iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1457:1999

(Main)

Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods

Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods

This European standard is a product standard for clay/ceramic flue liners with solid walls or walls with vertical perforations for use in the construction of chimneys and flue pipes which serve to convey products of combustion from fireplaces or heating appliances to the atmosphere by negative or positive pressure. It includes the flue liners used for domestic and industrial chimneys which are not structurally independent (free-standing). This standard specifies the performance requirements for factory made flue liners and chimney fittings. Testing, marking and inspection are covered by this standard.

Abgasanlagen - Keramik-Innenrohre - Anforderungen und Prüfungen

Diese Europäische Norm ist eine Produktnorm für Keramik-Innenrohre mit massiven oder vertikal gelochten Wandungen zur Verwendung in Schornsteinen und Abgasleitungen, die dazu dienen, Verbrennungsprodukte von Feuer-stätten an die Außenluft durch Über- oder Unterdruck abzuleiten. Diese Norm beinhaltet Innenrohre für Abgasanlagen und Industrieschornsteine, die nicht freistehend sind. Diese Norm enthält Festlegungen der Leistungsanforderungen an werkmäßig hergestellte Innenrohre und Formstücke. Sie enthält ferner die Anforderungen an die Prüfung, Kennzeichnung und Qualitätskontrolle.

Conduits de fumée - Conduits intérieurs en terre cuite/céramique - Exigences et méthodes d'essai

La présente norme européenne est une norme produit relatives aux conduits intérieurs en terre cuite/céramique munis de parois pleines ou de parois a alvéoles verticales utilisés dans la construction des conduits de fumée et des conduits de raccordement destinés a évacuer dans l'atmosphere, sous une pression négative ou positive, les produits de combustion produits par les cheminées ou les générateurs de chaleur. La présente norme européenne comprend les conduits intérieurs a usage domestique et les conduits de fumée industriels qui ne sont pas structurellement indépendants (autostables).

Dimniki – Keramične tuljave – Zahteve in preskusne metode

General Information

Status
Withdrawn
Publication Date
30-Nov-1999
Withdrawal Date
10-Apr-2012
ICS
91.060.40 - Chimneys, shafts, ducts
Technical Committee
BBB - Concrete, reinforced concrete and prestressed concrete
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
16-Feb-2012
Due Date
10-Mar-2012
Completion Date
11-Apr-2012
Directive
89/106/EEC - Construction products
Mandate
M/105 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on chimneys, flues and specific products
Ref Project
EN 1457:1999 - Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods

Relations

Replaced By
SIST EN 1457-2:2012 - Chimneys - Clay ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods
Effective Date
01-May-2012
Corrected By
SIST EN 1457:1999/AC:1999 - Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods
Effective Date
01-May-2012
Amended By
SIST EN 1457:1999/A1:2003 - Chimneys - Clay/ceramic flue liners - Requirements and test methods
Effective Date
22-Dec-2008
Corrected By
SIST EN 1457:1999/AC:2006 - Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods
Effective Date
22-Dec-2008
Replaced By
SIST EN 1457-1:2012 - Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operation under dry conditions - Requirements and test methods
Effective Date
01-May-2012
Replaced By
SIST EN 1457-1:2012 - Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operation under dry conditions - Requirements and test methods
Effective Date
08-Jun-2022
Corrected By
SIST EN 1457:1999/AC:1999 - Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods
Effective Date
08-Jun-2022
Corrected By
SIST EN 1457:1999/AC:2006 - Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods
Effective Date
08-Jun-2022
Amended By
SIST EN 1457:1999/A1:2003 - Chimneys - Clay/ceramic flue liners - Requirements and test methods
Effective Date
08-Jun-2022
Replaced By
SIST EN 1457-2:2012 - Chimneys - Clay ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods
Effective Date
08-Jun-2022

