SIST EN 13087-7:2001/A1:2002
(Amendment)Protective helmets - Test methods - Part 7: Flame resistance
Protective helmets - Test methods - Part 7: Flame resistance
UAP of 4 months (TC Res C165/2000) (CC/01011)
Schutzhelme - Prüfverfahren - Teil 7: Flammenbeständigkeit
Casques de protection - Méthodes d'essai - Partie 7: Résistance a la flamme
Varovalne čelade - Preskusne metode - 7. del: Odpornost proti plamenu
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13087-7:2001/A1:2002
01-junij-2002
9DURYDOQHþHODGH3UHVNXVQHPHWRGHGHO2GSRUQRVWSURWLSODPHQX
Protective helmets - Test methods - Part 7: Flame resistance
Schutzhelme - Prüfverfahren - Teil 7: Flammenbeständigkeit
Casques de protection - Méthodes d'essai - Partie 7: Résistance a la flamme
Ta slovenski standard je istoveten z: EN 13087-7:2000/A1:2001
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
13.340.20 Varovalna oprema za glavo Head protective equipment
SIST EN 13087-7:2001/A1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 13087-7:2000/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2001
ICS 13.220.40; 13.340.20
English version
Protective helmets - Test methods - Part 7: Flame resistance
Casques de protection - Méthodes d'essai - Partie 7: Schutzhelme - Prüfverfahren - Teil 7:
Résistance à la flamme Flammenbeständigkeit
This amendment A1 modifies the European Standard EN 13087-7:2000; it was approved by CEN on 21 October 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13087-7:2000/A1:2001 E
worldwide for CEN n
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.