2015
- Due Date
- 27-Aug-2015
- Completion Date
- 10-Jul-2015
Relations
- Effective Date
- 01-Sep-2015
Overview
EN 3646-010:2015 is a CEN product standard in the Aerospace series that specifies the characteristics of protective covers for plugs used with bayonet coupling circular electrical connectors. It applies to connector plugs designed for continuous operating temperatures from –65 °C up to 175 °C or 200 °C. The standard covers dimensional, material, marking and attachment requirements for plug protective covers and references related EN 3646 parts for connector interfaces and performance.
Key topics and requirements
- Scope and temperature rating: Protective covers suited for continuous use between –65 °C and either 175 °C or 200 °C, depending on the model.
- Dimensions and mass: Interface and housing sizes, tolerances and mass limits are defined (see Figure 1 and Table 1 in the standard). Dimensions are given in millimetres and apply after surface treatment.
- Models and materials (Table 2):
- Model A - black anodized aluminium alloy (max 200 °C)
- Model RS - nickel-plated aluminium alloy (max 200 °C)
- Model WS - olive green cadmium plated aluminium alloy (max 175 °C)
- Attachment types (Table 3):
- C - chain and eyelet
- D - chain and ring
- E - rope with PTFE jacket and eyelet
- F - rope with PTFE jacket and ring
- Hardware materials:
- Chain: stainless steel or aluminium
- Fastener: stainless steel or brass
- Ring: stainless steel or aluminium
- Eyelet: stainless steel or brass
- Sealing and retention: Sealing gasket requirements (bonded or mechanically retained) and specified attachment features are included.
- Marking:
- On product: manufacturer part number (identity block), date of manufacture (year, week), manufacturer name/trademark
- On packaging: identity block, part number, date, manufacturer name/trademark
- Normative references: EN 3646-001 (technical specification), EN 3646-002 (performance & contact arrangements), EN 3646-008 (plug product standard).
Applications and users
- Intended to protect unmated plug contacts in aerospace electrical systems, especially in high-temperature avionics and environmental exposure conditions.
- Typical users:
- Aerospace OEMs and subcontractors
- Connector manufacturers and suppliers
- Avionics design and maintenance engineers
- Procurement and quality assurance teams specifying connector accessories
- Practical uses include dust/moisture protection, mechanical protection of contacts, and ensuring thermal compatibility with high-temperature systems.
Related standards
- EN 3646-001 - Technical specification for the connector family
- EN 3646-002 - Performance and contact arrangements
- EN 3646-008 - Plug product standard (associated plugs)
EN 3646-010:2015 provides the product-level specification needed to select, manufacture and verify protective cover for plug accessories compatible with the EN 3646 bayonet coupling circular connector family, ensuring consistent performance and interchangeability in aerospace applications.
Frequently Asked Questions
SIST EN 3646-010:2015 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 010: Protective cover for plug - Product standard". This standard covers: This European Standard defines the characteristics of protective covers for plugs in the family of bayonet coupling circular connectors, intended for use in an operating temperature range of - 65 °C to 175 °C or 200 °C continuous. It applies to models defined in Table 2. For plugs associated with these protective covers, see EN 3646-008.
This European Standard defines the characteristics of protective covers for plugs in the family of bayonet coupling circular connectors, intended for use in an operating temperature range of - 65 °C to 175 °C or 200 °C continuous. It applies to models defined in Table 2. For plugs associated with these protective covers, see EN 3646-008.
SIST EN 3646-010:2015 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 3646-010:2015 has the following relationships with other standards: It is inter standard links to SIST EN 3646-010:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 3646-010:2015 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SURL]YRGLuft- und Raumfahrt - Elektrische Rundsteckverbinder mit Bajonettkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 010: Schutzkappe für freien Steckverbinder - ProduktnormSérie aérospatiale - Connecteurs électriques circulaires à accouplement par baïonnettes, température d'utilisation 175 °C ou 200 °C continu - Partie 010: Bouchon de vol pour fiche - Norme de produitAerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 010: Protective cover for plug - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3646-010:2015SIST EN 3646-010:2015en,fr,de01-september-2015SIST EN 3646-010:2015SLOVENSKI
STANDARDSIST EN 3646-010:20091DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3646-010
May 2015 ICS 49.060 Supersedes EN 3646-010:2006English Version
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 010: Protective cover for plug - Product standard
Série aérospatiale - Connecteurs électriques circulaires à accouplement par baïonnettes, température d'utilisation 175 °C ou 200 °C continu - Partie 010: Bouchon de vol pour fiche - Norme de produit
Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Bajonettkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 010: Schutzkappe für freien Steckverbinder -Produktnorm This European Standard was approved by CEN on 10 January 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3646-010:2015 ESIST EN 3646-010:2015
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...