Buy Standard

EN 1457:1999EN 1457:1999
PreviousNext
Standard
EN 1457:1999
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1457:1999
01-december-1999
'LPQLNL±.HUDPLþQHWXOMDYH±=DKWHYHLQSUHVNXVQHPHWRGH
Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods
Abgasanlagen - Keramik-Innenrohre - Anforderungen und Prüfungen
Conduits de fumée - Conduits intérieurs en terre cuite/céramique - Exigences
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13084-9:2022(Main)
Free-standing chimneys - Part 9: Lifetime management - Monitoring, inspection, maintenance, remedial and reporting; Operations and actions required
EN 13084-9:2022

This document deals with the general requirements and the basic performance inspection, maintenance and reporting criteria for the Lifetime management, Monitoring, Inspection, Maintenance, Cleaning, Repair and Remedial work including the Reporting; Operations and Actions Required of all types of structurally independent chimneys. This document applies to any windshield, single stack, tower, mast and liners covered by the EN 13084 series.
The Lifetime management takes into account the original structural and operating design of the structurally independent chimneys under operational conditions and other actions to verify that mechanical resistance and stability and safety in use are continued at the designed for level as expected and/or adapted to changes in the operational requirements of the structure and/or its environment.
NOTE   In other parts of the EN 13084 series, rules will be given where chimney products in accordance with EN 1443 (and the relating product standards) may be used in structurally independent chimneys.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1366-10:2022(Main)
Fire resistance tests for service installations - Part 10: Smoke control dampers
EN 1366-10:2022

This document specifies test methods for smoke control dampers to assess their performance under elevated temperature or fire conditions.
It is of note that the smoke control damper to be tested could require testing to EN 1366 2 and that this is for consideration before carrying out these tests.
Smoke control damper tests are used to confirm that the furnace testing requirements of EN 12101 8 are met and EN 12101 8 is for consideration before carrying out these tests.
Smoke control dampers tested to this document are expected to be classified using EN 13501 4 and this document is expected to be considered before carrying out these tests.
To this end, this document is expected to be read in conjunction with EN 12101 8, EN 13501 4, EN 1366 2 and EN 1363 1, the latter giving further details for fire resistance testing.
For installation details, the requirements for smoke extraction ducts are for consideration and these are defined in EN 1366 8 and EN 1366 9.

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15882-2:2022(Main)
Extended application of results from fire resistance tests for service installations - Part 2: Fire dampers
EN 15882-2:2022

This document provides guidance and rules to notified bodies (for fire dampers) allowing them to produce/validate an extended field of application report for fire dampers. This document identifies the parameters that affect the fire resistance of dampers. It also identifies the factors that need to be considered when deciding whether, or by how much, the parameter can be extended when contemplating the fire resistance performance of an untested, or untestable variation in the construction.
This document explains the principles behind how a conclusion on the influence of specific parameters/constructional details relating to the relevant criteria (E, I, S) can be achieved.
This document does not cover dampers used for smoke control.
It is the intention that the application of this document makes it possible to identify which specifications to test to maximize the field of application. Some information on test programmes is given for guidance purposes.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1366-5:2021(Main)
Fire resistance tests for service installations - Part 5: Service ducts and shafts
EN 1366-5:2021

This European Standard specifies a method for determining the fire resistance of horizontal service ducts and vertical service shafts, which pass through walls or floors and enclose pipes and cables. The test examines the behaviour of ducts and shafts exposed to fire from outside and from inside the duct. This European Standard is intended to be read in conjunction with EN 1363-1.
This European Standard does not examine the risk of fire spread as a result of thermal conduction along the piping installed in service ducts or shafts, or thermal conduction through the media these pipes carry. It does not cover the risk of damage produced by thermal elongation or shortening of tubes and cables as a result of fire, or damaged pipe suspensions. This European Standard does not give guidance on how to test one, two or three sided service ducts or shafts.
NOTE   Guidance on testing service ducts and shafts of less than four sides will be covered in the extended field of application rules being developed by CEN/TC 127.
This test is unsuitable for evaluating service ducts with internal barriers at walls and floors.
Whilst the walls of service ducts or shafts tested to this method may provide specified levels of integrity or insulation, testing to this European Standard does not replace the testing of the functional endurance of small electrical cables which is covered in EN 50200.
Fire resistance testing of ducts for air distribution systems is covered in EN 1366-1.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16475-7:2016+A1:2020(Main)
Chimneys - Accessories - Part 7: Rain caps - Requirements and test methods
EN 16475-7:2016+A1:2020

This European Standard specifies requirements and test methods for rain caps that are used as components, subject to flue gas, in order to prevent rain entry into the chimneys. Rain caps already tested together with system chimney products or other chimney components, e.g. terminals, are not covered by this standard. Rain caps incorporating a bird guard are also included. It also specifies the requirements for marking, manufacturers’ instruction, product information and evaluation of conformity.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1366-1:2014+A1:2020(Main)
Fire resistance tests for service installations - Part 1: Ventilation ducts
EN 1366-1:2014+A1:2020

This Part of EN 1366 specifies a method for determining the fire resistance of vertical and horizontal ventilation ducts including those access panels, which are integral part of the tested ducts. The test examines the behaviour of ducts exposed to fire from the outside (duct A) and fire inside the duct (duct B). This Standard is used in conjunction with EN1363-1.
Annex A provides general guidance and gives background information.
This European Standard is not applicable to:
a)   ducts whose fire resistance depends on the fire resistance performance of a ceiling or wall(where ducts are located in cavities enclosed by fire-resistant shafts or ceilings);
b)   ducts containing fire dampers at points where they pass through fire separations;
c)   one, two or three sided ducts;
d)   fixing of suspension devices (e.g. anchors) to floors or walls.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16475-4:2020(Main)
Chimneys - Accessories - Part 4: Flue dampers - Requirements and test methods
EN 16475-4:2020

This European standard specifies the requirements and test methods for flue dampers that are used as
components, carrying flue gas, in order to limit the flow in a chimney.
Flue dampers may be manually adjusted, sited in connecting flue pipes or chimneys, in order to reduce the burning rate (solid fuel stoves/fireplaces) or to work as a shut-off slide preventing back flow of soot during cleaning of the chimney, or mechanically driven for reducing/closing the flue, in order to reduce the Stand-by losses or to prevent the backflow of the flue gas e.g. in case of multi-served chimneys.
This European standard covers only flue dampers incorporated in a housing and installed inside a building. Flue dampers already tested together with system chimney products or other chimney components, e.g. flue liners, connecting flue pipes, are not covered by this standard.
This European standard also specifies the requirements for marking, manufacturers’ instruction, product
information, Assessment and Verification of Constancy of Performance (AVCP), cleaning and maintenance.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16475-6:2020(Main)
Chimneys - Accessories - Part 6: Access components - Requirements and test methods
EN 16475-6:2020

This European Standard specifies the requirements and test methods for access components comprising a frame and a door or doors which provide access to the flue of a chimney for the purpose of inspection or cleaning.
Access components for higher nominal working temperature than 450 °C, positive pressure and wet applications are not covered by this standard.
The standard is limited to access components with a door opening area up to 0,27 m2.
Products not freely ventilated are excluded from this standard.
This standard also specifies the requirements for marking, manufacturers’ instruction, product information and evaluation of conformity.
Access components already tested together with system chimney products or other chimney components, e.g. flue liners, are not covered by this standard.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16475-1:2020(Main)
Chimneys - Accessories - Part 1: Chimney silencers - Requirements and test methods
EN 16475-1:2020

This European Standard specifies requirements and test methods for flue gas silencers made of metal that are used as accessories in order to reduce the noise level of combustions appliances.
The standard covers silencers in the connecting flue pipes and on top of chimneys.
This standard does not cover silencers installed as chimney sections. This standard excludes active silencers.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1366-12:2014+A1:2020(Main)
Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork
EN 1366-12:2014+A1:2019

This part of EN 1366 specifies a method for determining the fire resistance of non-mechanical fire barriers installed in fire separating elements designed to withstand heat and the passage of smoke and gases at high temperature. This European Standard is used in conjunction with EN 1363-1 and EN 1366-2.
This European Standard is not suitable for testing non-mechanical fire barriers in suspended ceilings without modification.
This European Standard is not suitable for testing fire dampers, see EN 1366-2.
This European Standard is not suitable for testing such products as air transfer grilles, as the pressures and flows involved are different and may cause differing behaviour.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day